scholarly journals Synthesis of a novel aluminium salt of nitrogen-containing alkylphosphinate with high char formation to flame retard acrylonitrile–butadiene–styrene

2020 ◽  
Vol 7 (9) ◽  
pp. 200800
Author(s):  
Xue Yang ◽  
Hao Wang ◽  
Xueqing Liu ◽  
Jiyan Liu
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Infrared Spectrometry ◽  
X Ray ◽  
Ethyl Methyl ◽  
Flame Retardant Properties ◽  
The Fourier Transform ◽  
Micro Combustion Calorimeter ◽  
Combustion Calorimeter ◽  
Composition Of Products ◽  
Butadiene Styrene

A novel nitrogen-containing alkylphosphinate salt—aluminium β-(p-nitrobenzamide) ethyl methyl phosphinate (AlNP) was synthesized and used to flame retard acrylonitrile–butadiene–styrene copolymer (ABS). The Fourier transform infrared spectrometry, 1 H, 13 C and 31 P nuclear magnetic resonance and X-ray fluorescent spectroscopy (XRF) were applied to characterize the structure and composition of products. The flame retardancy performance, thermal properties and mechanical strength of the ABS/AlNP with respect to AlNP loading were investigated. AlNP was stable before 330°C and decomposed very slowly with residues high up to 56.1% at 700°C. Adding 25–30 wt% of AlNP alone can make ABS to pass V0 rating in the vertical burning tests (UL 94). The results according to the micro combustion calorimeter, thermogravimetric analysis showed that AlNP can depress the heating release and retard the thermal degradation of the ABS. Scanning electron microscopy observation of the residues from LOI test indicated that AlNP formed the condensed and tough residues layer during combustion; XRF analysis showed that the residues contained phosphorus and aluminium element and nitrogen element was not detected. The compact phosphorus/aluminium-rich substance acted as a barrier to enhance flame-retardant properties of the ABS.

scholarly journals Effect of Room Temperature Ionic Liquids for Electroless Nickel Plating on Acrylonitrile Butadiene Styrene Plastic

2019 ◽  
Vol 25 (3) ◽  
pp. 276-280
Author(s):  
Canan URAZ
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Room Temperature ◽  
Acrylonitrile Butadiene Styrene ◽  
Electroless Nickel ◽  
Room Temperature Ionic Liquids ◽  
Electroless Nickel Plating ◽  
Nickel Plating ◽  
X Ray ◽  
Butadiene Styrene

In this study, electroless nickel (EN) plating on acrylonitrile butadiene styrene (ABS) engineering plastic using room temperature ionic liquids (RTIL) was studied. Electroless plating is a fundamental step in metal plating on plastic. This step makes the plastic conductive and makes it possible to a homogeneous and hard plating without using any hazardous and unfriendly chemical such as palladium, tin, etc. In the industry there are many distinct chemical materials both catalysts and activation solutions for the electroless bath which is one of the most important parts of the process. In this study the effects of the ionic liquid, plating time, and sand paper size were investigated on electroless nickel plating. The etching and the plating processes were performed with environmentally friendly chemicals instead of the chromic and sulphuric acids used in the traditional processes. Experiments were carried out with and without ionic liquid, EMIC, 1-ethyl-3-methyl imidazolium chloride (C6H11N2Cl), and with 400, 500 and 800 grit sandpaper with the application of the sand attrition process and 70, 80, and 90 °C bath temperatures with 30, 60, and 90 minutes of deposition time. The surface morphology and the thickness of deposit analysis were performed using the Fischer scope X-Ray XDL-B System, X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). Due to the results of the experiments and analysis, the electroless nickel plating on ABS plastic was a success. The best plating was obtained at 5.010 μm as the maximum plating thickness, at 90 min of plating time and 80 °C as the plating bath temperature for electroless nickel plating on ABS plastic whit the surface activated with 800 grit sandpaper using EMIC ionic liquid. DOI: http://dx.doi.org/10.5755/j01.ms.25.3.20116

Effect of unsaturation on physicochemical properties of maleic anhydride–grafted acrylonitrile butadiene styrene terpolymer

2017 ◽  
Vol 50 (6) ◽  
pp. 520-536 ◽  
Author(s):  
Olongal Manaf ◽  
Sheeja ◽  
Ameen Jowhar ◽  
Athiyanathil Sujith
Keyword(s):  
Maleic Anhydride ◽  
Iodine Value ◽  
Flexural Modulus ◽  
Slight Modification ◽  
Acrylonitrile Butadiene Styrene ◽  
Attenuated Total Reflectance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Internal Mixer ◽  
Butadiene Styrene

In order to find out the shift of ductile nature of acrylonitrile-butadiene-styrene (ABS) polymer to brittle nature while maleic anhydride (MA) grafting, the iodine value of different MA-grafted ABS (MA-g-ABS) sampled has been determined. The iodine value of thermoplastic polymer is found by Wijs method with slight modification to overcome the poor solubility of thermoplastics in tetrachloromethane. Different samples with varying MA content were prepared using internal mixer. All the specimens were characterized by attenuated total reflectance IR spectroscopy and X-ray diffraction analysis. The iodine value measurements revealed that grafting and cross-linking evidently reduced the unsaturation in ABS polymer matrix. The grafting of MA causes the decrease in impact strength, flexural modulus, and a significant increase in crystallinity, tensile strength, yield point, and flexural strength, whereas thermal stability remains intact. Field emission scanning electron microscope images showed noticeable difference in broken surface texture between ABS and grafted samples.

Sonochemically Synthesis of Antimonite Nanoparticles and Its Influence on the Thermal Stability of the ABS Terpolymer

2013 ◽  
Vol 32 (4) ◽  
pp. 339-343 ◽  
Author(s):  
Siyamak Bagheriyan
Keyword(s):  
Thermal Stability ◽  
Acrylonitrile Butadiene Styrene ◽  
X Ray Diffraction ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
Sonochemical Reaction ◽  
Ft Ir ◽  
Higher Temperature ◽  
Thermal Stability Of ◽  
Butadiene Styrene

AbstractSb2S3 nanoparticles were synthesized via a simple sonochemical reaction between SbCl3 and thioacetamide. The effect of different parameters such as power and time of pulsation on the morphology of the product has been investigated. The Sb2 S3 nanostructures were then added to acrylonitrile-butadiene-styrene terpolymer. The effect of Sb2 S3 nanostructures on the thermal stability of the polymeric matrix has been examined. The thermal decomposition of the nanocomposite shifts towards higher temperature in the presence of the Sb2 S3 . Nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), photoluminescence (PL) spectroscopy, thermogravimetric analysis (TGA), UL-94 and limiting oxygen index (LOI) analysis.

scholarly journals Influence of Organo-Sepiolite on the Morphological, Mechanical, and Rheological Properties of PP/ABS Blends

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1493 ◽  
Author(s):  
Wang ◽  
Li ◽  
Xie ◽  
Wu ◽  
Huang ◽  
...  
Keyword(s):  
Loss Modulus ◽  
Flexural Modulus ◽  
Tensile Modulus ◽  
Acrylonitrile Butadiene Styrene ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
The Poor ◽  
Poly Acrylonitrile ◽  
Butadiene Styrene

To improve the poor impact toughness of polypropylene (PP), organo-sepiolite (O-Sep) filled 80/20 (w/w) polypropylene/poly(acrylonitrile-butadiene-styrene) (PP/ABS) nanocomposites were fabricated. The contents of O-Sep were correlated with the morphological, mechanical, and rheological behavior of PP/ABS/O-Sep blends. Scanning electron microscopy (SEM) was applied to study the morphology and thermogravimetric analysis (TGA) was applied to study the thermal stability. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) were applied to study the crystallinity. The obtained results show that O-Sep enhanced the dispersion of ABS in the PP matrix and increased the crystallinity of blends. The rheological results show that O-Sep could increase the viscosity, storage modulus, and loss modulus of blends. Moreover, the mechanical behavior shows that O-Sep (at proper content) simultaneously increased the tensile modulus, flexural modulus, and impact strength of PP/ABS/O-Sep blends.

scholarly journals Preparation of LDHs Based on Bittern and Its Flame Retardant Properties in EVA/LDHs Composites

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Long Li ◽  
Yi Qian ◽  
Peng Qiao ◽  
Haoyue Han ◽  
Haiming Zhang
Keyword(s):  
Flame Retardant ◽  
Ethylene Vinyl Acetate ◽  
Utilization Rate ◽  
Infrared Spectrometry ◽  
X Ray Diffraction ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
Cone Calorimeter Test ◽  
Flame Retardant Properties ◽  
Double Hydroxides

Bittern, as a byproduct of salt manufacture, is abundant in China. The researches and developments for seawater bittern have mainly focused on the reuse of magnesium, calcium, lithium, and boron. However, the utilization rate is less than 20%. The large amount of unused bittern has become a challenge that attracts much attention in academic and industry areas. In this paper, three kinds of layered double hydroxides (LDHs) were synthesized from bittern using a coprecipitation method and characterized by X-ray diffraction (XRD). The XRD results showed that the three kinds of LDHs(MgAl-LDHs, MgFe-LDHs and MgAlFe-LDHs) were successfully synthesized. Then, the flame retardant properties and thermal properties of the three LDHs in ethylene vinyl acetate (EVA)/LDHs composites had been tested by cone calorimeter test (CCT), limiting oxygen index (LOI), smoke density test (SDT), and thermogravimetry-Fourier transform infrared spectrometry (TG-IR). The CCT results showed that the heat release rate (HRR) of all three kinds of EVA/LDHs composites significantly decreased compared with that of pure EVA, and the EVA/MgAl-LDHs composites had the lowest PHRR value of 222.65 kW/m2. The LOI results showed that EVA/MgAl-LDHs composites had the highest LOI value of 29.8%. The SDT results indicated that MgAl-LDHs were beneficial to smoke suppression. TG-IR results showed that EVA/MgAl-LDHs composites had a better thermal stability.

scholarly journals A Practical Manner To GTR Recycling in Waste HDPE/ABS

2021 ◽  
Author(s):  
Csilla Varga ◽  
Balázs Heller ◽  
Lilla Simon-Stőger ◽  
Éva Makó
Keyword(s):  
Mechanical Properties ◽  
Maleic Anhydride ◽  
Acrylonitrile Butadiene Styrene ◽  
Mechanical Tests ◽  
X Ray Diffraction ◽  
Ground Tire Rubber ◽  
Industrial Practice ◽  
X Ray ◽  
Maleic Anhydride Copolymer ◽  
Butadiene Styrene

Abstract Waste high-density polyethylene (w-HDPE)/ acrylonitrile-butadiene-styrene (ABS)/ground tire rubber (GTR) have been melt blended by two-roll milling. Ternary blends of w-HDPE/ABS/GTR have been observed to be incompatible in the composition range studied which revealed in the deteriorated mechanical properties. Two main types of compatibilizers such as an olefin-maleic anhydride copolymer based one synthesized by the authors and a commercial maleic anhydride grafted polypropylene (MA-g-PP) have been chosen for enhancing compatibility between the components ergo the mechanical properties. For characterizing tensile and impact properties of the blends mechanical tests have been carried out besides the scanning electron microscopy (SEM), X-ray diffraction and Fourier transform infrared spectroscopy. The most advantageous result in industrial practice can be that the experimental additive allows to apply higher GTR concentration ergo gives the opportunity to recycle higher level of GTR.

Sign in / Sign up

Export Citation Format

Share Document