scholarly journals Potential of tidal power plants on Tibo Beach with spektrum method

2022 ◽  
Vol 1212 (1) ◽  
pp. 012039
Author(s):  
Setiyawan ◽  
A Rusdin ◽  
T Amaliah ◽  
Olphino

Abstract As time evolved, the demand for electrical energy also increased. As a result, renewable energy is needed to replace fossil fuels as fuel for electricity generation. Tidal water is one of the renewable alternative energy sources used as fuel for electricity generation. The tides will never run out and can also be predicted. One method that can predict data about waves is the Spectrum Method. Tide prediction data can be indicated by carrying out tidal height observations for 15 days at Tibo Beach, Donggala Regency, Central Sulawesi. Based on observations, the data obtained are the highest high water level (HHWL) is 2.4 meters, and the lowest low water level (LLWL) is 0.1 meters. Also, the type of tides on the Tibo coast is a type of mixed waves that tend to double daily, there are two tides with high water and two tides with low water with different water levels. Because the value of formzahl is 0.312. With a 2.4 meter high HHWL and a sea area of 35.4 km2, the electricity generated is 13.08 MW.

Author(s):  
Bima Sakti ◽  
Nur Rani Alham ◽  
Ahmad Nur Fajri ◽  
Ilham Rizal Ma’rif

<em>The need for electricity in Indonesia is very important considering the limited resources and the lack of manpower, making Indonesia desperately need to increase electricity generation. One source of energy that can be converted into electrical energy is tidal barrage using the tidal barrage method. The application of this energy is still very small in Indonesia but there are a number of areas that have the potential to be implemented by the power plant. Tidal power plants that utilize the potential energy contained in the differences in tides and tides of sea water by trapping water in dams and then moving water turbines and when the water turbine is connected to a generator can produce electrical energy. Related to how the output of the generated power can it is known by looking at what height the water level drives the turbine. This type of power plant is environmentally friendly because it does not damage the natural ecosystem and the dam can be used for various activities.</em><em></em>


2022 ◽  
Vol 1212 (1) ◽  
pp. 012038
Author(s):  
H Azikin ◽  
Nurhidayat ◽  
E Affandy ◽  
S S Syahruddin

Abstract The use of energy, especially electrical power, is needed by the wider community— lots of alternative energy from nature, especially in Indonesia that can be utilized to produce electricity. One of the newest alternative examples is the energy produced by tides. Tidal energy is a type of renewable energy that is relatively more predictable in number. One method that can process the waves is the Least Square Method. Where the results of data processing using this method can be known based on tidal observations for 15 days on Toaya Beach located in Donggala Regency, Central Sulawesi, the types of tidal types that occur based on the results of Formzahl’s count is 0.357 that the tidal types that occur are varied types leaning to double daily, with a Root Mean Square Error (RMSE) of 0.028, which means that the difference between predictive results and observational data is accurate. Then also obtained the value of the design water level elevation that is the highest high water level (HHWL) is 2.7 meters, and the lowest low water level (LLWL) is -0.3 meters with a height difference is 3.0 meters. So with the high height difference, the total energy generated by two times a day with a sea area of 9 km2 which is capable of producing energy movement from seawater can be calculated the potential energy generated from the waves of Toaya Beach, which is 5,53 MW.


2018 ◽  
Vol 204 ◽  
pp. 04013 ◽  
Author(s):  
Rima Septiani Prastika ◽  
A.N. Afandi ◽  
Dwi Prihanto

Recently, electric usages are increasing every year by year in many sectors. In facts, fossil fuels have been fueled to produce electrical energy availability at many power plants which are very limited for the sustainable procurement. Developing and implementing renewable energy sources should be urgently promoted to reduce the dependence on fossil fuels that have been fueled to generate electricity for the long period throughout various power plant combinations. In expectation, the natural source of electrical energy which environmentally friendly and easy to obtain in nature is recommended to explore for the existing energy producers. The natural source of energy can be operated as an alternative power plant to reduce environmental effects and to decrease air contaminants. These works cover those opportunities. In these studies, the method used is a quantitative category with collected primary and secondary data for all evaluations and mitigations. In general, these works are also designed for identifying problems and looking for literature, data collection, processing stage, analysis phase, and final conclusion. The data used is defined in terms of temperature, air pressure, and wind speed. The collected data are supposed to the Purwoharjo City of Banyuwangi Regency, with 10 meters above ground level. Naturally, the wind speed is about 3.5 m/s to 4 m/s and the average temperature is 300° Kelvin. The potentially generated wind energy at a single point of coordinates is around 85.17 Wh.


Author(s):  
Mohammed Kdair Abd

Technical and technological advances in alternative energy sources have led many countries to add green energy to their power plants to reduce carbon emissions and air pollution. At present, many electricity companies are looking to use alternative sources of energy because of high electrical energy prices. Wind energy is more useful than many renewable energies such as solar, heat, biomass, etc. The Wind Energy Conversion System (WECS) is a system that converts the kinetic energy of the wind into electrical energy to feed the known loads. WECS can be found in a variety of technology. Climate change and load demand are essential determinants of WECS optimization modelling. In this paper, proposed a strategy focused primarily on economic analysis WECS. The strategy based on a weather change to find the optimal designing and modelling for four different types of WECS using HOMER software. Finally, several criteria were used to determine which type of WECS was the most profitable investment and less payback period.


Author(s):  
Александр Григорьевич Комков ◽  
Александр Константинович Сокольский

В статье рассмотрено современное состояние энергоснабжения и перспективы развития альтернативных источников энергии на территории Крайнего Севера. Отмечено, что несмотря на острую потребность во внедрении возобновляемых источников энергии, установленные мощности всех ветряных и солнечных электростанций в регионе не превышают 7-8 МВт. Также в работе рассчитаны технический и экономический потенциал ветровой энергии региона, на основании которых подобрана наиболее эффективная установка. The article discusses the current state of energy supply and the prospects for the development of alternative energy sources in the Far North. It is noted that despite the urgent need for the introduction of renewable energy sources, the installed capacities of all wind and solar power plants in the region do not exceed 7-8 MW. Also, the technical and economic potential of the region’s wind energy was calculated based on which the most efficient installation was selected.


The Holocene ◽  
2020 ◽  
pp. 095968362098168
Author(s):  
Christian Stolz ◽  
Magdalena Suchora ◽  
Irena A Pidek ◽  
Alexander Fülling

The specific aim of the study was to investigate how four adjacent geomorphological systems – a lake, a dune field, a small alluvial fan and a slope system – responded to the same impacts. Lake Tresssee is a shallow lake in the North of Germany (Schleswig-Holstein). During the Holocene, the lake’s water surface declined drastically, predominately as a consequence of human impact. The adjacent inland dune field shows several traces of former sand drift events. Using 30 new radiocarbon ages and the results of 16 OSL samples, this study aims to create a new timeline tracing the interaction between lake and dunes, as well, as how both the lake and the dunes reacted to environmental changes. The water level of the lake is presumed to have peaked during the period before the Younger Dryas (YD; start at 10.73 ka BC). After the Boreal period (OSL age 8050 ± 690 BC) the level must have undergone fluctuations triggered by climatic events and the first human influences. The last demonstrable high water level was during the Late Bronze Age (1003–844 cal. BC). The first to the 9th century AD saw slightly shrinking water levels, and more significant ones thereafter. In the 19th century, the lake area was artificially reduced to a minimum by the human population. In the dunes, a total of seven different phases of sand drift were demonstrated for the last 13,000 years. It is one of the most precisely dated inland-dune chronologies of Central Europe. The small alluvial fan took shape mainly between the 13th and 17th centuries AD. After 1700 cal. BC (Middle Bronze Age), and again during the sixth and seventh centuries AD, we find enhanced slope activity with the formation of Holocene colluvia.


Author(s):  
Kau-Fui Vincent Wong ◽  
Guillermo Amador

As society continues advancing into the future, more energy is required to supply the increasing population and energy demands. Unfortunately, traditional forms of energy production through the burning of carbon-based fuels are dumping harmful pollutants into the environment, resulting in detrimental, and possibly irreversible, effects on our planet. The burning of coal and fossil fuels provides energy at the least monetary cost for countries like the US, but the price being paid through their negative impact of our atmosphere is difficult to quantify. A rapid shift to clean, alternative energy sources is critical in order to reduce the amount of greenhouse gas emissions. For alternative energy sources to replace traditional energy sources that produce greenhouse gases, they must be capable of providing energy at equal or greater rates and efficiencies, while still functioning at competitive prices. The main factors hindering the pursuit of alternative sources are their high initial costs and, for some, intermittency. The creation of electrical energy from natural sources like wind, water, and solar is very desirable since it produces no greenhouse gases and makes use of renewable sources—unlike fossil fuels. However, the planning and technology required to tap into these sources and transfer energy at the rate and consistency needed to supply our society comes at a higher price than traditional methods. These high costs are a result of the large-scale implementation of the state-of-the-art technologies behind the devices required for energy cultivation and delivery from these unorthodox sources. On the other hand, as fossil fuel sources become scarcer, the rising fuel costs drive overall costs up and make traditional methods less cost effective. The growing scarcity of fossil fuels and resulting pollutants stimulate the necessity to transition away from traditional energy production methods. Currently, the most common alternative energy technologies are solar photovoltaics (PVs), concentrated solar power (CSP), wind, hydroelectric, geothermal, tidal, wave, and nuclear. Because of government intervention in countries like the US and the absence of the need to restructure the electricity transmission system (due to the similarity in geographical requirements and consistency in power outputs for nuclear and traditional plants), nuclear energy is the most cost competitive energy technology that does not produce greenhouse gases. Through the proper use of nuclear fission electricity at high efficiencies could be produced without polluting our atmosphere. However, the initial capital required to erect nuclear plants dictates a higher cost over traditional methods. Therefore, the government is providing help with the high initial costs through loan guarantees, in order to stimulate the growth of low-emission energy production. This paper analyzes the proposal for the use of nuclear power as an intermediate step before an eventual transition to greater dependence on energy from wind, water, and solar (WWS) sources. Complete dependence on WWS cannot be achieved in the near future, within 20 years, because of the unavoidable variability of these sources and the required overhaul of the electricity transmission system. Therefore, we look to nuclear power in the time being to help provide predictable power as a means to reduce carbon emissions, while the other technologies are refined and gradually implemented in order to meet energy demand on a consistent basis.


2019 ◽  
Vol 4 (1) ◽  
pp. 7
Author(s):  
Faulincia Faulincia

<p>Referring to Law Number 30 of 2007 concerning Energy, the development of techniques the conversion of electrical energy by using alternative energy sources is interesting for followed for the past few years. This paper discusses calculation analysis power potential of ocean wave conversion using the Oscilating Water system Column (OWC) in the marine area of Indonesia. This system was chosen because it has many advantages compared to other systems and in accordance with the marine and coastal areas of Indonesia. From the calculation of power, the smallest power that can be produced is equal to 348.5838 Watts while the biggest power that can be produced is 623291.4 Watts The application of the oscillating water column system in Kendari waters with an efficiency of 11.971%.<br />Keywords. oscillating water column (OWC), ocean wave energy, electrical energy, power potential,<br />wavelength</p>


2021 ◽  
Author(s):  
Zeynu Shamil Awol ◽  
Rezika Tofike Abate

Abstract Biomass energy is renewable energy source that comes from the material of plants and animals. Forms of biomass energy are bio-ethanol, bio methanol, and biodiesel. Bio-ethanol is one of the most important alternative energy sources that substitute the fossil fuels. The focus of this research is to produce bio-ethanol from waste office paper. Five laboratory experiments were conducted to produce bio-ethanol from wastepaper. The wastepaper was dried in oven and cut in to pieces. Then it passed through dilute acid hydrolysis, fermentation and distillation process respectively. High amount of ethanol was observed at 20 ml/g (liquid to solid ratio) and at the time of 2hr. Cost and economic analysis for ethanol production from wastepaper was performed. Results from the analysis indicated a paper to ethanol plant was feasible from the economic point of view with rate of return (RR) 38.61% and the payback period of 2.2 years.


2016 ◽  
Vol 19 (3) ◽  
pp. 96-109
Author(s):  
Phung Thi Kim Le ◽  
Viet Tan Tran ◽  
Thien Luu Minh Nguyen ◽  
Viet Vuong Pham ◽  
Truc Thanh Nguyen ◽  
...  

Finding alternative energy sources for fossil fuels was a global matter of concern, especially in developing countries. Rice husk, an abundant biomass in Viet Nam, was used to partially replace fossil fuels by gasification process. The study was conducted on the pilot plant fixed bed up-draft gasifier with two kind of gasification agents, pure air and air-steam mixture. Mathematical modeling and computer simulations were also used to describe and optimize the gasification processes. Mathematical modeling was based on Computational Fluid Dynamics method and simulation was carried by using Ansys Fluent software. Changes in outlet composition of syngas components (CO, CO2, CH4, H2O, H2) and temperature of process, in relation with ratio of steam in gasification agents, were presented. Obtained results indicated concentration of CH4, H2 in outlet was increased significantly when using air-steam gasification agents than pure air. The discrepancies among the gasification agents were determined to improve the actual process.


Sign in / Sign up

Export Citation Format

Share Document