Whole Stand Yield and Density Equations for Fourteen Forest Types in Minnesota

1993 ◽  
Vol 10 (2) ◽  
pp. 75-85 ◽  
Author(s):  
David K. Walters ◽  
Alan R. Ek

Abstract Models that estimate per acre basal area, number of stems, quadratic mean diameter, volumes to specified top diameters, and biomass per acre by stand age and site index were developed and fitted to data for 14 forest types in Minnesota. The resulting equations were developed from linear and nonlinear least squares analyses using USDA Forest Service Forest Inventory and Analysis data. These equations are intended for projecting future forest characteristics including yield on a statewide basis assuming the continuation of the level of management inherent in the data. Parameter estimates and goodness-of-fit statistics are provided for each model. Also discussed are the implementation procedures, assumptions, consistency of estimates, estimates for mixed species stands, and other considerations in applications. North. J. Appl. For. 10(2): 75-85.

2005 ◽  
Vol 35 (1) ◽  
pp. 113-121 ◽  
Author(s):  
Kjell Karlsson ◽  
Lennart Norell

The probability that an individual tree will remain in even-aged Norway spruce (Picea abies (L.) Karst.) stands subjected to different thinning programmes was modelled, using data from a thinning experiment established in 25 localities in southern Sweden. A logistic regression approach was used to predict the probability and the Hosmer–Lemeshow goodness-of-fit test to evaluate the fit. Diameter at breast height (DBH), quadratic mean DBH, thinning intensity, thinning quotient, basal area, number of stems per hectare, stand age, number of thinnings, and site index were used as explanatory variables. Separate analyses for stands thinned from below, stands thinned from above, and unthinned stands were performed. The modelled probability graphs for trees not being removed, plotted against their diameter at breast height, had clear S-shapes for both unthinned stands and stands thinned from below. The graph for stands thinned from above was bell-shaped.


2019 ◽  
Vol 76 (4) ◽  
Author(s):  
Juan Alberto Molina-Valero ◽  
Ulises Diéguez-Aranda ◽  
Juan Gabriel Álvarez-González ◽  
Fernando Castedo-Dorado ◽  
César Pérez-Cruzado

Abstract Key message Site form and site index have shown similar precision for estimating site quality in even-agedPinus radiataD. Don stands in north-western Spain. Additionally, SF presents the advantage that it does not require stand age information and can therefore be used in a wider set of situations in the forestry practice. Context Estimation of site quality is essential for characterizing, monitoring and predicting forest resources. Site index (i.e. the dominant height of the stand at a reference age) is ordinarily used to estimate site quality; however, this index is only useful for even-aged stands of known age. By contrast, SF is age-independent as it uses the dominant height of the stand at a reference dominant diameter. Aims The aim of this study was to compare the performance of SF and SI for site quality estimation in even-aged P. radiata stands. Methods Dynamic equations derived with the Generalized Algebraic Difference Approach (GADA) from the Hossfeld IV base model were fitted to predict site quality with both SI and SF. SF predictions were compared with SI regarding variability within the same plot and consistency in site quality predictions, using the observed maximum mean annual volume increment (MAI) as a direct measure of site quality. Results Both approaches showed good performance in model fitting and provided similar goodness-of-fit statistics and variability in the predictions. However, SI performed slightly stronger when related to MAI. Conclusion SF performed adequately in estimating site quality for even-aged P. radiata stands, with results comparable to those obtained using traditional SI.


2013 ◽  
Vol 43 (3) ◽  
pp. 256-265 ◽  
Author(s):  
Oscar García

A biologically inspired whole-stand growth and yield model was developed for even-aged thinned or unthinned stands dominated by trembling aspen (Populus tremuloides Michx.). The estimation used permanent sample plot data from British Columbia, Alberta, Saskatchewan, and Manitoba, supplemented by published site index and young stand information. An ingrowth imputation procedure was devised to facilitate the use of plot measurements where small trees are not measured. Two published site index models were closely approximated by a simple age-base invariant equation. Good parameter estimates for mortality and basal area growth were obtained without using age observations, which were unreliable or missing. Four differential equations describe the dynamics of top height, trees per hectare, basal area, and a site occupancy factor. Current values of these variables are used to estimate total and merchantable volumes up to any diameter limit and diameter distribution parameters. When an independent source of site quality estimates is available, the final model does not require stand age knowledge for making growth and yield predictions.


1979 ◽  
Vol 9 (3) ◽  
pp. 428-435 ◽  
Author(s):  
Gregory W. Crook ◽  
Paul E. Vézina ◽  
Yvan Hardy

Spruce budworm, Choristoneurafumiferana (Clemens), defoliation of balsam fir, Abiesbalsamea (L.) Mill., was studied in thinned stands of the Lower St. Lawrence region of Quebec. The object of the study was to quantify defoliation levels in treated and control plots in order to determine what effect, if any, thinning had on the susceptibility of balsam fir.Three main forest types were studied: (a) coniferous, (b) mixed, and (c) hardwood with a fir understory. The coniferous forest type was subdivided into three types: (1) pure balsam fir; (2) balsam fir – white spruce, Piceaglauca (Moench) Voss; (3) balsam fir – hardwoods. Defoliation levels were estimated using two current techniques: the Dorais–Hardy (1976) and the Fettes (1950) methods.Susceptibility of balsam fir to spruce budworm defoliation was not affected after thinning in coniferous and hardwood forest types; however, susceptibility was increased in mixed stands when part of the hardwood cover was removed. In any situation, defoliation of fir was found to be more intense with an increase of the basal area of the coniferous species (balsam fir, red spruce, Picearubens Sarg., and white spruce) while an increase of the basal area of hardwoods resulted in lower defoliation levels; likewise, a higher number of stems per hectare brought higher defoliation levels of fir. Defoliation was also found to vary with stand composition; susceptibility of fir in the three main cover types decreased in the following order: (a) coniferous, (b) mixed, (c) hardwood. Stand age was not a factor influencing the susceptibility of balsam fir for the two age classes studied (30 and 50 years).


2020 ◽  
Vol 12 (11) ◽  
pp. 1854
Author(s):  
Dominik Seidel ◽  
Peter Annighöfer ◽  
Martin Ehbrecht ◽  
Paul Magdon ◽  
Stephan Wöllauer ◽  
...  

The three-dimensional forest structure is an important driver of several ecosystem functions and services. Recent advancements in laser scanning technologies have set the path to measuring structural complexity directly from 3D point clouds. Here, we show that the box-dimension (Db) from fractal analysis, a measure of structural complexity, can be obtained from airborne laser scanning data. Based on 66 plots across different forest types in Germany, each 1 ha in size, we tested the performance of the Db by evaluating it against conventional ground-based measures of forest structure and commonly used stand characteristics. We found that the Db was related (0.34 < R < 0.51) to stand age, management intensity, microclimatic stability, and several measures characterizing the overall stand structural complexity. For the basal area, we could not find a significant relationship, indicating that structural complexity is not tied to the basal area of a forest. We also showed that Db derived from airborne data holds the potential to distinguish forest types, management types, and the developmental phases of forests. We conclude that the box-dimension is a promising measure to describe the structural complexity of forests in an ecologically meaningful way.


2006 ◽  
Vol 23 (3) ◽  
pp. 211-214
Author(s):  
John R. Brooks ◽  
Harry V. Wiant

Abstract A simple whole stand yield equation based solely on basal area per acre for sawtimber-sized trees and average dominant height was found to provide reasonably accurate estimates of board foot (International) yield in Appalachian hardwoods. Separate parameter estimates were obtained for mesophytic hardwood and mixed oak remeasurement plot data and the yield tables of Schnur (Schnur, G.L. 1937. Yield, stand and volume tables for even-aged upland oak forests. USDA Tech. Bull. 560). Estimates of board foot yield per acre for the remeasurement plot data were within 10% of observed values for stands over 30 years old and within 5% for stands over 45 years old. A separate model form based on the same two input variables was developed for Schnur’s yield table data for site index classes 50–80. Estimates of board foot yield were within 10% of tabular values for stands over 45 years old, regardless of site index class.


1994 ◽  
Vol 11 (4) ◽  
pp. 141-145
Author(s):  
Carol A. Hyldahl ◽  
Gerald H. Grossman

Abstract RPGrow$ is a spreadsheet that interactively projects standlevel growth and yield with financial analysis of red pine plantations in the Lake States. Three types of commonly found conditions related to red pine management can be analyzed: (1) an entire rotation from initial planting to final harvest; (2) an existing stand from any point in time until final harvest; and (3) conversion of an existing stand to red pine (marginal analysis). Stand growth projections are for 70 yr. User input includes site index, stand age, initial basal area, trees per acre, thinning regime, costs associated with establishment and culture, tax rates, inflation rate, and discount rate. RPGrow$ calculates and values pulpwood and sawtimber volumes from user-defined stumpage prices. The financial analysis uses discounted cash flow methods to calculate results both with and without tax effects. Different stand management scenarios and economic factors can be compared easily through sensitivity analysis. North. J. Appl. For. 11(4):141-145.


Forests ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 451 ◽  
Author(s):  
Ram P. Sharma ◽  
Igor Štefančík ◽  
Zdeněk Vacek ◽  
Stanislav Vacek

Individual tree growth and yield models precisely describe tree growth irrespective of stand complexity and are capable of simulating various silvicultural alternatives in the stands with diverse structure, species composition, and management history. We developed both age dependent and age independent diameter increment models using long-term research sample plot data collected from both monospecific and mixed stands of European beech (Fagus sylvatica L.) in the Slovak Republic. We used diameter at breast height (DBH) as a main predictor and other characteristics describing site quality (site index), stand development stage (dominant height and stand age), stand density or competition (ratio of individual tree DBH to quadratic mean diameter), species mixture (basal area proportion of a species of interest), and dummy variable describing stand management regimes as covariate predictors to develop the models. We evaluated eight versatile growth functions in the first stage using DBH as a single predictor and selected the most suitable one, i.e., Chapman-Richards function for further analysis through the inclusion of covariate predictors. We introduced the random components describing sample plot-level random effects and stochastic variations on the diameter increment, into the models through the mixed-effects modelling. The autocorrelation caused by hierarchical data-structure, which is assumed to be partially reduced by mixed-effects modelling, was removed through the inclusion of the parameter accounting for the autoregressive error-structures. The models described about two-third parts of a total variation in the diameter increment without significant trends in the residuals. Compared to the age independent mixed-effects model (conditional coefficient of determination, R c 2 = 0.6566; root mean square error, RMSE = 0.1196), the age dependent model described a significantly larger proportion of the variations in diameter increment ( R c 2 = 0.6796, RMSE = 0.1141). Diameter increment was significantly influenced differently by covariate predictors included into the models. Diameter increment decreased with the advancement of stand development stage (increased dominant height and stand age), increasing intraspecific competition (increased basal area proportion of European beech per sample plot), and diameter increment increased with increasing site quality (increased site index) and decreased competition (increased ratio of DBH to quadratic mean diameter). Our mixed-effects models, which can be easily localized with the random effects estimated from prior measurement of diameter increments of four randomly selected trees per sample plot, will provide high prediction accuracies. Our models may be used for simulating growth of European beech irrespective of its stand structural complexity, as these models have included various covariate variables describing both tree-and stand-level characteristics, thinning regimes, except the climate characteristics. Together with other forest models, our models will be used as inputs to the growth simulator to be developed in the future, which is important for decision-making in forestry.


1996 ◽  
Vol 72 (2) ◽  
pp. 181-184 ◽  
Author(s):  
Bijan Payandeh ◽  
Yonghe Wang

Plonski's yield tables have been used extensively in forest management, economic evaluation, and as a basis for management planning in Ontario. However, because these tables are based on site classes, they are not directly applicable to uneven-aged mixed-wood cover types. A four-parameter nonlinear model was employed to express various stand attributes as a function of stand age and recently developed basal area indices for the major species in Ontario. The resulting variable stocking yield functions will be applicable to even-aged stands as well as the boreal mixedwood. Basal area index proved superior to site index for estimating both merchantable basal area and volume for the James River/Marathon data set representing boreal mixed from Northcentral Ontario. In addition, stand basal area index may be determined easily and inexpensively via horizontal point sampling or prism cruising. Key word: Basal area index, sigmoidal growth curve, variable stocking


1983 ◽  
Vol 13 (1) ◽  
pp. 70-77 ◽  
Author(s):  
Frederick C. Hall

Growth basal area (GBA) is a field method for determining site potential limitations on stockability. It is defined as the basal area (BA) at which dominant trees grow 1 in. (25 mm) diameter per decade at age 100. Diameter growth is a constant used to compare sites; basal area is a variable used to express different site potentials for stockability. For example, a site with GBA = 220 ft2/acre (50 m2/ha) means dominants will grow 1 in. per decade (25 mm) in diameter at 220 ft2 BA. This is twice the stockability potential of a site with GBA = 110 ft2 (25 m2/ha). GBA is determined by relating current stand diameter growth rate and BA to a curve which permits adjustment of current BA to that for 1 in. per decade diameter growth. GBA is based on two assumptions: (i) rate of diameter growth decreases with increasing basal area and is an index of intertree competition. (ii) Change in GBA with age is related to stand age. GBA can be combined with site index (SI), shown as SI-GBA, to connote different productivities within an SI class. GBA is discussed in regard to concept of GBA curve development, assumptions made, applications, and constraints.


Sign in / Sign up

Export Citation Format

Share Document