scholarly journals Enhancement of porous asphalt mixture for resisting environmental conditions using modified asphalt

2020 ◽  
Vol 737 ◽  
pp. 012118
Author(s):  
Miran Bahyam Ahmed ◽  
Alaa Hussein Abed ◽  
Yasir Mawla Hammood Al-Badran
Keyword(s):  
Environmental Conditions ◽  
Asphalt Mixture ◽  
Porous Asphalt ◽  
Modified Asphalt

scholarly journals Study on Compatibility and Rheological Properties of High-Viscosity Modified Asphalt Prepared from Low-Grade Asphalt

Materials ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 3776 ◽  
Author(s):  
Mingliang Li ◽  
Feng Zeng ◽  
Ruigang Xu ◽  
Dongwei Cao ◽  
Jun Li
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Material Design ◽  
High Viscosity ◽  
Low Grade ◽  
Local Climate ◽  
Porous Asphalt ◽  
Modified Asphalt ◽  
Before And After ◽  
High Temperature Condition

High-viscosity modified asphalt is mainly used as a binder for porous asphalt in China and Japan. In order to meet the demand for using porous asphalt under high temperature condition in Africa, high-viscosity asphalt made from low-grade matrix asphalt, which is commonly used in Africa is investigated. Based on simulation of local climate in Africa, the suitable range of high viscosity additive content for different matrix asphalt was obtained by analyzing dynamic viscosity of the asphalt. Through PG high temperature grading, multi-stress repeated creep, accelerated fatigue, temperature sweep and other tests, changes of high temperature, anti-fatigue and anti-shear indicators before and after modification were compared and analyzed and effects of different matrix asphalt were also studied. Finally, considering engineering requirements, mixing and compaction temperatures of various high-viscosity modified asphalt were determined through study of viscosity-temperature characteristics. This research provides a support for preparation of high-viscosity modified asphalt and porous asphalt mixture by using low grade asphalt. The research achievements can help to guide the material design and application of porous asphalt in Africa and other high temperature areas.

scholarly journals MODIFIED ASPHALT MIXTURES RESISTANCE TO PERMANENT DEFORMATIONS

2007 ◽  
Vol 13 (4) ◽  
pp. 307-315 ◽  
Author(s):  
Piotr Radziszewski
Keyword(s):  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Short Term ◽  
Porous Asphalt ◽  
Modified Asphalt ◽  
Road Pavement ◽  
In Situ Conditions ◽  
Modified Binders

Permanent deformations, primarily in the form of ruts, are one of the basic asphalt pavement damages impairing its service properties. Application of appropriate asphalt mixtures and binder modification are effective methods for improving asphalt courses resistance. While being manufactured, stored, fitted into a road pavement and during long term service, bitumen binders and asphalt mixtures are subject to continuous unfavourable ageing processes during which pavement courses characteristics change considerably, resistance to permanent deformations being among them. This article presents rut and dynamic creep test results of concrete, SMA (stone mastic asphalt), MNU (thin courses of non‐continuous grain mixtures), Superpave mixture and porous asphalt mixture of two air void content percentages: 15 %, 20 %. Asphalt concrete mixtures, MNU's and porous asphalt mixtures contained elastomer, plastomer and fine rubber modified binders. Samples for laboratory rut tests were made by slab compaction because this method, as the author's previous research had shown, was the closest to ‘in‐situ’ conditions. Resistance to permanent deformations of the examined specimens was evaluated before aging, after technological aging (short term ageing) and after service ageing (long‐term ageing). The test results show that resistance to permanent deformations depends on the kind of asphalt mixture and binder applied. Concrete asphalts with fine rubber modified bitumens and concrete asphalts with 7 % polymer modified binders as well as SMA's and Superpave mixtures with unmodified binders appeared to be most resistant to permanent deformations after a long‐term laboratory ageing. It was proved that the overall evaluation of resistance to permanent deformations could be obtained by rut and creep testing of asphalt mixtures exposed to short‐ and long‐term ageing. Simultaneous determining 4 parameters: maximum rut depth after short‐term ageing, rutting coefficient after operational ageing, stiffness creeping modulus after long‐term ageing and cumulated deformation after short‐term ageing, facilitates full characteristics of modified asphalt mixes designed to be built in the wearing course of a road pavement.

scholarly journals Experimental Study of Low Temperature Performance of Porous Asphalt Mixture

2021 ◽  
Vol 11 (9) ◽  
pp. 4029
Author(s):  
Jian Wang ◽  
Pui-Lam Ng ◽  
Yuhua Gong ◽  
Han Su ◽  
Jinsheng Du
Keyword(s):  
Low Temperature ◽  
Test Temperature ◽  
Asphalt Mixture ◽  
Aging Condition ◽  
Porous Asphalt ◽  
Bending Strain ◽  
Temperature Performance ◽  
Temperature Environment ◽  
Modifier Content ◽  
Low Temperature Performance

Porous asphalt mixture can be used as a road surface paving material with the remarkable advantage to prevent water accumulation and ponding. However, the performance of porous asphalt mixture in low temperature environment has not been thoroughly investigated, and this forms the subject of research in the present study. The mineral aggregate gradation of porous asphalt mixture was designed based on Bailey method, and the low temperature performance of porous asphalt mixture was studied by means of the low temperature bending test. The factors affecting the low temperature performance of porous asphalt mixture were analyzed through the orthogonal experimental design method, and the effects of porosity, modifier content, aging condition, and test temperature on the low temperature performance of porous asphalt mixture were evaluated. The results showed that the modifier content was the most important factor affecting the low temperature performance of porous asphalt mixture, followed by the test temperature, while the porosity and the aging condition were the least. Among the three performance evaluation indicators, namely the flexural tensile strength, maximum bending strain, and bending stiffness modulus, the maximum bending strain had the highest sensitivity to the porosity. It can be seen from the single factor influence test of porosity that there existed an approximately linear relationship between the maximum bending strain and the porosity of porous asphalt mixture, and the maximum bending strain decreased with increasing porosity. Furthermore, in order to ensure the good working performance of porous asphalt mixture in low temperature environment, the porosity should also satisfy the required limits of the maximum bending strain.

Performance evaluation of tourmaline modified asphalt mixture based on grey target decision method

2019 ◽  
Vol 205 ◽  
pp. 137-147 ◽  
Author(s):  
Qian Chen ◽  
Chaohui Wang ◽  
Penghui Wen ◽  
Xiaolong Sun ◽  
Tengteng Guo
Keyword(s):  
Performance Evaluation ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Decision Method
Sign in / Sign up

Export Citation Format

Share Document