scholarly journals Further observations on the spectrum of the spontaneous luminous radiation of radium at ordinary temperatures

1904 ◽  
Vol 72 (477-486) ◽  
pp. 409-413 ◽  

In the plate accompanying our paper on the spectrum of the glow of radium bromide, at least seven lines are seen to agree, both in position and in intensity, with corresponding lines in the band spectrum of nitrogen. We called attention to other lines, of which some traces may be detected on the plate, and we suggested that with a longer exposure a more complete spectrum would be obtained.

1975 ◽  
Vol 53 (6) ◽  
pp. 559-573 ◽  
Author(s):  
B. Hird ◽  
K. H. Huang

The collective model of an odd neutron in an axially symmetric deformed Woods–Saxon potential, coupled to a rotating core, and containing the full RPC and pairing corrections has been used to predict the full low lying rotational band spectrum of the nuclei with N = 91 to 97. Only three adjustable parameters were used in each nucleus to fit the complete spectrum. It was possible in several nuclei to obtain the correct level sequence and in most to confirm level assignments, and the adjusted parameters were in good agreement with accepted values. However, the accuracy of this method is insufficient, in most nuclei, to provide reliable predictions for as yet unidentified bands. The lack of good overall agreements in the low lying spectra of these nuclei confirms that the core shape parameters do change from one band to another.


Author(s):  
J. Barbillat ◽  
M. Delhaye ◽  
P. Dhamelincourt

Raman mapping, with a spatial resolution close to the diffraction limit, can help to reveal the distribution of chemical species at the surface of an heterogeneous sample.As early as 1975,three methods of sample laser illumination and detector configuration have been proposed to perform Raman mapping at the microscopic level (Fig. 1),:- Point illumination:The basic design of the instrument is a classical Raman microprobe equipped with a PM tube or either a linear photodiode array or a two-dimensional CCD detector. A laser beam is focused on a very small area ,close to the diffraction limit.In order to explore the whole surface of the sample,the specimen is moved sequentially beneath the microscope by means of a motorized XY stage. For each point analyzed, a complete spectrum is obtained from which spectral information of interest is extracted for Raman image reconstruction.- Line illuminationA narrow laser line is focused onto the sample either by a cylindrical lens or by a scanning device and is optically conjugated with the entrance slit of the stigmatic spectrograph.


2011 ◽  
Vol 30 (11) ◽  
pp. 2638-2641
Author(s):  
Dong Chen ◽  
Jian-dong Li ◽  
Ji-yong Pang ◽  
Jing Ma

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 476
Author(s):  
Umer Farooq ◽  
Adnan Iftikhar ◽  
Muhammad Farhan Shafique ◽  
Muhammad Saeed Khan ◽  
Adnan Fida ◽  
...  

This paper presents a highly compact frequency-selective surface (FSS) that has the potential to switch between the X-band (8 GHz–12 GHz) and C-band (4 GHz–8 GHz) for RF shielding applications. The proposed FSS is composed of a square conducting loop with inward-extended arms loaded with curved extensions. The symmetric geometry allows the RF shield to perform equally for transverse electric (TE), transverse magnetic (TM), and 45° polarizations. The unit cell has a dimension of 0.176 λ0 and has excellent angular stability up to 60°. The resonance mechanism was investigated using equivalent circuit models of the shield. The design of the unit element allowed incorporation of PIN diodes between adjacent elements for switching to a lower C-band spectrum at 6.6 GHz. The biasing network is on the bottom layer of the substrate to avoid effects on the shielding performance. A PIN diode configuration for the switching operation was also proposed. In simulations, the PIN diode model was incorporated to observe the switchable operation. Two prototypes were fabricated, and the switchable operation was demonstrated by etching copper strips on one fabricated prototype between adjacent unit cells (in lieu of PIN diodes) as a proof of the design prototypes. Comparisons among the results confirmed that the design offers high angular stability and excellent performance in both bands.


1982 ◽  
Vol 25 (5) ◽  
pp. 2837-2840 ◽  
Author(s):  
A. Partensky ◽  
C. Quesne

1989 ◽  
Vol 37 (5) ◽  
pp. 868-874 ◽  
Author(s):  
T. Rozzi ◽  
J.S. Kot
Keyword(s):  

The spectrum of the flame of carbon monoxide burning in air and in oxygen at reduced pressure has been photographed on plates of high contrast which display the band spectrum clearly above the continuous background. Greater detail has been obtained than has been recorded previously and new measurements are given. The structure of the spectrum has been studied systematically. It is shown that the bands occur in pairs with a separation of about 60 cm. -1 , this separation being due probably to the rotational structure. Various wave-number differences are found to occur frequently, and many of the strong bands are arranged in arrays using intervals of 565 and 2065 cm. -1 . The possible origin of the spectrum is discussed. The choice of emitter is limited to a polyatomic oxide of carbon, of which carbon dioxide is the most likely. The spectrum of the suboxide C 3 O 2 shows some resemblance to the flame bands, but this molecule is improbable as the emitter on other grounds. A peroxide C0 3 is also a possibility, but no evidence for the presence of this has been obtained from experiments on the slow combustion of carbon monoxide. Carbon dioxide in gaseous or liquid form is transparent through the visible and quartz ultra-violet, and the flame bands are not obtained from CO 2 in discharge tubes. Comparison with the Schumann-Runge bands of oxygen shows that it is possible that the flame bands may form part of the absorption band system of CO 2 which is known to exist below 1700 A if there is a big change in shape or size of the molecule in the two electronic states. The electronic energy levels of CO 2 are discussed. Since normal CO 2 is not built up from normal CO and oxygen, an electronic rearrangement of the CO 2 must occur after the combustion process. Mulliken has suggested that the molecule in the first excited electronic state, corresponding to absorption below 1700 A, may have a triangular form. The frequencies obtained from the flame bands are compared with the infra-red frequencies of CO 2 . The 565 interval may be identified with the transverse vibration v 2 , indicating that the excited electronic state is probably triangular in shape. The 2065 interval cannot, however, be identified with the asymmetric vibration v 3 with any certainty. If the excited electronic state of CO 2 is triangular, then molecules formed during the combustion by transitions from this level to the ground state may be “vibrationally activated”. This is probably the reason for many of the peculiarities of the combustion of carbon monoxide.


2003 ◽  
Vol 478 ◽  
pp. 1-10 ◽  
Author(s):  
KRISTIAN B. DYSTHE ◽  
KARSTEN TRULSEN ◽  
HARALD E. KROGSTAD ◽  
HERVÉ SOCQUET-JUGLARD

Numerical simulations of the evolution of gravity wave spectra of fairly narrow bandwidth have been performed both for two and three dimensions. Simulations using the nonlinear Schrödinger (NLS) equation approximately verify the stability criteria of Alber (1978) in the two-dimensional but not in the three-dimensional case. Using a modified NLS equation (Trulsen et al. 2000) the spectra ‘relax’ towards a quasi-stationary state on a timescale (ε2ω0)−1. In this state the low-frequency face is steepened and the spectral peak is downshifted. The three-dimensional simulations show a power-law behaviour ω−4 on the high-frequency side of the (angularly integrated) spectrum.


Sign in / Sign up

Export Citation Format

Share Document