scholarly journals Pest Management Knowledge and Practices of Mango Farmers in Southeastern Ghana

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Clement Akotsen-Mensah ◽  
Isaac N. Ativor ◽  
Roger S. Anderson ◽  
Kwame Afreh-Nuamah ◽  
Collison F. Brentu ◽  
...  

Abstract Mango farmers in Ghana are confronted with many pest problems like fruit flies, Sternochetus mangiferae (F.), and mealy bugs. Different pest management options are available to mango farmers; however, the extent to which they apply the available pest management options is not well known. A survey was conducted among 60 farmers in southeastern Ghana, from October–December 2015 mango season, to find out the level of knowledge and practice of insect pest management used by mango farmers. The results showed that most farmers use conventional insecticides to control insect pests in mango. Majority of the farmers (30%) use a composite insecticide (Cydim super; 36 g cypermethrin + 400 g dimethoate per liter), whereas 3.3% use Pyrinex (chlorpyrifos 480 g/liter). Majority of insecticides used belong to WHO category II. Ninety percent (90%) of the farmers use cultural practices and pheromone traps. Pheromone traps are, however, used for fruit flies but not for S. mangiferae. Over 80% of the respondents who used pesticides to control pests have also adopted GLOBALGAP standards for certification. The results are discussed based on the importance of adoption of IPM strategies in mango production and the possible reduction of fruit rejection during mango export in Ghana.

Author(s):  
T.A. Jackson ◽  
A.J. Popay ◽  
S.L. Goldson

Pasture damage from insect pests is an increasing concern with rising forage value and biosecurity breaches. At the same time options for traditional chemical control of pests are becoming limited. Biological control of insect pests is important in limiting pest damage, with toxin-producing endophytes, parasitoids and insect diseases the key components limiting insect pest populations and damage in pastures. We are proposing a bioprotection strategy for pasture pest management that maximises the benefit of biocontrol and changes the emphasis from curative to preventative action in the protection of pastures from damaging pests. Keywords: bioprotection, biological control, insect pests, pest management


2019 ◽  
Vol 110 (1) ◽  
pp. 1-14 ◽  
Author(s):  
M.S. Noman ◽  
L. Liu ◽  
Z. Bai ◽  
Z. Li

AbstractTephritidae is a large family that includes several fruit and vegetable pests. These organisms usually harbor a variegated bacterial community in their digestive systems. Symbiotic associations of bacteria and fruit flies have been well-studied in the generaAnastrepha, Bactrocera, Ceratitis,andRhagoletis.Molecular and culture-based techniques indicate that many genera of the Enterobacteriaceae family, especially the genera ofKlebsiella, Enterobacter, Pectobacterium, Citrobacter, Erwinia,andProvidenciaconstitute the most prevalent populations in the gut of fruit flies. The function of symbiotic bacteria provides a promising strategy for the biological control of insect pests. Gut bacteria can be used for controlling fruit fly through many ways, including attracting as odors, enhancing the success of sterile insect technique, declining the pesticide resistance, mass rearing of parasitoids and so on. New technology and recent research improved our knowledge of the gut bacteria diversity and function, which increased their potential for pest management. In this review, we discussed the diversity of bacteria in the economically important fruit fly and the use of these bacteria for controlling fruit fly populations. All the information is important for strengthening the future research of new strategies developed for insect pest control by the understanding of symbiotic relationships and multitrophic interactions between host plant and insects.


2020 ◽  
Vol 31 (1) ◽  
pp. 24-35 ◽  
Author(s):  
Somiahnadar Rajendran

Insects are a common problem in stored produce. The author describes the extent of the problem and approaches to countering it. Stored products of agricultural and animal origin, whether edible or non-edible, are favourite food for insect pests. Durable agricultural produce comprising dry raw and processed commodities and perishables (fresh produce) are vulnerable to insect pests at various stages from production till end-use. Similarly, different animal products and museum objects are infested mainly by dermestids. Insect pests proliferate due to favourable storage conditions, temperature and humidity and availability of food in abundance. In addition to their presence in food commodities, insects occur in storages (warehouses, silos) and processing facilities (flour mills, feed mills). Insect infestation is also a serious issue in processed products and packed commodities. The extent of loss in stored products due to insects varies between countries depending on favourable climatic conditions, and pest control measures adopted. In stored food commodities, insect infestation causes loss in quantity, changes in nutritional quality, altered chemical composition, off-odours, changes in end-use products, dissemination of toxigenic microorganisms and associated health implications. The insects contribute to contaminants such as silk threads, body fragments, hastisetae, excreta and chemical secretions. Insect activity in stored products increases the moisture content favouring the growth of moulds that produce mycotoxins (e.g., aflatoxin in stored peanuts). Hide beetle, Dermestes maculatus infesting silkworm cocoons has been reported to act as a carrier of microsporidian parasite Nosema bombycis that causes pebrine disease in silkworms. In dried fish, insect infestation leads to higher bacterial count and uric acid levels. Insects cause damage in hides and skins affecting their subsequent use for making leather products. The trend in stored product insect pest management is skewing in favour of pest prevention, monitoring, housekeeping and finally control. Hermetic storage system can be supplemented with CO2 or phosphine application to achieve quicker results. Pest detection and monitoring has gained significance as an important tool in insect pest management. Pheromone traps originally intended for detection of infestations have been advanced as a mating disruption device ensuing pest suppression in storage premises and processing facilities; pheromones also have to undergo registration protocols similar to conventional insecticides in some countries. Control measures involve reduced chemical pesticide use and more non-chemical inputs such as heat, cold/freezing and desiccants. Furthermore, there is an expanding organic market where physical and biological agents play a key role. The management options for insect control depend on the necessity or severity of pest incidence. Generally, nonchemical treatments, except heat, require more treatment time or investment in expensive equipment or fail to achieve 100% insect mortality. Despite insect resistance, environmental issues and residue problems, chemical control is inevitable and continues to be the most effective and rapid control method. There are limited options with respect to alternative fumigants and the alternatives have constraints as regards environmental and health concerns, cost, and other logistics. For fumigation of fresh agricultural produce, new formulations of ethyl formate and phosphine are commercially applied replacing methyl bromide. Resistance management is now another component of stored product pest management. In recent times, fumigation techniques have improved taking into consideration possible insect resistance. Insect control deploying nanoparticles, alone or as carriers for other control agents, is an emerging area with promising results. As there is no single compound with all the desired qualities, a necessity has arisen to adopt multiple approaches. Cocktail applications or combination treatments (IGRs plus organophosphorus insecticides, diatomaceous earth plus contact insecticides, nanoparticles plus insecticides/pathogens/phytocompounds and conventional fumigants plus CO2; vacuum plus fumigant) have been proved to be more effective. The future of store product insect pest management is deployment of multiple approaches and/or combination treatments to achieve the goal quickly and effectively.


Insects ◽  
2018 ◽  
Vol 9 (4) ◽  
pp. 128 ◽  
Author(s):  
Shovon Chandra Sarkar ◽  
Endong Wang ◽  
Shengyong Wu ◽  
Zhongren Lei

Companion planting is a well-known strategy to manage insect pests and support a natural enemy population through vegetative diversification. Trap cropping is one such type of special companion planting strategy that is traditionally used for insect pest management through vegetative diversification used to attract insect pests away from the main crops during a critical time period by providing them an alternative preferred choice. Trap crops not only attract the insects for feeding and oviposition, but also act as a sink for any pathogen that may be a vector. Considerable research has been conducted on different trap crops as companion plant species to develop improved pest management strategies. Despite this, little consensus exists regarding optimal trap cropping systems for diverse pest management situations. An advantage of trap cropping over an artificially released natural enemy-based biological control could be an attractive remedy for natural enemies in cropping systems. Besides, many trap crop species can conserve natural enemies. This secondary effect of attracting natural enemies may be an advantage compared to the conventional means of pest control. However, this additional consideration requires a more knowledge-intensive background to designing an effective trap cropping system. We have provided information based on different trap crops as companion plant, their functions and an updated list of trap cropping applications to attract insect pests and natural enemies that should be proven as helpful in future trap cropping endeavors.


2021 ◽  
Vol 25 (1) ◽  
pp. 1-22
Author(s):  
MP Ali ◽  
B Nessa ◽  
MT Khatun ◽  
MU Salam ◽  
MS Kabir

The damage caused by insect pest is the continual factor for the reduction of rice production. To date, 232 rice insect pest species are identified in Bangladesh and more than 100 species of insects are considered pests in rice production systems globally, but only about 20 - 33 species can cause significant economic loss. The major goal of this study is to explore all the possible ways of developed and proposed technologies for rice insect pests management and minimize economic losses. Insect pests cause 20% average yield loss in Asia where more than 90% of the world's rice is produced. In Bangladesh, outbreak of several insects such as rice hispa, leafroller, gallmidge, stem borers and brown planthopper (BPH) occurs as severe forms. Based on previous reports, yield loss can reach upto 62% in an outbreak situation due to hispa infestation. However, BPH can cause 44% yield loss in severe infestested field. To overcome the outbreaks in odd years and to keep the loss upto 5%, it is necessary to take some preventive measures such as planting of resistant or tolerant variety, stop insecticide spraying at early establishment of rice, establish early warning and forecasting system, avoid cultivation of susceptible variety and following crop rotation. Subsequent quick management options such as insecticidal treatment for specific insect pest should also be broadcasted through variety of information systems. Advanced genomic tool can be used to develop genetically modified insect and plants for sustainable pest management. In addition, to stipulate farmers not use insecticides at early crop stgae and minimize general annualized loss, some interventions including training rice farmers, regular field monitoring, digitalization in correct insect pests identification and their management (example; BRRI rice doctor mobile app), and demonstration in farmers field. Each technology itself solely or combination of two or more or all the packages can combat the insect pests, save natural enemies, harvest expected yield and contribute to safe food production in Bangladesh. Bangladesh Rice J. 25 (1) : 1-22, 2021


2019 ◽  
Vol 19 (4) ◽  
Author(s):  
Catherine M Little ◽  
Thomas W Chapman ◽  
N Kirk Hillier

AbstractThe past 100 yr have seen dramatic philosophical shifts in our approach to controlling or managing pest species. The introduction of integrated pest management in the 1970s resulted in the incorporation of biological and behavioral approaches to preserve ecosystems and reduce reliance on synthetic chemical pesticides. Increased understanding of the local ecosystem, including its structure and the biology of its species, can improve efficacy of integrated pest management strategies. Pest management strategies incorporating insect learning paradigms to control insect pests or to use insects to control other pests can mediate risk to nontarget insects, including pollinators. Although our understanding of insect learning is in its early stages, efforts to integrate insect learning into pest management strategies have been promising. Due to considerable differences in cognitive abilities among insect species, a case-by-case assessment is needed for each potential application of insect learning within a pest management strategy.


2020 ◽  
Vol 113 (5) ◽  
pp. 2061-2068
Author(s):  
Jia-Wei Tay ◽  
Dong-Hwan Choe ◽  
Ashok Mulchandani ◽  
Michael K Rust

Abstract Here, we review the literature on the development and application of hydrogel compounds for insect pest management. Researchers have used hydrogel compounds for the past few decades to achieve the controlled release of various contact insecticides, but in recent years, hydrogel compounds have also been used to absorb and deliver targeted concentrations of toxicants within a liquid bait to manage insect pests. The highly absorbent hydrogel acts as a controlled-release formulation that keeps the liquid bait available and palatable to the target pests. This review discusses the use of various types of hydrogel compounds in pest management based on different environmental settings (e.g., agricultural, urban, and natural areas), pest systems (e.g., different taxa), and modes of insecticide delivery (e.g., spray vs bait). Due to their unique physicochemical properties, hydrogel compounds have great potential to be developed into new and efficacious pest management strategies with minimal environmental impact. We will also discuss the future research and development of hydrogels in this review.


2014 ◽  
Vol 54 (3) ◽  
pp. 205-210 ◽  
Author(s):  
David William Hagstrum ◽  
Paul Whitney Flinn

Abstract Stored-product entomologists have a variety of new monitoring, decision-making, biological, chemical, and physical pest management tools available to them. Two types of stored-product insect populations are of interest: insects of immediate economic importance infesting commodities, and insects that live in food residues in equipment and facilities. The sampling and control methods change as grain and grain products move from field to consumer. There are also some changes in the major insect pest species to take into consideration. In this review, we list the primary insect pests at each point of the marketing system, and indicate which sampling methods and control strategies are most appropriate. Economic thresholds for insect infestation levels developed for raw commodity storage, processing plants, and retail business allow sampling-based pest management to be done before insect infestations cause economic injury. Taking enough samples to have a representative sample (20-30 samples) will generally provide enough information to classify a population as above or below an economic threshold.


2018 ◽  
Vol 1 (3) ◽  
Author(s):  
AMAR BAHADUR BAHADUR

Entomopathogens are microorganisms that pathogenic to insect pest. Several species of naturally occurring viz; fungi, bacteria, viruses and nematodes, infect a variety of insect pests and play an important role in agricultural crops controlling insect pest management.  This kind of biopesticide has many advantages and alternative to chemical insecticides, highly specific, safe, and environmentally sustainable. Pest problems are an almost inevitable part of agriculture. They occur largely because agricultural systems are simplified and modifications of natural ecosystems. Viruses, bacteria are host specific and fungi generally have broader host range and can infect both underground and aboveground pests, soil-dwelling nature nematodes are more suitable for managing soil pests. Growing crops in monoculture provides concentrated food resource that allows pest populations to achieve higher densities in natural environments. Some of the most important problems occur when pests develop resistance to chemical pesticides. These cause highly significant damage to crops, there are also threats from emerging new strains of pests. Crops cultivation can make the physico-chemical environment more favourable for pest activity. Agricultural pests are reducing the yield and quality of produce by feeding on crops, transmitting diseases. Agricultural production significantly loss crop yields, suggest that improvements in pest management are significant forward for improving yields. Crop growers are under immense pressure to reduce the use of chemical pesticides without sacrificing yields, but at the same time manage of pests is becoming difficult due to pesticide resistance and the decreasing availability of products. Alternative methods are needed urgently. These need to be used as part of Integrated Pest Management safety and environmental impact.  


1998 ◽  
Vol 8 (2) ◽  
pp. 150-153
Author(s):  
J. Kabashima ◽  
T.D. Paine ◽  
R. Redak

Pesticide use in the landscape has been reduced through the implementation of integrated pest management (IPM) (Holmes and Davidson, 1984, Olkowski et al., 1978; Smith and Raupp, 1986). IPM emphasizes prevention, identifying pests and their symptoms, regular surveying for pests, determining action thresholds and guidelines, and using sound management methods. Monitoring techniques such as pheromone traps, degree-day models, and ELISA kits, in addition to traditional methods, have enabled pest managers to determine accurately when to apply IPM techniques. Examples of serious California landscape insect pests successfully controlled through IPM include the ash whitefly [Siphoninus phillyreae (Halliday)], the Nantucket pine tip moth [Rhyacionia frustrana (Comstock)], and the eucalyptus longhorned borer (Phoracantha semipunctata F.).


Sign in / Sign up

Export Citation Format

Share Document