scholarly journals Biomechanics and hydrodynamics of prey capture in the Chinese giant salamander reveal a high-performance jaw-powered suction feeding mechanism

2013 ◽  
Vol 10 (82) ◽  
pp. 20121028 ◽  
Author(s):  
Egon Heiss ◽  
Nikolay Natchev ◽  
Michaela Gumpenberger ◽  
Anton Weissenbacher ◽  
Sam Van Wassenbergh
Keyword(s):  
High Speed ◽  
High Performance ◽  
Prey Capture ◽  
Three Dimensional ◽  
Cranial Morphology ◽  
Suction Feeding ◽  
Mechanical Constraints ◽  
Terrestrial Life ◽  
Chinese Giant Salamander ◽  
Dynamics Simulations

During the evolutionary transition from fish to tetrapods, a shift from uni- to bidirectional suction feeding systems followed a reduction in the gill apparatus. Such a shift can still be observed during metamorphosis of salamanders, although many adult salamanders retain their aquatic lifestyle and feed by high-performance suction. Unfortunately, little is known about the interplay between jaws and hyobranchial motions to generate bidirectional suction flows. Here, we study the cranial morphology, as well as kinematic and hydrodynamic aspects related to prey capture in the Chinese giant salamander ( Andrias davidianus ). Compared with fish and previously studied amphibians, A. davidianus uses an alternative suction mechanism that mainly relies on accelerating water by separating the ‘plates’ formed by the long and broad upper and lower jaw surfaces. Computational fluid dynamics simulations, based on three-dimensional morphology and kinematical data from high-speed videos, indicate that the viscerocranial elements mainly serve to accommodate the water that was given a sufficient anterior-to-posterior impulse beforehand by powerful jaw separation. We hypothesize that this modified way of generating suction is primitive for salamanders, and that this behaviour could have played an important role in the evolution of terrestrial life in vertebrates by releasing mechanical constraints on the hyobranchial system.

scholarly journals The benefits of planar circular mouths on suction feeding performance

2012 ◽  
Vol 9 (73) ◽  
pp. 1767-1773 ◽  
Author(s):  
Tyler Skorczewski ◽  
Angela Cheer ◽  
Peter C. Wainwright
Keyword(s):  
Prey Capture ◽  
Peak Flow ◽  
Mouth Opening ◽  
Suction Feeding ◽  
Flow Rates ◽  
Computational Fluid Dynamics Simulations ◽  
Enhance Efficiency ◽  
And Performance ◽  
Dynamics Simulations ◽  
Hydrodynamic Effects

Suction feeding is the most common form of prey capture across aquatic feeding vertebrates and many adaptations that enhance efficiency and performance are expected. Many suction feeders have mechanisms that allow the mouth to form a planar and near-circular opening that is believed to have beneficial hydrodynamic effects. We explore the effects of the flattened and circular mouth opening through computational fluid dynamics simulations that allow comparisons with other mouth profiles. Compared to mouths with lateral notches, we find that the planar mouth opening results in higher flow rates into the mouth and a region of highest flow that is positioned at the centre of the mouth aperture. Planar mouths provide not only for better total fluid flow rates through the mouth but also through the centre of the mouth near where suction feeders position their prey. Circular mouths are shown to provide the quickest capture times for spherical and elliptical prey because they expose the prey item to a large region of high flow. Planar and circular mouths result in higher flow velocities with peak flow located at the centre of the mouth opening and they maximize the capacity of the suction feeders to exert hydrodynamic forces on the prey.

Age-Related Differences in Throwing Techniques Used by the Catcher in Baseball

1994 ◽  
Vol 6 (3) ◽  
pp. 225-235 ◽  
Author(s):  
Shinji Sakurai ◽  
Bruce Elliott ◽  
J. Robert Grove
Keyword(s):  
High Speed ◽  
High Performance ◽  
Age Groups ◽  
Three Dimensional ◽  
Transformation Method ◽  
High Speed Photography ◽  
Two Phase ◽  
Ball Speed ◽  
Age Related ◽  
Release Speed

Three-dimensional (3-D) high speed photography was used to record the overarm throwing actions of five open-age, four 18-year-old, six 16-year- old, and six 14-year-old high-performance baseball catchers. The direct linear transformation method was used for 3-D space reconstruction from 2-D images of the catchers throwing from home plate to second base recorded using two phase-locked cameras operating at a nominal rate of 200 Hz. Selected physical capacity measures were also recorded and correlated with ball release speed. In general, anthropometric and strength measures significantly increased through the 14-year-old to open-age classifications, while a range of correlation coefficients from .50 to .84 was recorded between these physical capacities and ball speed at release. While many aspects of the kinematic data at release were similar, the key factors of release angle and release speed varied for the different age groups.

scholarly journals A Review on the Fabrication and Reliability of Three-Dimensional Integration Technologies for Microelectronic Packaging: Through-Si-Via and Solder Bumping Process

Metals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1664
Author(s):  
Do Hoon Cho ◽  
Seong Min Seo ◽  
Jang Baeg Kim ◽  
Sri Harini Rajendran ◽  
Jae Pil Jung
Keyword(s):  
High Speed ◽  
High Performance ◽  
New Technologies ◽  
Three Dimensional ◽  
High Density ◽  
Internal Stresses ◽  
Deep Reactive Ion Etching ◽  
Fifth Generation ◽  
Precise Understanding ◽  
Fabrication Defects

With the continuous miniaturization of electronic devices and the upcoming new technologies such as Artificial Intelligence (AI), Internet of Things (IoT), fifth-generation cellular networks (5G), etc., the electronics industry is achieving high-speed, high-performance, and high-density electronic packaging. Three-dimensional (3D) Si-chip stacking using through-Si-via (TSV) and solder bumping processes are the key interconnection technologies that satisfy the former requirements and receive the most attention from the electronic industries. This review mainly includes two directions to get a precise understanding, such as the TSV filling and solder bumping, and explores their reliability aspects. TSV filling addresses the DRIE (deep reactive ion etching) process, including the coating of functional layers on the TSV wall such as an insulating layer, adhesion layer, and seed layer, and TSV filling with molten solder. Solder bumping processes such as electroplating, solder ball bumping, paste printing, and solder injection on a Cu pillar are discussed. In the reliability part for TSV and solder bumping, the fabrication defects, internal stresses, intermetallic compounds, and shear strength are reviewed. These studies aimed to achieve a robust 3D integration technology effectively for future high-density electronics packaging.

Mechanical and Optimization Analyses for Novel Wound Composite Axial Impeller

2009 ◽  
Author(s):  
Jifeng Wang ◽  
Qubo Li ◽  
Norbert Mu¨ller
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Speed ◽  
High Performance ◽  
Low Cost ◽  
Three Dimensional ◽  
Von Mises Stress ◽  
Loading Conditions ◽  
Element Analysis ◽  
Wound Composite

A mechanical and optimal analyses procedure is developed to assess the stresses and deformations of Novel Wound Composite Axial-Impeller under loading conditions particular to centrifuge. This procedure is based on an analytical method and Finite Element Analysis (FEA, commercial software ANSYS) results. A low-cost, light-weight, high-performance, composite turbomachinery impeller from differently designed patterns will be evaluated. Such impellers can economically enable refrigeration plants using water as a refrigerant (R718). To create different complex patterns of impellers, MATLAB is used for creating the geometry of impellers, and CAD software UG is used to build three-dimensional impeller models. Available loading conditions are: radial body force due to high speed rotation about the cylindrical axis and fluid forces on each blade. Two-dimensional plane stress and three-dimensional stress finite element analysis are carried out using ANSYS to validate these analytical mechanical equations. The von Mises stress is investigated, and maximum stress and Tsai-Wu failure criteria are applied for composite material failure, and they generally show good agreement.

Research on Key Technology of Ultra-High 3D Strengthening Heat Transfer in Plow Machining

2011 ◽  
Vol 337 ◽  
pp. 46-49
Author(s):  
Li Hua Song ◽  
Jun Yuan Kang
Keyword(s):  
Heat Transfer ◽  
High Speed ◽  
High Performance ◽  
Three Dimensional ◽  
Digital Design ◽  
Forming Process ◽  
Front Angle ◽  
Development Direction ◽  
Design And Manufacturing ◽  
Main Factors

In accordance with the latest development direction in the filed of strengthening the heat transfer technology of strengthening the heat transfer on division of strengthening heat transfer by international authoritative Professor A.E. Bergle）, including 3D(three-dimensional) heat transfer of ultra-high performance improved in the fins of the design and analysis; 3D heat transfer strengthening of the plowing process mechanism the flexibility ,high speed and high precision of gathered tools and the realization of a 3D digital design and manufacturing . It also researches on the influential law of process parameters on the formation of the fin. It is shown that the whole fin-forming process can be classified into three stages：plowing，heaving and fins forming, and that the front angle，plowing depth and the plowing speed are the main factors influencing the fin forming. Moreover，within a certain range，the height of fin increases with the front angle and the plowing depth.

scholarly journals Volumetric quantification of fluid flow reveals fish's use of hydrodynamic stealth to capture evasive prey

2014 ◽  
Vol 11 (90) ◽  
pp. 20130880 ◽  
Author(s):  
Brad J. Gemmell ◽  
Deepak Adhikari ◽  
Ellen K. Longmire
Keyword(s):  
High Speed ◽  
Prey Capture ◽  
Fluid Motion ◽  
Three Dimensional ◽  
Trophic Levels ◽  
Small Fish ◽  
Major Pathway ◽  
Image Velocimetry ◽  
Highly Sensitive ◽  
Volumetric Quantification

In aquatic ecosystems, predation on zooplankton by fish provides a major pathway for the transfer of energy to higher trophic levels. Copepods are an abundant zooplankton group that sense hydromechanical disturbances produced by approaching predators and respond with rapid escapes. Despite this capability, fish capture copepods with high success. Previous studies have focused on the predatory strike to elucidate details of this interaction. However, these raptorial strikes and resulting suction are only effective at short range. Thus, small fish must closely approach highly sensitive prey without triggering an escape in order for a strike to be successful. We use a new method, high-speed, infrared, tomographic particle image velocimetry, to investigate three-dimensional fluid patterns around predator and prey during approaches. Our results show that at least one planktivorous fish ( Danio rerio ) can control the bow wave in front of the head during the approach and consumption of prey (copepod). This alters hydrodynamic profiles at the location of the copepod such that it is below the threshold required to elicit an escape response. We find this behaviour to be mediated by the generation of suction within the buccopharyngeal cavity, where the velocity into the mouth roughly matches the forward speed of the fish. These results provide insight into how animals modulate aspects of fluid motion around their bodies to overcome escape responses and enhance prey capture.

Cranial morphology and ontogeny of the Permo-Carboniferous temnospondyl Archegosaurus decheni Goldfuss, 1847 from the Saar–Nahe Basin, Germany

2005 ◽  
Vol 96 (2) ◽  
pp. 131-162 ◽  
Author(s):  
Florian Witzmann
Keyword(s):  
Prey Capture ◽  
Three Dimensional ◽  
Nasolacrimal Duct ◽  
Larval Period ◽  
Cranial Morphology ◽  
Growth Stages ◽  
Ontogenetic Changes ◽  
Positive Allometry ◽  
Lateral Process ◽  
Different Growth Stages

ABSTRACTMorphology and ontogenetic changes in the skull and hyobranchium of the Permo-Carboniferous temnospondyl Archegosaurus decheni from the Saar–Nahe Basin (SW Germany) are described in detail, based on 181 skulls ranging from 18 to 279 mm in length. Three-dimensional skull reconstructions including the palate of different growth stages are provided. The extremely elongate choanae and up to four median symphyseal teeth are unique to A. decheni. Among neurocranial elements, the exoccipital is well ossified and forms the paroccipital process as in stereospondyls. The shaft of the stapes which projects into the squamosal embayment grows with positive allometry and possesses a distinct lateral process. The basibranchial is well ossified in adults and exhibits a complex, spoon-like morphology. Small larvae were euryphagous and used non-directed suction and jaw prehension during prey capture. Larger larvae and adults were mainly ichthyophagous, as is indicated by the increasingly elongated snout, differentiation of marginal teeth, and nutrition remains. After a prolonged larval period, juvenile and adult A. decheni remained in the aquatic habitat, as suggested by the presence of lateral line sulci, the ‘aquatic type’ of septomaxilla and choana, and the absence of a nasolacrimal duct.

scholarly journals Hydrodynamic regime drives flow reversals in suction feeding larval fishes during early ontogeny

2019 ◽  
Author(s):  
Krishnamoorthy Krishnan ◽  
Asif Shahriar Nafi ◽  
Roi Gurka ◽  
Roi Holzman
Keyword(s):  
Numerical Simulations ◽  
High Speed ◽  
Prey Capture ◽  
Sparus Aurata ◽  
Larval Fish ◽  
Fish Larvae ◽  
Numerical Models ◽  
Hydrodynamic Regime ◽  
Suction Feeding ◽  
Larval Fishes

AbstractFish larvae are the smallest self-sustaining vertebrates. As such, they face multiple challenge that stem from their minute size, and from the hydrodynamic regime in which they dwell. This regime of intermediate Reynolds numbers (Re) was shown to affect the swimming of larval fish and impede their ability to capture prey. Numerical simulations indicate that the flow fields external to the mouth in younger larvae result in shallower spatial gradients, limiting the force exerted on the prey. However, observations on feeding larvae suggest that failures in prey capture can also occur during prey transport, although the mechanism causing these failures is unclear. We combine high-speed videography and numerical simulations to investigate the hydrodynamic mechanisms that impede prey transport in larval fishes. Detailed kinematics of the expanding mouth during prey capture by larval Sparus aurata were used to parameterize age-specific numerical models of the flows inside the mouth. These models reveal that, for small larvae that slowly expand their mouth, not all the fluid that enters the mouth cavity is expelled through the gills, resulting in flow reversal at the mouth orifice. This efflux at the mouth orifice was highest in the younger ages, but was also high (>8%) in slow strikes produced by larger fish. Our modeling explains the observations of “in-and-out” events in larval fish, where prey enters the mouth but is not swallowed. It further highlights the importance of prey transport as an integral part in determining suction feeding success.

scholarly journals In vivo intraoral waterflow quantification reveals hidden mechanisms of suction feeding in fish

2021 ◽  
Author(s):  
Pauline Provini ◽  
Alexandre Brunet ◽  
Andréa Filippo ◽  
Sam Van Wassenbergh
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
New Technique ◽  
Fish Feed ◽  
Suction Feeding ◽  
Apparent Paradox ◽  
X Ray ◽  
Water Flows ◽  
Food Transport

Virtually all fish rely on flows of water to transport food to the back of their pharynx. While external flows that draw food into the mouth are well described, how intra-oral water flows manage to deposit food at the esophagus entrance remains unknown. In theory, the posteriorly moving water must, at some point, curve laterally and/or ventrally to exit through the gill slits. Such flows would eventually carry food away from the esophagus instead of towards it. This apparent paradox calls for a filtration mechanism to deviate food from the suction-feeding streamlines. To study this gap in our fundamental understanding of how fish feed, we developed and applied a new technique to quantify three-dimensional patterns of intra-oral water flows in vivo. We combined stereoscopic high-speed x-ray videos to quantify skeletal motion (XROMM) with 3D x-ray particle tracking (XPT) of approximately neutrally buoyant spheres of 1.4 mm in diameter. We showed, for carp (Cyprinus carpio) and tilapia (Oreochromis niloticus), that water tracers displayed higher curvatures than food tracers, indicating an inertia-driven filtration. In addition, tilapia also exhibited a 'central jet' flow pattern, which aids in quickly carrying food to the pharyngeal jaw region. When the food was trapped at the branchial basket, it was resuspended and carried more centrally by periodical bidirectional waterflows, synchronized with head-bone motions. By providing a complete picture of the suction-feeding process and revealing fundamental differences in food transport mechanisms among species, this new technique opens a new area of investigation to fully understand how most aquatic vertebrates feed.

scholarly journals Prey Capture Hydrodynamics in Fishes: Experimental Tests of Two Models

1983 ◽  
Vol 104 (1) ◽  
pp. 1-13 ◽  
Author(s):  
GEORGE V. LAUDER
Keyword(s):  
High Speed ◽  
Prey Capture ◽  
Regression Line ◽  
Lepomis Macrochirus ◽  
Experimental Tests ◽  
Relative Magnitude ◽  
Suction Feeding ◽  
Mouth Cavity ◽  
Large Pressure ◽  
Key Aspects

Three experimental modifications of the feeding mechanism in the bluegill sunfish (Lepomis macrochirus Rafinesque: Centrarchidae) were performed to distinguish between two alternative hydrodynamic models of the high-speed suction-feeding process in fishes. These two models make different predictions about the change in slope of the regression line representing the relationship between buccal and opercular cavity pressures, and the three experiments provide a critical test of the models. The results from all three tests unequivocally support (1) the concept of the gill bars as a resistant element within the mouth cavity functionally dividing it into buccal and opercular cavities, (2) the negligible role of lateral movement of the gill cover (operculum) in generating negative mouth cavity pressures, and (3) the large pressure differentials previously reported between the buccal and opercular cavities. Measured pressures conform neither in relative magnitude nor waveform with pressures predicted from theoretical mathematical models. Inertial effects and accelerational flows are key aspects of high-speed suction feeding.

Sign in / Sign up

Export Citation Format

Share Document