Cutlink Cleaning Head with a Spreading Feature for Biological Sprout Control

The ability of deciduous trees to sprout efficiently after cutting is problematic in young forests where the target is to cultivate coniferous trees for industry. Since the use of chemicals has been restricted, new alternatives are needed. One potential and environmentally friendly option is biological sprout control that is based on the use of a white-rot fungus, Chondrostereum purpureum (Pers. Ex Fr.) Pouzar. This method has been efficient in earlier investigations when performed manually, but efficient, fully mechanized devices which are able to cut and treat stumps with a fungus are still unavailable. Therefore, the efficacy of biological sprout control conducted with a Cutlink cleaning head equipped with a spreading feature was studied in two young Norway spruce (Picea abies (L.) H. Karst.) forests in central Finland.Sample plots for the control (cutting deciduous saplings only) and fungal treatment (cutting and spreading fungal inoculum on fresh stump surfaces) were established, and the ability of the Cutlink cleaning head in preventing sprouting of silver and downy birch (Betula pendula Roth and B. pubescens Ehrh., respectively) in the sample plots was investigated for two years.In the near vicinity of cultivated Norway spruce, the proportion of cut deciduous saplings varied from 50–60% after the Cutlink operation. The average mortality of silver and downy birch stumps in the fungal treatment plots was ca. 40%, while stump mortality in the control, i.e., cutting only, was only ca. 13%, after two years. Stump mortality increased up to 73% if the stumps did not include old branches, i.e., the stump was cut to a low enough height.These results confirmed that the Cutlink cleaning head is a potential tool in young stand management operation but further development will be needed in working methods in order to achieve lower stump heights (no branches on the stump) and also to increase the proportion of cut saplings.

The important role of multifunctional forests in society: a methodology for stands delimitation

Forest planning and management must be conceived in accordance with the circumstances and needs of the moment. Nowadays, the forest does not have a single and exclusive productive use but responds to multiple demands. The stand management method, with a broad approach, is has been recently well adapted to this type of multipurpose management. This study proposes a methodology for delimiting stands which led to manage different uses in forests in protected areas. The methodology consists of six phases: (i) create permanents units (ii) initial identification of forest typologies, (iii) image analysis, (iv) identification of tree types within the forest typology, (v) detailed inventory and (vi) formation of stands. An example is presented for the “Monte Paris” forest, located a few kilometers from Madrid, which combines protective, livestock and recreational use. For the protection use, pruning and thinning will be carried out, for the livestock use, supplementation, meadow sowing and enclosures, and for the recreational use, the design of an environmental center and five ecological trails are proposed. The organization in time and space of the activities planned in the stands allows a correct and satisfactory management of the multiple uses that occur in this forest.

Forest Stand Management and Biomass Growth

Forests are natural or semi-natural systems that can generate services and products that humans use directly or indirectly [...]

Digital Transformation of Forest Services in Finland—A Case Study for Improving Business Processes

This case study introduces an innovation and development concept for agile software tools for the improvement of the productivity and customer experience of forest services. This need was recognized in the context of the opening of forest data and the development of service platforms for a forest-based bioeconomy in Finland. The forest services that were studied covered a continuum from a single type of work, e.g., soil preparation and young stand management through timber procurement, to comprehensive forest property management services. The study concentrated on the needs of micro-, small, and medium-sized enterprises (SMEs), which provide either retail- or business to business (B2B) services as sub-contractors. In addition, the challenges and bottlenecks in service processes detected by other stakeholders were considered. The prevailing service processes were conceptually modelled in order to search for opportunities for improvements in business and ecosystem services, i.e., agile software concepts. For example, we examined whether it would be possible to create opportunities for flexible operational models for precision, resilience, and protection of valuable microsites in forests. These software concepts were developed and evaluated in co-operation with the stakeholders in a co-creative workshop. The technological feasibility and commercial viability of the concepts, as well as the desirability for the customer were considered. The results of this business development process—i.e., agile software concepts and their anticipated benefits—were provided for further evaluation. In addition to the practical implications of this kind of innovation process tested, the potential of these kinds of agile tools for the further development of knowledge-intensive service processes was further discussed.

Influence of the Apron Parking Stand Management Policy on Aircraft and Ground Support Equipment (GSE) Gaseous Emissions at Airports

The purpose of this study is to analyze the concept of a hybrid apron with a fixed number of parking positions considering the management model influence for the average delay per aircraft and the gaseous emissions generated by aircraft and ground support equipment (GSE) altogether. The apron is studied based on two gate management models: in the first model, the aircraft are allocated in each gate due to operational factors only; in the second model, the rules of exclusive use of each gate according to the airline are included. The emissions generated by aircraft operations and that of their GSE (produced by the service and movements on the apron) are quantified and compared in the two gate management models: operation in the standard LTO cycle of the studied aircraft, GSE emissions have a similar relation with the compared gasses (NOx and CO), ranging between 1% and 3%. Further, if it compares the emissions between support vehicles and aircraft taking only into account the in-out taxiway, the relation between both CO sources shows similar values to those of the previous comparison, whereas NOx emissions produced by GSE reach an approximately 20%. The study considers different demand conditions obtained from the average day of the peak month of Aeroparque Jorge Newbery airport. Subsequently, through the SIMMOD PLUS software, the aircraft operations are simulated. The gates assignment and the arrival timetables are used as inputs for the GSE study due to an analytical model developed by us. Once the operational dimension is characterized and evaluated, the necessary data to quantify the gaseous emissions from the sources (Aircraft-GSE), based on the International Civil Aviation Organization (ICAO) guidelines, is obtained.

Nordic Bioeconomic Pathways - catchment scale water quality impacts of various scenarios and projections

<p>The development, the alternative pathways for use of bioresources, can lead to plausible stressors in the future on forestry dominated catchments. It is needed to analyse the impact of regional future projections on different land system management (LSM) attributes. The catchment scale projections are downscaled from Nordic Bioeconomic Pathways (NBPs), the subsets of Shared Socioeconomic Pathways (SSPs). As a case study, the Simojoki catchment (3160 km<sup>2</sup>) in northern Finland has been considered where drained peatlands and forests dominate (53%) in the catchment. We integrated stakeholder-driven input, Finnish forest inventory model pathways (MELA) and hydrological catchment model (SWAT) to explore the future consequences of forest management practices for different NBP scenarios. We calibrated and validated water quality parameters in SWAT for the Simojoki catchment. Then, based on the output of MELA model of LSM attributes including stand management, catchment management strategy and fertilizer use, we used NBP scenario projections in SWAT model. We also included stakeholders’ evaluations of biomass removal at the time of harvesting at the Simojoki catchment. Additionally, climate imposing emission scenarios have been integrated into SWAT model to analyse longer perception of climate change (CC). The final outcomes of the proposed scenarios (NBP and/or CC<strong>)</strong> will portray the probable impacts on each LSM attribute in the Simojoki catchment, to adapt to the future forest management consequences.</p>

Does Juvenile Stand Management Matter? Regional Scenarios of the Long-Term Effects on Wood Production

We analysed the regional level effects of juvenile stand management (early cleaning and precommercial thinning), shortly termed tending on wood production and the profitability of forest management. Altogether ca. 0.4 million hectares of juvenile stands from two significant forestry regions of Finland, South and North Savo, were examined. We used plot-level data of the 11th National Forest Inventory to represent the current status of juvenile stands in the study area, and the Motti stand simulator to predict the future developments of those stands for the next 100 years. We applied three scenarios: (i) Timely tending, (ii) delayed tending, and (iii) no tending, to examine differences between these alternative levels of juvenile stand management. The results showed the benefits of tending at a regional level. Timely tending was the most profitable option when low or modest interest rates (2–3%) were applied in the assessment. Even a short delay in tending clearly increased the tending costs. Delaying and neglecting tending resulted in significant losses, especially in sawlog removals and stumpage earnings. The financial gain from tending was the highest on fertile sites. Due to the high growth rate of trees, the situation may change very quickly on such sites. For the operational forestry, this means that fertile sites should have a high priority when conducting timely tendings.

Cost-efficient pre-commercial thinning: effects of method and season of early cleaning

This study’s aim was to identify how the application season and the method of early cleaning (EC), the first stage of multistage pre-commercial thinning (PCT), affected the time consumption in EC and in the subsequent second PCT operation. The worktime in EC was recorded in the spring, summer, and autumn in 22 sites, which were either totally cleaned or point cleaned. Later, these sites were measured at the time of the second PCT. Time consumption was estimated in PCT, based on the removal of the sites. The time consumption in EC was 5.3 productive work hours (pwh) ha, 7.3 pwh ha, and 6.2 pwh ha respectively in the spring, summer, and autumn. EC in the spring instead of the summer saved 27–30% of working time, depending on the cleaning method. Point cleaning was 0.8 pwh ha quicker than total cleaning, but the difference was statistically insignificant. The second stage, PCT, was 1 pwh ha slower to conduct in sites which had been early cleaned in the spring instead of the summer. However, at the entire management program level, EC applied in the spring or autumn instead of the summer saved 11% or 5% respectively of the total discounted costs (3% interest rate) of multistage pre-commercial thinning. Today, the commonest time to conduct EC is in the summer, which was the most expensive of the analyzed management alternatives here. We can expect savings in juvenile stand management in forestry throughout boreal conifer forests by rethinking the seasonal workforce allocation.–1–1–1–1–1