scholarly journals The experimental studies of punching shear behaviour of reinforced concrete flat slab with the inclusion of steel fibre: Overview

2020 ◽  
Vol 849 ◽  
pp. 012087
Author(s):  
N F Zamri ◽  
R N Mohamed ◽  
Dinie Awalluddin
Keyword(s):  
Reinforced Concrete ◽  
Steel Fibre ◽  
Experimental Studies ◽  
Punching Shear ◽  
Shear Behaviour ◽  
Flat Slab

scholarly journals Experimental Studies on Punching Shear and Impact Resistance of Steel Fibre Reinforced Slag Based Geopolymer Concrete

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Srinivasan Karunanithi
Keyword(s):  
Energy Absorption ◽  
Steel Fibre ◽  
Impact Load ◽  
Impact Resistance ◽  
Experimental Studies ◽  
Absorption Capacity ◽  
Punching Shear ◽  
Geopolymer Concrete ◽  
Energy Absorption Capacity ◽  
Ultimate Failure

The study was focused on slag based geopolymer concrete with the addition of steel fibre. The slag based geopolymer concrete was under shear load and sudden impact load to determine its response. The punching shear represents the load dissipation of the material and the energy absorption capacity of the geopolymer concrete to impact load. The various percentage of steel fibre in the slag based geopolymer concrete was 0.5%, 1.0%, and 1.5%. Overall the dosage 0.5% of steel fibre reinforced slag based geopolymer shows better results with a punching shear of 224 kN and 1.0% of steel fibre incorporated geopolymer concrete had the better energy absorption capacity with 3774.40 N·m for first crack toughness and 4123.88 N·m for ultimate failure toughness.

Punching shear behaviour of shear reinforced concrete slabs

2015 ◽  
Vol 168 (6) ◽  
pp. 402-420 ◽  
Author(s):  
Kyoung-Kyu Choi ◽  
Gia Toai Truong ◽  
Seon-Du Kim ◽  
In-Rak Choi
Keyword(s):  
Reinforced Concrete ◽  
Punching Shear ◽  
Shear Behaviour ◽  
Concrete Slabs ◽  
Reinforced Concrete Slabs

scholarly journals Shear Behaviour of RC Beams Strengthened by Various Ultrahigh Performance Fibre-Reinforced Concrete Systems

2020 ◽  
Vol 2020 ◽  
pp. 1-18 ◽  
Author(s):  
Walid Mansour ◽  
Bassam A. Tayeh
Keyword(s):  
Reinforced Concrete ◽  
Mechanical Performance ◽  
Experimental Studies ◽  
Element Model ◽  
Shear Behaviour ◽  
Fibre Reinforced Concrete ◽  
Rc Beams ◽  
Shear Span ◽  
Depth Ratio ◽  
Normal Strength

This study presents a numerical investigation on the shear behaviour of shear-strengthened reinforced concrete (RC) beams by using various ultrahigh performance fibre-reinforced concrete (UHPFRC) systems. The proposed 3D finite element model (FEM) was verified by comparing its results with those of experimental studies in the literature. The validated numerical model is used to analyse the crucial parameters, which are mainly related to the design of RC beams and shear-strengthened UHPFRC layers, such as the effect of shear span-to-depth ratio on the shear behaviour of the strengthened or nonstrengthened RC beams and the effect of geometry and length of UHPFRC layers. Moreover, the effect of the UHPFRC layers’ reinforcement ratio and strengthening of one longitudinal vertical face on the mechanical performance of RC beams strengthened in shear with UHPFRC layers is investigated. Results of the analysed beams show that the shear span-to-depth ratio significantly affects the shear behaviour of not only the normal-strength RC beams but also the RC beams strengthened with UHPFRC layers. However, the effect of shear span-to-depth ratio has not been considered in existing design code equations. Consequently, this study suggests two formulas to estimate the shear strength of normal-strength RC beams and UHPFRC-strengthened RC beams considering the effect of the shear span-to-depth ratio.

scholarly journals Effect of Reinforced Concrete Column Capital on Punching Shear Strength of Flat Slab

2019 ◽  
Vol 54 (5) ◽  
Author(s):  
Haider K. Ammash ◽  
Safa S. Kadhim
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Reference Model ◽  
Punching Shear ◽  
Concrete Column ◽  
Reinforced Concrete Column ◽  
Finite Element Program ◽  
Flat Slab ◽  
Size And Shape ◽  
Element Program

In the present study, the effect of using reinforced concrete column capital on the punching shear strength of flat slab was investigated. The study was divided into two lines, the first line was the experimental study involves the molding four reinforced concrete flat slab models with dimensions (1600×1600×100 mm) with three different dimensions of column capital (400×400 mm, 600×600 mm, and 800×800 mm) in addition to reference model without columns capital (column dimension 200×200 mm). The second line that numerical modeling through the ABAQUS finite element program was introduced. Effect of column’s capital size and shape of column’s capital (rectangular and circular) were studied experimentally and numerically. A good agreement was obtained between the experimental and theoretical study. The main conclusion that the punching shear strength of reinforced concrete flat slab was affected on the size and shape of a column capital.

scholarly journals Experimental verification of punching shear resistance of flat slab fragments

2021 ◽  
Vol 30 (4) ◽  
Author(s):  
Simona Šarvaicová ◽  
Viktor Borzovič
Keyword(s):  
Reinforced Concrete ◽  
Experimental Verification ◽  
Shear Resistance ◽  
Linear Analysis ◽  
Punching Shear ◽  
Test Results ◽  
Loading Test ◽  
Design Models ◽  
Flat Slab ◽  
Standard Design

The paper deals with the loading test results of an experimental reinforced concrete flat slab fragment, which was supported by an elongated rectangular column. The slab specimens were 200 mm thick and were designed without any shear reinforcement. By experimentally obtained punching shear resistance, the accuracy of the standard design models for prediction punching resistance was compared. The results of the experiments were also compared with the results of a numerical non-linear analysis performed in the Atena program.

Structural performance of steel fibre reinforced concrete — Part I. Overview of the experimental program

2014 ◽  
Vol 5 (1) ◽  
pp. 9-19
Author(s):  
I. Kovács
Keyword(s):  
Reinforced Concrete ◽  
Steel Fibre ◽  
Concrete Beams ◽  
Test Methods ◽  
Reinforced Concrete Beams ◽  
Shear Behaviour ◽  
Structural Performance ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Steel Fibre Reinforced Concrete

Abstract The papers of the series deal with experimental characterisation of mechanical as well as structural properties of different steel fibre reinforced concretes that can be used for several structural applications. An extensive experimental programme (six years) has been developed to investigate the effect of steel fibre reinforcement on the mechanical performance and structural behaviour of concrete specimens. Specimens and test methods were selected to be able to detect realistic behaviour of the material, representing clear effect on the structural performance. Material compositions, test methods, type of test specimens will be detailed in the presented paper (Part I). Furthermore, compressive strength (Part II), stress-strain relationship (Part II), splitting strength (Part III) and toughness (Part IV) will also be discussed. In the light of the motivation to determine the structural performances of 1D concrete structural element affected by steel fibre reinforcement, bending and shear behaviour (Part V) as well as serviceability state (Part VI) of steel fibre reinforced concrete beams will be analysed. Since normal force — prestressing force — can affectively be used to improve the structural performances of RC element flexural tests were carried out on prestressed pretensioned steel fibre reinforced concrete beams (Part VII). Moreover, focusing on the in-plane state of stresses for 2D structures, behaviour of steel fibre reinforced concrete deep beams in shear and steel fibre reinforced concrete slabs (Part VIII) in bending will be explained. Finally, based on the wide range of the experimental and analytical studies on the presented field, a new material model for the 1D uniaxial behaviour (Part IX) and its possible extension to the 3D case (Part X) will be described hereafter. All papers will put emphasis on the short literature review of the last four decades.

Effect of Column Dimensions on the Punching Shear of Flat Slab

2019 ◽  
pp. 378-393
Author(s):  
Hamid Abdulmahdi Faris ◽  
Lubna Mohammed Abd
Keyword(s):  
Reinforced Concrete ◽  
Shear Failure ◽  
Concrete Slab ◽  
The Other ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Reinforced Concrete Slab ◽  
Flat Slab ◽  
Interior Edge ◽  
Reinforced Concrete Slabs

The "flat slab" is a reinforced concrete slab bolstered, by a number of columns. Punching, shear is a category for collapse for reinforced concrete slabs exposed to great confined forces. In "flat slab" constructions the shear failure happens, at column bolster joints. To avoid this, collapse two methods are used, first method is increasing the column dimensions and, the other is to use drop panel if the first method leads to uneconomical, design. Two examples are used to find the effect, of column dimensions, increase on the punching shear failure of "flat slab". The first example, is a "flat slab" of span (5 by 5) m and the other is of span (6 by 6) m. The column which examined is the interior, edge and corner columns, and the interior column is the most dangerous case. It is concluded that, the increase of column dimensions are lead to avoid of punching shear failure in "flat slab" and the drop panel is enlarge the area of the critical shear perimeter and this avoiding punching shear failure.

scholarly journals Evaluation of punching shear strength of flat slabs supported on rectangular columns

2018 ◽  
Vol 33 ◽  
pp. 02007 ◽  
Author(s):  
Valery Filatov
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Concrete Slab ◽  
Structural Parameters ◽  
Experimental Studies ◽  
Punching Shear ◽  
Design Solution ◽  
Concrete Slabs ◽  
Reinforced Concrete Slabs ◽  
Rectangular Columns

The article presents the methodology and results of an analytical study of structural parameters influence on the value of punching force for the joint of columns and flat reinforced concrete slab. This design solution is typical for monolithic reinforced concrete girderless frames, which have a wide application in the construction of high-rise buildings. As the results of earlier studies show the punching shear strength of slabs at rectangular columns can be lower than at square columns with a similar length of the control perimeter. The influence of two structural parameters on the punching strength of the plate is investigated - the ratio of the side of the column cross-section to the effective depth of slab C/d and the ratio of the sides of the rectangular column Cmax/Cmin. According to the results of the study, graphs of reduction the control perimeter depending on the structural parameters are presented for columns square and rectangular cross-sections. Comparison of results obtained by proposed approach and MC2010 simplified method are shown, that proposed approach gives a more conservative estimate of the influence of the structural parameters. A significant influence of the considered structural parameters on punching shear strength of reinforced concrete slabs is confirmed by the results of experimental studies. The results of the study confirm the necessity of taking into account the considered structural parameters when calculating the punching shear strength of flat reinforced concrete slabs and further development of code design methods.

Sign in / Sign up

Export Citation Format

Share Document