3. Tough but slippery

2014 ◽  
pp. 43-65
Author(s):  
Christopher Hall
Keyword(s):  
Thermal Conductivity ◽  
Specific Heat ◽  
Thermal Behaviour ◽  
Specific Energy ◽  
Material Properties ◽  
Oil Industry ◽  
Thermal Expansivity ◽  
Industrial Processes ◽  
Low Density ◽  
Polymer Molecules

‘Tough but slippery’ considers the physical characteristics of materials. Understanding properties in certain materials allows us to predict their behaviour and to use them appropriately in industrial processes. Aerospace engineers require lightweight materials with low density, but oil industry drilling engineers use the dense mineral barytes to make heavy muds for controlling the pressures in wells. Thermal expansivity, specific heat, and thermal conductivity are properties that describe the thermal behaviour of materials. Mechanical material properties include stiffness, strength, hardness, weakness, softness, brittleness, and toughness. In metals, yield and plasticity are of the greatest significance and value. Elasticity of polymer molecules and the viscosity and specific energy of liquids and gases are also described.

Thermal Conductivity and Volumetric Specific Heat of Low-Density Wooden Mats

2016 ◽  
Vol 66 (5-6) ◽  
pp. 300-307
Author(s):  
Takashi Nakaya ◽  
Mariko Yamasaki ◽  
Satoshi Fukuta ◽  
Yasutoshi Sasaki
Keyword(s):  
Thermal Conductivity ◽  
Specific Heat ◽  
Low Density ◽  
Volumetric Specific Heat

Effects of thermal material properties on precision of transient temperatures in pulsed laser welding of Ti6Al4V alloy

2018 ◽  
Vol 233 (9) ◽  
pp. 3170-3181
Author(s):  
Massab Junaid ◽  
Taqi Ahmad Cheema ◽  
Hani Haleem ◽  
Saad-ul-Fatah ◽  
Khalid Rahman ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Specific Heat ◽  
Temperature Profile ◽  
Material Properties ◽  
Pulsed Laser ◽  
Ti6al4v Alloy ◽  
Transient Temperature ◽  
Constant Density ◽  
Temperature Dependent ◽  
Temperature Distributions

This study investigates the effect of temperature-dependent material properties on the precision of a simulation in pulsed laser beam welding of Ti6Al4V alloy. Ti6Al4V is one of the most extensively used titanium alloys. The precision in transient temperature distributions developed in the thermal modeling part of a sequentially coupled thermo-mechanical simulation is crucial to the end results of structural mechanics. The temperature profile obtained by a finite element model at two distinct locations is validated by experimental results using temperature-dependent material properties. Then, the effect of assuming constant room temperature values for thermal conductivity, specific heat, and density on the temperature distribution is studied at different welding speeds. Temperature distributions are unaffected by the constant density assumption. The constant thermal conductivity assumption underestimates the peak temperatures far from the weld region, whereas the constant specific heat assumption overestimates these temperatures. This effect becomes prominent at low welding speeds. The temperature profile when conductivity and specific heat are assumed to be constant is nearly similar to that in the case of constant conductivity when conductivity and specific heat are assumed constant. Therefore, conductivity is the dominant variable. The constant conductivity assumption also restricts the heat flow from the weld to the edge region, thus increasing the size of the weld pool. This effect also becomes increasingly prominent at low welding speeds.

Thermophysical Properties of Baled Switchgrass

2021 ◽  
Vol 37 (6) ◽  
pp. 1107-1114
Author(s):  
Drew F Schiavone ◽  
Michael D Montross
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Multiple Regression ◽  
Thermophysical Properties ◽  
Material Properties ◽  
Thermal Probe ◽  
Transfer Rates ◽  
Thermophysical Parameters

HighlightsThermal conductivity and thermal diffusivity of baled switchgrass were measured with a dual thermal probe.Specific heat of baled switchgrass was estimated based on other thermophysical parameters.Thermophysical parameters were modeled as functions of the material properties using multiple regression.Anisotropism was observed with different heat transfer rates occurring in each directional orientation.Abstract.Although the thermophysical properties of baled biomass play a critical role in developing postharvest quality models, these parameters have not been investigated for many bulk agricultural feedstocks including switchgrass. In this study, a dual thermal probe, consisting of a thermal conductivity probe and separate thermal diffusivity probe, was used to determine the thermal conductivity, thermal diffusivity, and specific heat of lab-scale rectangular bales of switchgrass (~10.16 × 10.16 × 30.48 cm). Thermal conductivity, thermal diffusivity, and specific heat ranged from 1.04E-2 to 6.10E-2 W m-1 °C-1, 0.863E-7 to 2.284E-7 m2 s-1, and 0.40 to 2.51 kJ kg-1 °C-1, respectively, depending on temperature (20.3°C, 30.2°C, and 40.1°C), moisture content (11.4%, 20.8%, 29.0%, and 42.3% on a wet basis), bulk density (157.2, 172.4, 197.2, and 230.1 kg m-3) and directional orientation (lateral or transverse). The results of this study promote a practical understanding of heat transfer within baled switchgrass while defining the dynamic relationship to material properties through multiple regression analysis. Anisotropism between the lateral and transverse bale orientations was observed with different heat transfer rates observed in both directional orientations. This anisotropism was attributed to the unique physical composition of the bulk material in the axial direction of bale compression (i.e., variation in porosity, discontinuous porous cavities, and material heterogeneity) compared to the composition of continuous stem material forming a layered flake of the rectangular bale. Keywords: Biomass, Bioprocessing, High solids, Thermal conductivity, Thermal diffusivity.

Thermal Characterization of Carbon-Carbon Composites

2011 ◽  
Author(s):  
Messiha Saad ◽  
Darryl Baker ◽  
Rhys Reaves
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Critical Role ◽  
Carbon Composite ◽  
Flash Method ◽  
Carbon Composites ◽  
Energy Storage Devices ◽  
Graphitized Carbon

Thermal properties of materials such as specific heat, thermal diffusivity, and thermal conductivity are very important in the engineering design process and analysis of aerospace vehicles as well as space systems. These properties are also important in power generation, transportation, and energy storage devices including fuel cells and solar cells. Thermal conductivity plays a critical role in the performance of materials in high temperature applications. Thermal conductivity is the property that determines the working temperature levels of the material, and it is an important parameter in problems involving heat transfer and thermal structures. The objective of this research is to develop thermal properties data base for carbon-carbon and graphitized carbon-carbon composite materials. The carbon-carbon composites tested were produced by the Resin Transfer Molding (RTM) process using T300 2-D carbon fabric and Primaset PT-30 cyanate ester. The graphitized carbon-carbon composite was heat treated to 2500°C. The flash method was used to measure the thermal diffusivity of the materials; this method is based on America Society for Testing and Materials, ASTM E1461 standard. In addition, the differential scanning calorimeter was used in accordance with the ASTM E1269 standard to determine the specific heat. The thermal conductivity was determined using the measured values of their thermal diffusivity, specific heat, and the density of the materials.

scholarly journals Influence of alkaline modification on selected properties of banana fiber paperbricks

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Abayomi A. Akinwande ◽  
Adeolu A. Adediran ◽  
Oluwatosin A. Balogun ◽  
Oluwaseyi S. Olusoju ◽  
Olanrewaju S. Adesina
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Moisture Absorption ◽  
Water Volume ◽  
Banana Fiber ◽  
Fiber Loading ◽  
Banana Fibers ◽  
Alkaline Modification

AbstractIn a bid to develop paper bricks as alternative masonry units, unmodified banana fibers (UMBF) and alkaline (1 Molar aqueous sodium hydroxide) modified banana fibers (AMBF), fine sand, and ordinary Portland cement were blended with waste paper pulp. The fibers were introduced in varying proportions of 0, 0.5, 1.0 1.5, 2.0, and 2.5 wt% (by weight of the pulp) and curing was done for 28 and 56 days. Properties such as water and moisture absorption, compressive, flexural, and splitting tensile strengths, thermal conductivity, and specific heat capacity were appraised. The outcome of the examinations carried out revealed that water absorption rose with fiber loading while AMBF reinforced samples absorbed lesser water volume than UMBF reinforced samples; a feat occasioned by alkaline treatment of banana fiber. Moisture absorption increased with paper bricks doped with UMBF, while in the case of AMBF-paper bricks, property value was noted to depreciate with increment in AMBF proportion. Fiber loading resulted in improvement of compressive, flexural, and splitting tensile strengths and it was noted that AMBF reinforced samples performed better. The result of the thermal test showed that incorporation of UMBF led to depreciation in thermal conductivity while AMBF infusion in the bricks initiated increment in value. Opposite behaviour was observed for specific heat capacity as UMBF enhanced heat capacity while AMBF led to depreciation. Experimental trend analysis carried out indicates that curing length and alkaline modification of fiber were effective in maximizing the properties of paperbricks for masonry construction.

scholarly journals Thermophysical Properties of Multifunctional Syntactic Foams Containing Phase Change Microcapsules for Thermal Energy Storage

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1790
Author(s):  
Francesco Galvagnini ◽  
Andrea Dorigato ◽  
Luca Fambri ◽  
Giulia Fredi ◽  
Alessandro Pegoretti
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Epoxy Resin ◽  
Storage Modulus ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Neat Epoxy ◽  
Low Density ◽  
Syntactic Foams

Syntactic foams (SFs) combining an epoxy resin and hollow glass microspheres (HGM) feature a unique combination of low density, high mechanical properties, and low thermal conductivity which can be tuned according to specific applications. In this work, the versatility of epoxy/HGM SFs was further expanded by adding a microencapsulated phase change material (PCM) providing thermal energy storage (TES) ability at a phase change temperature of 43 °C. At this aim, fifteen epoxy (HGM/PCM) compositions with a total filler content (HGM + PCM) of up to 40 vol% were prepared and characterized. The experimental results were fitted with statistical models, which resulted in ternary diagrams that visually represented the properties of the ternary systems and simplified trend identification. Dynamic rheological tests showed that the PCM increased the viscosity of the epoxy resin more than HGM due to the smaller average size (20 µm vs. 60 µm) and that the systems containing both HGM and PCM showed lower viscosity than those containing only one filler type, due to the higher packing efficiency of bimodal filler distributions. HGM strongly reduced the gravimetric density and the thermal insulation properties. In fact, the sample with 40 vol% of HGM showed a density of 0.735 g/cm3 (−35% than neat epoxy) and a thermal conductivity of 0.12 W/(m∙K) (−40% than neat epoxy). Moreover, the increase in the PCM content increased the specific phase change enthalpy, which was up to 68 J/g for the sample with 40 vol% of PCM, with a consequent improvement in the thermal management ability that was also evidenced by temperature profiling tests in transient heating and cooling regimes. Finally, dynamical mechanical thermal analysis (DMTA) showed that both fillers decreased the storage modulus but generally increased the storage modulus normalized by density (E′/ρ) up to 2440 MPa/(g/cm3) at 25 °C with 40 vol% of HGM (+48% than neat epoxy). These results confirmed that the main asset of these ternary multifunctional syntactic foams is their versatility, as the composition can be tuned to reach the property set that best matches the application requirements in terms of TES ability, thermal insulation, and low density.

scholarly journals Thermophysical Properties of Cement Mortar Containing Waste Glass Powder

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 488
Author(s):  
Oumaima Nasry ◽  
Abderrahim Samaouali ◽  
Sara Belarouf ◽  
Abdelkrim Moufakkir ◽  
Hanane Sghiouri El Idrissi ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Specific Heat ◽  
Thermophysical Properties ◽  
Glass Powder ◽  
Cement Mortar ◽  
Soda Lime ◽  
Waste Glass ◽  
Soda Lime Glass ◽  
Volumetric Specific Heat ◽  
Waste Glass Powder

This study aims to provide a thermophysical characterization of a new economical and green mortar. This material is characterized by partially replacing the cement with recycled soda lime glass. The cement was partially substituted (10, 20, 30, 40, 50 and 60% in weight) by glass powder with a water/cement ratio of 0.4. The glass powder and four of the seven samples were analyzed using a scanning electron microscope (SEM). The thermophysical properties, such as thermal conductivity and volumetric specific heat, were experimentally measured in both dry and wet (water saturated) states. These properties were determined as a function of the glass powder percentage by using a CT-Meter at different temperatures (20 °C, 30 °C, 40 °C and 50 °C) in a temperature-controlled box. The results show that the thermophysical parameters decreased linearly when 60% glass powder was added to cement mortar: 37% for thermal conductivity, 18% for volumetric specific heat and 22% for thermal diffusivity. The density of the mortar also decreased by about 11% in dry state and 5% in wet state. The use of waste glass powder as a cement replacement affects the thermophysical properties of cement mortar due to its porosity as compared with the control mortar. The results indicate that thermal conductivity and volumetric specific heat increases with temperature increase and/or the substitution rate decrease. Therefore, the addition of waste glass powder can significantly affect the thermophysical properties of ordinary cement mortar.

Sign in / Sign up

Export Citation Format

Share Document