scholarly journals Effects of varying chemical composition with x = 0.1 – 0.7 on magnetic properties of soft ferrite Ni1-xZnxFe2O4

2019 ◽  
Vol 620 ◽  
pp. 012105
Author(s):  
N Idayanti ◽  
Dedi ◽  
T Kristiantoro ◽  
N Sudrajat ◽  
D Mulyadi ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Chemical Composition ◽  
Soft Ferrite

scholarly journals Optimization of Magnetic Properties of Magnetic Microwires by Post-Processing

Processes ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 1006
Author(s):  
Valentina Zhukova ◽  
Paula Corte-Leon ◽  
Lorena González-Legarreta ◽  
Ahmed Talaat ◽  
Juan Maria Blanco ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Chemical Composition ◽  
Hysteresis Loops ◽  
Structural Features ◽  
Post Processing ◽  
Soft Magnetic ◽  
Magnetic Microwires ◽  
Prepared State ◽  
Induced Magnetic Anisotropy ◽  
Selection Of

The influence of post-processing conditions on the magnetic properties of amorphous and nanocrystalline microwires has been thoroughly analyzed, paying attention to the influence of magnetoelastic, induced and magnetocrystalline anisotropies on the hysteresis loops of Fe-, Ni-, and Co-rich microwires. We showed that magnetic properties of glass-coated microwires can be tuned by the selection of appropriate chemical composition and geometry in as-prepared state or further considerably modified by appropriate post-processing, which consists of either annealing or glass-coated removal. Furthermore, stress-annealing or Joule heating can further effectively modify the magnetic properties of amorphous magnetic microwires owing to induced magnetic anisotropy. Devitrification of microwires can be useful for either magnetic softening or magnetic hardening of the microwires. Depending on the chemical composition of the metallic nucleus and on structural features (grain size, precipitating phases), nanocrystalline microwires can exhibit either soft magnetic properties or semi-hard magnetic properties. We demonstrated that the microwires with coercivities from 1 A/m to 40 kA/m can be prepared.

scholarly journals Impact of ZrO2 Additive on Microstructure, Magnetic Properties, and Temperature Dependence of the Initial Permeability of LiTiZn Ferrite Ceramics

2021 ◽  
Author(s):  
Andrey Malyshev ◽  
Anna B. Petrova ◽  
Anatoly P. Surzhikov
Keyword(s):  
Magnetic Properties ◽  
Temperature Dependence ◽  
Defect Structure ◽  
Initial Permeability ◽  
Experimental Temperature ◽  
Mathematical Treatment ◽  
Experimental Temperature Dependence ◽  
Average Grain Size ◽  
Soft Ferrite ◽  
Microstructure And Magnetic Properties

Abstract The effect of the diamagnetic ZrO2 addition on the microstructure and magnetic properties of LiTiZn ferrite ceramics, including the shape and parameters of the temperature dependence of the initial permeability, has been investigated. The defect structure of ferrite ceramic samples is assessed according to our earlier proposed method based on mathematical treatment of the experimental temperature dependencies of the initial permeability. The method is recommended for defects monitoring of soft ferrite ceramics and ferrite products. It was found that the defect structure of ferrite ceramics increased by 350% with an increase in the concentration of the ZrO2 additive in the range of (0–0.5) wt.%. In this case, for the same samples, the increase in the true physical broadening of reflections is only 20%, and the coercive force by 50%. Simultaneously, the maximum of the experimental temperature dependence of the initial permeability dropped by 45%. The microstructure of all samples is characterized with a similar average grain size according to the SEM data. However, samples with the 0.5wt.% of ZrO2 are characterized by the formation of conglomerates. A linear relationship was obtained between the defect structure and the width of the reflections, which indicates that this parameter is related to the elastic stress of ferrite ceramics.

Impact of thermal oxidation on chemical composition and magnetic properties of iron nanoparticles

2018 ◽  
Vol 458 ◽  
pp. 346-354 ◽  
Author(s):  
Marcin Krajewski ◽  
Katarzyna Brzozka ◽  
Mateusz Tokarczyk ◽  
Grzegorz Kowalski ◽  
Sabina Lewinska ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Chemical Composition ◽  
Thermal Oxidation ◽  
Iron Nanoparticles

Effect of Ba Strate Addition on Magnetic Properties of Ba-System W-Type Ferrite Magnets

2007 ◽  
Vol 534-536 ◽  
pp. 1305-1308
Author(s):  
Hiroshi Yamamoto ◽  
Hiroaki Nishio ◽  
Yoshihito Sawayama
Keyword(s):  
Magnetic Properties ◽  
Chemical Composition ◽  
Physical Properties ◽  
Optimum Conditions ◽  
Nitrogen Gas ◽  
Lattice Constants ◽  
Typical Sample ◽  
Gas Atmosphere ◽  
Drying Condition ◽  
Sintering Condition

Experiment was carried out to investigate the effect of Ba Stearate as a reducing agent on the magnetic and physical properties of anisotropic BaFe2-W type ferrite magnets. It was found that the magnetic properties of BaO･8.5Fe2O3 were improved by adding 0.3 wt% of Ba Stearate, 0.5 wt% of SiO2, and 0.5 wt% of CaO together. The optimum conditions for making magnets were as follows; chemical composition: Ba1.029Ca0.127Si0.097C0.053Fe2+ 2.456Fe3+ 15.392O27, semisintering condition: 1350 °C×4.0 h in nitrogen gas atmosphere, drying condition: 180 °C×2.0 h in air, sintering condition: 1160 °C×1.5 h in nitrogen gas atmosphere. Magnetic and physical properties of a typical sample were Jm = 0.46 T, Jr = 0.43 T, HcJ = 182.3 kA/m, HcB = 177.2 kA/m, (BH)max = 33.8 kJ/m3, TC = 495 °C and KA = 2.65×105 J/m3 and HA = 1332 kA/m. The lattice constants of this compound were a = 5.883×10-10 m, c = 32.92×10-10 m, and c/a = 5.596.

Structure and Magnetic Properties of Co-Substituted Strontium Hexaferrite

2014 ◽  
Vol 979 ◽  
pp. 200-203 ◽  
Author(s):  
Pannipa Chaya ◽  
Tula Jutarosaga ◽  
Wandee Onreabroy
Keyword(s):  
Crystal Structure ◽  
Magnetic Properties ◽  
Coercive Force ◽  
Crystallite Size ◽  
Strontium Hexaferrite ◽  
X Ray Diffraction ◽  
Ceramic Method ◽  
Lattice Constants ◽  
Structure Morphology ◽  
Soft Ferrite

The strontium hexaferrite (SrFe12O19) and Co-substituted strontium hexaferrite (SrCoFe11O19) were prepared by ceramic method. The milled mixture of Fe2O3, SrCO3 and CoO powders were calcined at 1100°C and pellets sintered at 1300°C in air. The crystal structure, morphology and magnetic properties of samples have been investigated by X-ray diffraction (XRD), scanning electron microscope (SEM) and vibrating sample magnetometer (VSM), respectively. The crystal structure of SrFe12O19 was hexaferrite with the crystallite size and the lattice constants a and c of 59.6 nm, 5.8 Å, and 23.0 Å, respectively. Also, the crystal structure of SrCoFe11O19 was hexaferrite with the crystallite size and the lattice constants a and c of 63.7 nm, 5.9 Å and 23.0 Å, respectively. The morphology of obtained samples changed from hexagonal rods to discs shape and grain sizes increased with the increase of doped Co in SrFe12O19. SrFe12O19 with the coercive force (Hc) of 2,133 Oe was classified as hard ferrite magnetic. While, Co-substituted strontium hexaferrite (SrCoFe11O19) was soft ferrite magnetic with coercive force of 64 Oe. Results indicated that magnetic properties of samples such as hard ferrite magnetic and soft ferrite magnetic showed great dependence on the cobalt additive in strontium.

The Influence Factors of Silicon Steel Magnetic Property

2014 ◽  
Vol 884-885 ◽  
pp. 345-348 ◽  
Author(s):  
Lei Shang ◽  
Hai Li Yang ◽  
Hong Xu ◽  
Yun Gang Li
Keyword(s):  
Magnetic Properties ◽  
Magnetic Property ◽  
Chemical Composition ◽  
Influence Factors ◽  
Dimensional Accuracy ◽  
Silicon Steel ◽  
Factors Affecting ◽  
Size Type ◽  
The Impact

Magnetic properties of silicon steel mainly depend on the internal organizational structure and chemical composition. The main factors affecting magnetic properties of silicon steel are analyzed and summarized, including grain size, inclusions (size, type, quantity, and morphology), crystal texture, internal stress, dimensional accuracy, the surface quality of steels, and chemical composition. The impact mechanism of the factors influencing silicon steel magnetic property is explained and these influence factors are interrelated.

Sign in / Sign up

Export Citation Format

Share Document