scholarly journals Altering the rate-determining step over cobalt single clusters leading to highly efficient ammonia synthesis

Author(s):  
Sisi Liu ◽  
Mengfan Wang ◽  
Haoqing Ji ◽  
Xiaowei Shen ◽  
Chenglin Yan ◽  
...  

Abstract Activation of high-energy triple-bonds of N2 is the most significant bottleneck of ammonia synthesis under ambient conditions. Here, by importing cobalt single clusters as strong electron-donating promoter into the catalyst, the rate-determining step of ammonia synthesis is altered to the subsequent proton addition so that the barrier of N2 dissociation can be successfully overcome. As revealed by density functional theory calculations, the N2 dissociation becomes exothermic over the cobalt single cluster upon the strong electron backdonation from metal to the N2 antibonding orbitals. The energy barrier of the positively shifted rate-determining step is also greatly reduced. At the same time, advanced sampling molecular dynamics simulations indicate a barrier-less process of the N2 approaching the active sites that greatly facilitates the mass transfer. With suitable thermodynamic and dynamic property, a high ammonia yield rate of 76.2 μg h–1 mg$^{-1 }_{\rm cat.}$ and superior Faradaic efficiency of 52.9% were simultaneously achieved.

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhen-Yu Wu ◽  
Mohammadreza Karamad ◽  
Xue Yong ◽  
Qizheng Huang ◽  
David A. Cullen ◽  
...  

AbstractElectrochemically converting nitrate, a widespread water pollutant, back to valuable ammonia is a green and delocalized route for ammonia synthesis, and can be an appealing and supplementary alternative to the Haber-Bosch process. However, as there are other nitrate reduction pathways present, selectively guiding the reaction pathway towards ammonia is currently challenged by the lack of efficient catalysts. Here we report a selective and active nitrate reduction to ammonia on Fe single atom catalyst, with a maximal ammonia Faradaic efficiency of ~ 75% and a yield rate of up to ~ 20,000 μg h−1 mgcat.−1 (0.46 mmol h−1 cm−2). Our Fe single atom catalyst can effectively prevent the N-N coupling step required for N2 due to the lack of neighboring metal sites, promoting ammonia product selectivity. Density functional theory calculations reveal the reaction mechanisms and the potential limiting steps for nitrate reduction on atomically dispersed Fe sites.


2019 ◽  
Vol 7 (9) ◽  
pp. 4389-4394 ◽  
Author(s):  
Ke Chu ◽  
Ya-ping Liu ◽  
Yu-biao Li ◽  
Hu Zhang ◽  
Ye Tian

Density functional theory calculations revealed that CoO possessed poor HER activity but favorable NRR activity. CoO quantum dots (2–5 nm) supported on graphene exhibited a high NH3 yield of 21.5 μg h−1 mg−1 and a faradaic efficiency of 8.3% at −0.6 V vs. RHE under ambient conditions, superior to most of the reported NRR catalysts.


2020 ◽  
Vol 117 (3) ◽  
pp. 1330-1338 ◽  
Author(s):  
Baowen Zhou ◽  
Pengfei Ou ◽  
Nick Pant ◽  
Shaobo Cheng ◽  
Srinivas Vanka ◽  
...  

A rational design of an electrocatalyst presents a promising avenue for solar fuels synthesis from carbon dioxide (CO2) fixation but is extremely challenging. Herein, we use density functional theory calculations to study an inexpensive binary copper−iron catalyst for photoelectrochemical CO2 reduction toward methane. The calculations of reaction energetics suggest that Cu and Fe in the binary system can work in synergy to significantly deform the linear configuration of CO2 and reduce the high energy barrier by stabilizing the reaction intermediates, thus spontaneously favoring CO2 activation and conversion for methane synthesis. Experimentally, the designed CuFe catalyst exhibits a high current density of −38.3 mA⋅cm−2 using industry-ready silicon photoelectrodes with an impressive methane Faradaic efficiency of up to 51%, leading to a distinct turnover frequency of 2,176 h−1 under air mass 1.5 global (AM 1.5G) one-sun illumination.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xinhao Wu ◽  
Yanan Guo ◽  
Zengsen Sun ◽  
Fenghua Xie ◽  
Daqin Guan ◽  
...  

AbstractElectrochemical CO2 reduction (ECR) is highly attractive to curb global warming. The knowledge on the evolution of catalysts and identification of active sites during the reaction is important, but still limited. Here, we report an efficient catalyst (Ag-D) with suitable defect concentration operando formed during ECR within several minutes. Utilizing the powerful fast operando X-ray absorption spectroscopy, the evolving electronic and crystal structures are unraveled under ECR condition. The catalyst exhibits a ~100% faradaic efficiency and negligible performance degradation over a 120-hour test at a moderate overpotential of 0.7 V in an H-cell reactor and a current density of ~180 mA cm−2 at −1.0 V vs. reversible hydrogen electrode in a flow-cell reactor. Density functional theory calculations indicate that the adsorption of intermediate COOH could be enhanced and the free energy of the reaction pathways could be optimized by an appropriate defect concentration, rationalizing the experimental observation.


2020 ◽  
Vol 8 (4) ◽  
pp. 2099-2104 ◽  
Author(s):  
Silong Chen ◽  
Haeseong Jang ◽  
Jia Wang ◽  
Qing Qin ◽  
Xien Liu ◽  
...  

MoFe-PC exhibits a high yield rate and faradaic efficiency for NH3 electrosynthesis in acidic electrolytes due to the multicomponent active sites and inherent porous structure.


2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Xuewan Wang ◽  
Dan Wu ◽  
Suyun Liu ◽  
Jiujun Zhang ◽  
Xian-Zhu Fu ◽  
...  

AbstractEfficient and robust single-atom catalysts (SACs) based on cheap and earth-abundant elements are highly desirable for electrochemical reduction of nitrogen to ammonia (NRR) under ambient conditions. Herein, for the first time, a Mn–N–C SAC consisting of isolated manganese atomic sites on ultrathin carbon nanosheets is developed via a template-free folic acid self-assembly strategy. The spontaneous molecular partial dissociation enables a facile fabrication process without being plagued by metal atom aggregation. Thanks to well-exposed atomic Mn active sites anchored on two-dimensional conductive carbon matrix, the catalyst exhibits excellent activity for NRR with high activity and selectivity, achieving a high Faradaic efficiency of 32.02% for ammonia synthesis at  − 0.45 V versus reversible hydrogen electrode. Density functional theory calculations unveil the crucial role of atomic Mn sites in promoting N2 adsorption, activation and selective reduction to NH3 by the distal mechanism. This work provides a simple synthesis process for Mn–N–C SAC and a good platform for understanding the structure-activity relationship of atomic Mn sites. Graphic Abstract


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Guangfu Qian ◽  
Jinli Chen ◽  
Tianqi Yu ◽  
Jiacheng Liu ◽  
Lin Luo ◽  
...  

AbstractConstructing heterojunction is an effective strategy to develop high-performance non-precious-metal-based catalysts for electrochemical water splitting (WS). Herein, we design and prepare an N-doped-carbon-encapsulated Ni/MoO2 nano-needle with three-phase heterojunction (Ni/MoO2@CN) for accelerating the WS under industrial alkaline condition. Density functional theory calculations reveal that the electrons are redistributed at the three-phase heterojunction interface, which optimizes the adsorption energy of H- and O-containing intermediates to obtain the best ΔGH* for hydrogen evolution reaction (HER) and decrease the ΔG value of rate-determining step for oxygen evolution reaction (OER), thus enhancing the HER/OER catalytic activity. Electrochemical results confirm that Ni/MoO2@CN exhibits good activity for HER (ƞ-10 = 33 mV, ƞ-1000 = 267 mV) and OER (ƞ10 = 250 mV, ƞ1000 = 420 mV). It shows a low potential of 1.86 V at 1000 mA cm−2 for WS in 6.0 M KOH solution at 60 °C and can steadily operate for 330 h. This good HER/OER performance can be attributed to the three-phase heterojunction with high intrinsic activity and the self-supporting nano-needle with more active sites, faster mass diffusion, and bubbles release. This work provides a unique idea for designing high efficiency catalytic materials for WS.


2020 ◽  
Author(s):  
Yali Ji ◽  
Zheng Chen ◽  
Chao Yang ◽  
Yuhang Wang ◽  
Jie Xu ◽  
...  

Abstract Electrochemical reduction of carbon monoxide (CO) has recently been emerging as a potential alternative for converting carbon emission into high-value multi-carbon products such as acetate. Nonetheless, the activity and selectivity for producing acetate have remained low. Herein, we developed an atomically ordered copper-palladium intermetallic compound (CuPd-IC) structure that achieved a high Faradaic efficiency of 70 ± 5% for CO-to-acetate production with a partial current density of 425 mA·cm− 2. This corresponded to an acetate production rate of 4.0 mmol·h− 1·cm− 2, and 5.3 times of enhancement in acetate production compared to pure Cu. Structural characterizations and density functional theory calculations suggested that CuPd-IC presents a high density of Cu-Pd pairs that act as the active sites to enrich the surface CO coverage, stabilize the surface ethenone as a key acetate-path intermediate, and inhibit hydrogen evolution reaction, thus promoting acetate formation. Using a membrane electrode assembly device, the CuPd-IC catalyst enabled 100 hours of CO-to-acetate operation at 500 mA·cm− 2 and an average acetate Faradaic efficiency of 43%, producing ~ 2 mol acetate.


2021 ◽  
pp. 2151027
Author(s):  
Qiming Yu ◽  
Hongming Wang

Electrocatalytic nitrogen reduction under ambient conditions is a promising approach for ammonia synthesis, but it is challenging to develop highly efficient electrocatalysts. In this work, a hybrid of covalent organic framework (COF) and carbon nanotubes (CNTs) are developed for efficient nitrogen electroreduction with a high faradaic efficiency (FE) of 12.7% at 0.0 V versus reversible hydrogen electrode (RHE) and a remarkable production rate of ammonia up to 8.56 [Formula: see text]g h[Formula: see text] mg[Formula: see text] at –0.2 V versus RHE. Experiments and theoretical calculations reveal that Ni centers are active sites for NH3 synthesis, while the [Formula: see text]–[Formula: see text] stacking between COF-366-Ni and conductive CNTs scaffold results in the rapid interfacial charge transfer. This investigation provides new insights on the rational design of organic–inorganic porous hybrids for efficient nitrogen conversion and ammonia synthesis at ambient conditions.


2021 ◽  
Vol 02 ◽  
Author(s):  
Guangbin Wang ◽  
Renna Zhao ◽  
Fahao Ma ◽  
Zeyan Wang ◽  
Peng Wang ◽  
...  

Background: At present, industrial synthesis of NH3 mainly relies on the Haber-Bosch process, which is characterized by harsh reaction conditions and high energy consumption. Electrochemical nitrogen reduction is considered to be a mild and sustainable alternative method for producing NH3, but efficient electrocatalyst under ambient conditions is the prerequisite for NH3 production. Objective: To demonstrate that CP@MnO2 ultralong nanowires is a highly-efficient electrocatalyst for N2 reduction reaction (NRR) under ambient conditions. Methods: The α-phase MnO2 synthesized by one-step hydrothermal method has an ultralong nanowires structure and oxygen vacancy defects. The catalysts was characterized by XRD, TEM, XPS, etc. The produced NH3 was estimated by indophenol blue method by UV-vis absorption spectra. Results: Such catalyst attains high Faradaic efficiency (FE) of 8.8% and a large NH3 yield of 1.13×10−10 mol cm−2 s−−1 at −0.7 V versus reversible hydrogen electrode in 0.1 M Na2SO4. In addition, the catalyst also shows high electrochemical stability and selectivity for NH3 formation. Conclusion: MnO2 ultralong nanowires can expose higher density of active sites and the spontaneously formed oxygen vacancies can manipulate the electronic structure of manganese oxides and provide coordination unsaturation sites (CUS) to enhance the adsorption of N2, which is the main reason for the high activity of the catalyst.


Sign in / Sign up

Export Citation Format

Share Document