Novel HILIC-ESI-MS method for urinary profiling of MSUD and methylmalonic aciduria biomarkers

2019 ◽  
Vol 57 (8) ◽  
pp. 715-723
Author(s):  
Elizabeth Mary Mathew ◽  
Leslie Lewis ◽  
Pragna Rao ◽  
K Nalini ◽  
Asha Kamath ◽  
...  
Keyword(s):  
Formic Acid ◽  
Malonic Acid ◽  
Limit Of Detection ◽  
Cost Effective ◽  
Methylmalonic Aciduria ◽  
Limit Of Quantification ◽  
Maple Syrup ◽  
Effective Manner ◽  
Branched Chain ◽  
Development And Validation

AbstractMethyl malonic acid and branched-chain keto acids are important biomarkers for the diagnosis of cobalamin deficiencies and maple syrup urine disease. We report the development and validation of a HILIC-ESI-MS2 method for the quantification of these organic acids from neonatal urine. The samples were 100 times diluted and analyzed on a ZIC-HILIC column with 25-mM formic acid in water: 25-mM formic acid in acetonitrile (45:55) at a flow rate of 0.8 mL/min with a runtime of only 6 minutes. The method demonstrated a lower limit of detection of 10 ng/mL, Limit of Quantification (LOQ) of 50 ng/mL, linearity of r2 ≥ 0.990 and recoveries of 87–105% for all analytes. The intraday and interday precision CV’s were <10% and 12%, respectively. Extensive stability studies demonstrated the analytes to be stable in stock and in matrix with a percent change within ±15%. The Bland–Altman analysis of the developed method with the gold standard GCMS method demonstrated a bias of 0.44, 0.11, 0.009 and –0.19 for methyl malonic acid, 3-methyl-2-oxovaleric acid, 2-hydroxy-3methylbutyric acid and 4-methyl-2-oxovaleric acid, respectively, proving the methods are comparable. The newly developed method involves no derivatization and has a simple sample preparation and a low runtime, enabling it to be easily automated with a high sample throughput in a cost-effective manner.

scholarly journals A REVIEW ON ANALYTICAL METHOD DEVELOPMENT AND VALIDATION

2018 ◽  
Vol 10 (6) ◽  
pp. 8 ◽  
Author(s):  
Shivani Sharma ◽  
Swapnil Goyal ◽  
Kalindi Chauhan
Keyword(s):  
Method Development ◽  
Limit Of Detection ◽  
Cost Effective ◽  
Good Manufacturing Practice ◽  
Raw Material ◽  
Analytical Technique ◽  
Effective Manner ◽  
Validation Parameters ◽  
Limit Of Quantitation ◽  
Development And Validation

The top objective of any pharmaceutical industry is to produce products of necessary characteristic and quality reliably, in a cost-effective manner. Development of a method is essential for discovery, development, and evaluation of medicines in the pharmaceutical formulation. The main aim of this review article was to check the development and validation of the procedure employed for the medication from the starting of the formulation to the complete commercial batch of product. At the point when an analytical technique is applied to produce outcomes for the quality of medicine associated samples, it is necessary that the outcomes are reliable. In the pharma industry, validation policy is documented for how to perform validation, types of validation and validation policy are complied with the necessities of good manufacturing practice (GMP) regulations. Validation is very important for the effective running of the pharmaceutical firms. At every stage from raw material to the finished, stability, everywhere validation was performed. The method was developed properly, and validation parameters are explained in terms of accuracy, specificity, precision, limit of detection (LOD), limit of quantitation (LOQ), ruggedness, robustness, and system suitability testing with the example of certain drugs. All validation parameters are used in the routine and stability analysis.

scholarly journals A novel LC-MS method development and validation for the determination of phenyl vinyl sulfone in eletriptan hydrobromide

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Indhu Priya Mabbu ◽  
G. Sumathi ◽  
N. Devanna
Keyword(s):  
Method Development ◽  
Limit Of Detection ◽  
Vinyl Sulfone ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Pressure Chemical Ionization ◽  
Pressure Chemical ◽  
Development And Validation ◽  
Phenyl Vinyl

Abstract Background The aim of the present method is to develop and validate a specific, sensitive, precise, and accurate liquid chromatography-mass spectrometry (LC-MS) method for the estimation of the phenyl vinyl sulfone in the eletriptan hydrobromide. The effective separation of the phenyl vinyl sulfone was achieved by the Symmetry C18 (50 × 4.6 mm, 3.5 μm) column and a mobile phase composition of 0.1%v/v ammonia buffer to methanol (5:95 v/v), using 0.45 ml/min flow rate and 20 μl of injection volume, with methanol used as diluent. The phenyl vinyl sulfone was monitored on atomic pressure chemical ionization mode mass spectrometer with positive polarity mode. Results The retention time of phenyl vinyl sulfone was found at 2.13 min. The limit of detection (LOD) and limit of quantification (LOQ) were observed at 1.43 ppm and 4.77 ppm concentration respectively; the linear range was found in the concentration ranges from 4.77 to 27.00 ppm with regression coefficient of 0.9990 and accuracy in the range of 97.50–102.10%. The percentage relative standard deviation (% RSD) for six replicates said to be injections were less than 10%. Conclusion The proposed method was validated successfully as per ICH guidelines. Hence, this is employed for the determination of phenyl vinyl sulfone in the eletriptan hydrobromide.

scholarly journals Development and Validation of a Rapid RP-HPLC Method for the Estimation of Esmolol Hydrochloride in Bulk and Pharmaceutical Dosage Forms

2010 ◽  
Vol 7 (3) ◽  
pp. 807-812 ◽  
Author(s):  
Vanita Somasekhar ◽  
D. Gowri Sankar
Keyword(s):  
Limit Of Detection ◽  
Hplc Method ◽  
Detector Response ◽  
Reverse Phase Hplc ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc ◽  
Accuracy And Precision ◽  
Development And Validation

A reverse phase HPLC method is described for the determination of esmolol hydrochloride in bulk and injections. Chromatography was carried on a C18column using a mixture of acetonitrile, 0.05 M sodium acetate buffer and glacial acetic acid (35:65:3 v/v/v) as the mobile phase at a flow rate of 1 mL/min with detection at 275 nm. The retention time of the drug was 4.76 min. The detector response was linear in the concentration of 1-50 μg/mL. The limit of detection and limit of quantification was 0.614 and 1.86 μg/mL respectively. The method was validated by determining its sensitivity, linearity, accuracy and precision. The proposed method is simple, economical, fast, accurate and precise and hence can be applied for routine quality control of esmolol hydrochloride in bulk and injections.

Method Development and Validation of Spectrophotometric Methods for The Estimation of Rizatriptan Benzoate in Pure and Pharmaceutical Dosage Form

2021 ◽  
pp. 6003-6006
Author(s):  
Pushpa Latha E. ◽  
Sailaja B.
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Limit Of Detection ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Form ◽  
Rizatriptan Benzoate ◽  
Spectrophotometric Methods ◽  
Ich Guidelines ◽  
Development And Validation ◽  
Tablet Dosage

Analytical UV derivative spectrophotometric method was developed and validated to quantify Rizatriptan Benzoate in pure drug and tablet dosage form. Based on the spectrophotometric characteristics of Rizatriptan Benzoate, a signal of zero (225nm), first (216nm), second (237nm), third (233nm), fourth (231nm) order derivative spectra were found to be adequate for quantification. The methods obeyed Beer's law in the concentration range of (0.1-360µg/ml) with square correlation coefficient (r2) of 0.999. The mean percentage recovery was found to be 100.01 ± 0.075. As per ICH guidelines the results of the analysis were validated in terms of linearity, precision, accuracy, limit of detection and limit of quantification, and were found to be satisfactory.

Development and Validation of the Analytical method for the estimation of a combination of 5-fluorouracil and Imiquimod by RP-HPLC

2021 ◽  
pp. 3313-3318
Author(s):  
Bhupender Tomar ◽  
Ankita Sharma ◽  
Inder Kumar ◽  
Sandeep Jain ◽  
Pallavi Ahirrao
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
High Performance Liquid Chromatographic ◽  
Simultaneous Estimation ◽  
Limit Of Quantification ◽  
Pharmaceutical Ingredients ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Development And Validation ◽  
Liquid Chromatographic

A simple, precise, and accurate reverse phase high performance liquid chromatographic method (RP-HPLC) was developed and validated for the estimation of the combination of 5- Fluorouracil (5-FU) and Imiquimod in active pharmaceutical ingredients (APIs). The method was carried out on Phenomenex C18 (250 × 4.6mm I.D., 5𝜇m) using isocratic elution mode. The mobile phase was used as Acetonitrile: 10mM potassium dihydrogen orthophosphate: triethylamine (40:59.9:0.1, v/v, pH 4.5 with orthophosphoric acid) and Water: ACN (50:50 v/v) was used as a diluent. The concentration of solvents was 1-20µg/ml and the volume of injection was 20µl with the flow rate of 1.2ml/min. The retention times for 5-FU and Imiquimod were found to be 1.9±0.5 and 6.6±0.5 min respectively. The absorption maxima of 5FU and Imiquimod were found 267nm and 227nm respectively. The method was validated as per ICH guidelines. All the data were found within the specified limits. The limit of detection (LOD) and limit of quantification (LOQ) of 5- Fluorouracil were found to be 0.015μg/mL and 0.048 μg/mL, respectively, and Imiquimod was found to be 0.078μg/mL and 0.237μg/mL, respectively. The method developed in the present study was found to be sensitive, specific, and precise and can be applied for the simultaneous estimation of 5-FU and Imiquimod.

High performance liquid chromatography (HPLC) method development and validation for the determination of flunixin: Animal plasma based study

2021 ◽  
pp. 1-11
Author(s):  
Sultan M. Alshahrani ◽  
John Mark Christensen
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Method Development ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Limit Of Quantification ◽  
Mobile Phases ◽  
Hplc Method Development ◽  
Development And Validation

This study was designed to develop and validate a simple and efficient high performance liquid chromatography (HPLC) method to determine flunixin concentrations in Asian elephant’s (Elephas maximus) plasma. Flunixin was administered orally at a dose of 0.8 mg/kg, and blood samples were collected. Flunixin extraction was performed by adding an equal amount of acetonitrile to plasma and centrifuging at 4500 rpm for 25 minutes. The supernatant was removed, and flunixin was analyzed using HPLC-UV detection. Two methods were developed and tested utilizing two different mobile phases either with or without adding methanol (ACN: H2O vs. ACN: H2O: MeOH). Both methods showed excellent linearity and reproducibility. The limit of detection was 0.05 ug/ml and limit of quantification was 0.1 ug/ml. the efficiency of flunixin recovery was maximized by the addition of methanol to mobile phase (ACN: H2O: MeOH as 50:30:20) at 95% in comparison to 23% without methanol. In conclusion, adding methanol to HPLC methods for extraction of flunixin from elephants’ plasma yielded higher recovery rate than without methanol.

scholarly journals DEVELOPMENT AND VALIDATION OF UV-SPECTROPHOTOMETRIC METHOD FOR ESTIMATION OF HYDROQUINONE IN BULK, MARKETED CREAM AND PREAPARED NLC FORMULATION

2017 ◽  
Vol 9 (5) ◽  
pp. 102
Author(s):  
Sukhjinder Kaur ◽  
Taranjit Kaur ◽  
Gurdeep Kaur ◽  
Shivani Verma
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Pure Form ◽  
Nanostructured Lipid Carrier ◽  
Limit Of Quantification ◽  
Double Beam ◽  
Uv Visible ◽  
Development And Validation

Objective: The aim of the present work was to develop a simple, rapid, accurate and economical UV-visible spectrophotometric method for the determination of hydroquinone (HQ) in its pure form, marketed formulation as well as in the prepared nanostructured lipid carrier (NLC) systems and to validate the developed method.Methods: HQ was estimated at UV maxima of 289.6 nm in pH 5.5 phosphate buffer using UV-Visible double beam spectrophotometer. Following the guidelines of the International Conference on Harmonization (ICH), the method was validated for various analytical parameters like linearity, precision, and accuracy robustness, ruggedness, limit of detection, quantification limit, and formulation analysis.Results: The obtained results of the analysis were validated statistically. Recovery studies were performed to confirm the accuracy of the proposed method. In the developed method, linearity over the concentration range of 5-40 μg/ml of HQ was observed with the correlation coefficient of 0.998 and found in good agreement with Beer Lambert’s law. The precision (intra-day and inter-day) of the method was found within official RCD limits (RSD<2%).Conclusion: The sensitivity of the method was assessed by determining the limit of detection and limit of quantification. It could be concluded from the results obtained that the purposed method for estimation of HQ in pure form, in the marketed ointment and in the prepared NLC-formulation was simple, rapid, accurate, precise and economical. It can be used successfully in the quality control of pharmaceutical formulations and for the routine laboratory analysis.

scholarly journals UPLC Method Development and Validation for the Determination of Chlophedianol Hydrochloride in Syrup Dosage Form

2017 ◽  
Vol 2 (02) ◽  
pp. 25-31
Author(s):  
Anas Rasheed ◽  
Osman Ahmed
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Limit Of Detection ◽  
Linear Regression Analysis ◽  
Analysis Data ◽  
Calibration Plot ◽  
Limit Of Quantification ◽  
Ich Guidelines ◽  
Bulk Drug ◽  
Development And Validation

A specific, precise, accurate ultra pressure liquid chromatography (UPLC) method is developed for estimation of chlophedianol hydrochloride in bulk drug and syrup dosage form. The method employed with Hypersil BDS C18 (100 mm x 2.1 mm, 1.7 μm) in a gradient mode, with mobile phase of methanol and acetonitrile in the ratio of 65:35 %v/v. The flow rate was 0.1 ml/min and effluent was monitored at 254 nm. Retention time was found to be 1.130±0.005 min. The method was validated in terms of linearity, accuracy, precision, limit of detection (LOD), limit of quantification (LOQ)in accordance with ICH guidelines. Linear regression analysis data for the calibration plot showed that there was good linear relationship between response and concentration in the range of 20-100 μg/ml respectively. The LOD and LOQ values were found to be 2.094(μg/ml)and 6.3466(μg/ml)respectively. No chromatographic interference from syrup excipients and degradants were found. The proposed method was successfully used for estimation of chlophedianol hydrochloride in syrup dosage form.

scholarly journals DEVELOPMENT AND VALIDATION OF A SPECTROPHOTOMETRIC METHOD TO EVALUATE BIOSAFETY CAPACITY OF BARU (Dipteryx alata) PEELS

2018 ◽  
Vol 15 (30) ◽  
pp. 221-240
Author(s):  
E. C. CESARINO ◽  
D. S. MULHOLLAND ◽  
W. FRANCISCO
Keyword(s):  
Contact Time ◽  
Limit Of Detection ◽  
Copper Ions ◽  
Maximum Adsorption Capacity ◽  
Limit Of Quantification ◽  
Experimental Conditions ◽  
Inorganic Matter ◽  
Pseudo Second Order ◽  
Development And Validation ◽  
Dipteryx Alata

This study developed a new analytical method using Molecular Absorption Spectroscopy (MAS) to track the ion cover in adsorption solution per peel (mesocarp) of Baru (Dipteryx alata). The adsorption study was conducted at different pH and contact time (kinetic), encountering 4.0 as the best pH for adsorption experimental conditions. The variation of contact time showed a pseudo-second-order adsorption kinetic behavior. The interpretation of the isotherms allowed to approach the Langmuir model with R² of 0.918 and to determine the maximum adsorption capacity (qmáx) as 11.481 mg.g⁻¹. The characterization of biomass by MAS in the Infrared (FT-IR) identified the possible functional groups belonging to protein, fatty acids and lipids, while thermal analysis (TG-DSC) showed a greater removal of inorganic matter by the biomass washed with water. The method underwent analytical validation, being classified as specific, sensitive, linear, robust, precise and accurate, with LD (limit of detection) and LQ (limit of quantification) equal to 3.873 and 12.912 mg.L⁻¹, respectively. The results obtained demonstrated the potential use of mesocarp Baru as a natural adsorbent for copper ions in solution, opening power for future expansion and improvement of the method.

METHOD DEVELOPMENT AND VALIDATION FOR THE SIMULTANEOUS ESTIMATION OF THYMOL AND EUGENOL BY USING RP-HPLC IN PURE AND IN EMULGEL FORMULATION

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (07) ◽  
pp. 59-65
Author(s):  
Vinita C. Patole ◽  
Shilpa P. Chaudhari ◽  
Keyword(s):  
High Performance ◽  
Method Development ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Peak Areas ◽  
80 A 20 ◽  
Development And Validation

An attempt was made to develop a simple, selective, rapid and precise high-performance liquid chromatography (HPLC) method for simultaneous estimation of thymol and eugenol. Analysis was performed on a C18 column with the mobile phase consisting of solvent %A (water) and solvent %B (acetonitrile) with the following gradient: 0–1 min, 80 % A, 20 % B; 1–7 min, 40 % A and 60 % B; 7–12 min, 10 % A and 90 % B; and 12–15min, 80 % A and 20 % B at a flow rate of 0.6 mL/min. The compounds were well separated on a Thermo Scientific Hypersil BDS RP C18 column (4.6 mm × 150 mm, dp = 5 µm) and ultraviolet detection at 280 nm. The retention times of eugenol and thymol were 10.5 min and 11.6 min, respectively. Validation of the proposed method was carried out according to the guidelines of the International Council on Harmonization (ICH). The linearity of the method is good for thymol and eugenol over the concentration range of 1–50 ppm, and the r 2 values were 0.9996 for both thymol and eugenol. The calculated limit of detection (LOD) value was 0.5ppm and the limit of quantification (LOQ) value was 1ppm for both the analytes. The intra and interday relative standard deviation (RSD) of the retention time and peak areas was less than 3 %.The established method was appropriate, and the two markers were well resolved, enabling efficient quantitative analysis of thymol and eugenol.

Sign in / Sign up

Export Citation Format

Share Document