Performance evaluation of the point-of-care SAMBA II SARS-CoV-2 Test for detection of SARS-CoV-2

AbstractNucleic acid amplification for the detection of SARS-CoV-2 RNA in respiratory samples is the standard method for diagnosis. These tests are centralised and therefore turnaround times can be 2-5 days. Point-of-care testing with rapid turnaround times would allow more effective triage in settings where patient management and infection control decisions need to be made rapidly.Inclusivity and specificity of the SAMBA II SARS-CoV-2 assay was determined by in silico analyses of the primers and probes. Analytical and clinical sensitivity and specificity of the SAMBA II SARS-CoV-2 Test was evaluated for analytical sensitivity and specificity. Clinical performance was evaluated in residual clinical samples compared to the Public Health England reference tests.The limit of detection of the SAMBA II SARS-CoV-2 Test is 250 cp/mL and is specific for detection of 2 regions of the SARS-CoV-2 genome. The clinical sensitivity was evaluated in 172 clinical samples provided by the Clinical Microbiology and Public Health Laboratory, Addenbrooke’s Hospital, Cambridge (CMPHL), which showed a sensitivity of 98.9% (95% CI 94.03-99.97%), specificity of 100% (95% CI 95.55-100%), PPV of 100% and NPV of 98.78% (92.02-99.82%) compared to testing by CMPHLSAMBA detected 3 positive samples that were initially negative by PHE Test. The data shows that the SAMBA II SARS-CoV-2 Test performs equivalently to the centralised testing methods with a much quicker turnaround time. Point of care testing, such as SAMBA, should enable rapid patient management and effective implementation of infection control measures.

Download Full-text

Performance Evaluation of the SAMBA II SARS-CoV-2 Test for Point-of-Care Detection of SARS-CoV-2

Journal of Clinical Microbiology ◽

10.1128/jcm.01262-20 ◽

2020 ◽

Vol 59 (1) ◽

pp. e01262-20 ◽

Cited By ~ 1

Author(s):

Sonny M. Assennato ◽

Allyson V. Ritchie ◽

Cesar Nadala ◽

Neha Goel ◽

Cuijuan Tie ◽

...

Keyword(s):

Public Health ◽

Infection Control ◽

Patient Management ◽

Clinical Performance ◽

Point Of Care ◽

Turnaround Time ◽

Control Measures ◽

Nucleic Acid Amplification ◽

Analytical Sensitivity ◽

Percent Agreement

ABSTRACTNucleic acid amplification for the detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA in respiratory samples is the standard method for diagnosis. The majority of this testing is centralized and therefore has turnaround times of several days. Point-of-care (POC) testing with rapid turnaround times would allow more effective triage in settings where patient management and infection control decisions need to be made rapidly. The inclusivity and specificity of the Simple AMplification-Based Assay (SAMBA) II SARS-CoV-2 test were determined by both in silico analyses of the primers and probes and wet testing. The SAMBA II SARS-CoV-2 test was evaluated for performance characteristics. Clinical performance was evaluated in residual combined throat/nose swabs and compared to that of the Public Health England real-time PCR assay targeting the RdRp gene. The SAMBA II SARS-CoV-2 test has an analytical sensitivity of 250 copies/ml for detecting two regions of the genome (open reading frame 1ab [ORF1ab] and nucleocapsid protein [N]). The clinical performance was evaluated in 172 residual combined nose/throat swabs provided by the Clinical Microbiology and Public Health Laboratory, Addenbrooke’s Hospital, Cambridge (CMPHL), which showed an estimated positive percent agreement of 98.9% (95% confidence interval [CI], 93.83 to 99.97) and negative percent agreement of 96.4% (95% CI, 89.92 to 99.26) compared to testing by the CMPHL. The data show that the SAMBA II SARS-CoV-2 test performs equivalently to the centralized testing methods, but with a shorter turnaround time of 86 to 101 min. Point-of-care tests such as SAMBA should enable rapid patient management and effective implementation of infection control measures.

Download Full-text

OC 8173 RAPID DETECTION OF MYCOBACTERIUM ULCERANS BY RECOMBINASE POLYMERASE AMPLIFICATION

BMJ Global Health ◽

10.1136/bmjgh-2019-edc.2 ◽

2019 ◽

Vol 4 (Suppl 3) ◽

pp. A2.1-A2

Author(s):

Michael Frimpong ◽

Hubert Ahor ◽

Francisca Sarpong ◽

Ken Laing ◽

Mark Wansbrough-Jones ◽

...

Keyword(s):

Sensitivity And Specificity ◽

Point Of Care ◽

Clinical Signs ◽

Buruli Ulcer ◽

Cross Reactivity ◽

Current Control ◽

Mycobacterium Ulcerans ◽

Recombinase Polymerase Amplification ◽

Clinical Samples ◽

Clinical Sensitivity

BackgroundThere are no primary measures to prevent people from contracting Buruli ulcer, mainly due to poor understanding of its epidemiology. The current control strategy emphasises early diagnosis and prompt treatment, with the goal of avoiding the complications associated with advanced stages of the disease. There is no diagnostic test for the disease appropriate for use at the primary health care level where most cases are detected and treated. Diagnosis based on clinical signs is unreliable in inexperienced hands and complicated by infections that have similar presentations. This study was to develop and evaluate the use of recombinase polymerase amplification (RPA) assay for the detection of Mycobacterium ulcerans at the point of patient care.MethodsA specific fragment of IS2404 of M. ulcerans was amplified in 15 min at a constant temperature of 42°C, using the RPA assay and analysed on a portable fluorometre. Themethod was tested for sensitivity and specificity with molecular standard of IS2404 DNA fragment, various M.ulcerans strains, other mycobacteria and environmentally associated bacteria. Additionally, the assay performance as a diagnostic tool was tested with archived DNA from symptomatic patients. All results were compared with that of a highly sensitive IS2404 PCR.ResultsThe detection limit was 50 copies of IS2404 in 15 min using plasmid standard and 125 fg with genomic Mu DNA equivalent 25 genomic copies. The assay was highly specific in detecting all strains of M. ulcerans with no observed cross reactivity with other mycobacteria and common skin colonising bacteria. The clinical sensitivity and specificity of the BU-RPA assay using clinical samples was 86% and 100% respectively.ConclusionWe have developed a real-time isothermal RPA assay for the detection of M. ulcerans as a cheaper alternative to PCR. Combining this assay with a simple extraction protocol will maximise its use as point-of-care test for Buruli ulcer.

Download Full-text

Evaluation of accuracy, exclusivity, limit-of-detection and ease-of-use of LumiraDx™ - Antigen-detecting point-of-care device for SARS-CoV-2

10.1101/2021.03.02.21252430 ◽

2021 ◽

Author(s):

Lisa Johanna Krüger ◽

Julian A.F. Klein ◽

Frank Tobian ◽

Mary Gaeddert ◽

Federica Lainati ◽

...

Keyword(s):

Viral Load ◽

Limit Of Detection ◽

Point Of Care ◽

Scale Up ◽

Cross Reactivity ◽

Ease Of Use ◽

Analytical Sensitivity ◽

Rt Pcr ◽

Clinical Sensitivity ◽

Lateral Flow Assays

Background: Rapid antigen-detecting tests (Ag-RDTs) for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can transform pandemic control. Thus far, sensitivity (≤85%) of lateral-flow assays has limited scale-up. Conceivably, microfluidic immunofluorescence Ag-RDTs could increase sensitivity for SARS-CoV-2 detection. Materials and Methods: This multi-centre diagnostic accuracy study investigated performance of the microfluidic immunofluorescence LumiraDx™ assay, enrolling symptomatic and asymptomatic participants with suspected SARS-CoV-2 infection. Participants collected a supervised nasal mid-turbinate (NMT) self-swab for Ag-RDT testing, in addition to a professionally-collected nasopharyngeal (NP) swab for routine testing with reverse transcriptase polymerase chain reaction (RT-PCR). Results were compared to calculate sensitivity and specificity. Sub-analyses investigated the results by viral load, symptom presence and duration. An analytical study assessed exclusivity and limit-of-detection (LOD). In addition, we evaluated ease-of-use. Results: Study conduct was between November 2nd 2020 and January 21st 2021. 761 participants were enrolled, with 486 participants reporting symptoms on testing day. 120 out of 146 RT-PCR positive cases were detected positive by LumiraDx™, resulting in a sensitivity of 82.2% (95% CI: 75.2%-87.5%). Specificity was 99.3% (CI: 98.3-99.7%). Sensitivity was increased in individuals with viral load ≥ 7 log10 SARS-CoV2 RNA copies/ml (93.8%; CI: 86.2%-97.3%). Testing against common respiratory commensals and pathogens showed no cross-reactivity and LOD was estimated to be 2-56 PFU/mL. The ease-of-use-assessment was favourable for lower throughput settings. Conclusion: The LumiraDx™ assay showed excellent analytical sensitivity, exclusivity and clinical specificity with good clinical sensitivity using supervised NMT self-sampling.

Download Full-text

Clinical Validation of Automated and Rapid mariPOC SARS-CoV-2 Antigen Test

10.1101/2021.02.08.21250086 ◽

2021 ◽

Author(s):

Juha M. Koskinen ◽

Petri Antikainen ◽

Kristina Hotakainen ◽

Anu Haveri ◽

Niina Ikonen ◽

...

Keyword(s):

Sensitivity And Specificity ◽

Limit Of Detection ◽

Clinical Performance ◽

High Capacity ◽

Nasopharyngeal Swab ◽

Analytical Sensitivity ◽

Clinical Sensitivity ◽

Qrt Pcr ◽

Antigen Tests ◽

Novel Coronavirus

ABSTRACTNovel SARS coronavirus causing COVID-19 was recognized in late 2019. Diagnostics was quickly ramped up worldwide based on the detection of viral RNA. Based on the scientific knowledge for pre-existing coronaviruses, it was expected that the RNA of this novel coronavirus will be detected at significant rates from symptomatic and asymptomatic individuals due to existence of non-infectious RNA. To increase the efficacy of diagnostics, surveillance, screening and pandemic control, rapid methods, such as antigen tests, are needed for decentralized testing and to assess infectiousness. The objectives were to verify analytical sensitivity and specificity, and assess the clinical sensitivity, specificity and usability of a novel automated mariPOC SARS-CoV-2 test based on sophisticated optical laser technology detecting viral structure proteins. Analytical performance was verified using bacterial and viral preparations. Clinical performance of the test was evaluated against qRT-PCR in a retrospective study with nasopharyngeal swab specimens (N=211) collected from symptomatic patients suspected of acute SARS-CoV-2 infections. Sensitivity and specificity of the mariPOC test were 92.3% (12/13) and 100.0% (198/198), respectively. The test’s limit of detection was 22 PFU/test and it had no cross-reactions with the tested respiratory microbes. Our study shows that the mariPOC can detect infectious individuals already in 20 minutes while clinical sensitivity close to qRT-PCR is achieved in two hours or less. The test targets conserved epitopes of SARS-CoV-2 nucleoprotein, making it robust against strain variations. The new test is a promising and versatile tool for syndromic testing of symptomatic cases and for high capacity infection control screening.

Download Full-text

Evaluation of accuracy, exclusivity, limit-of-detection and ease-of-use of LumiraDx™: An antigen-detecting point-of-care device for SARS-CoV-2

Infection ◽

10.1007/s15010-021-01681-y ◽

2021 ◽

Author(s):

Lisa J. Krüger ◽

Julian A. F. Klein ◽

Frank Tobian ◽

Mary Gaeddert ◽

Federica Lainati ◽

...

Keyword(s):

Viral Load ◽

Limit Of Detection ◽

Point Of Care ◽

Scale Up ◽

Cross Reactivity ◽

Ease Of Use ◽

Analytical Sensitivity ◽

Rt Pcr ◽

Clinical Sensitivity ◽

Lateral Flow Assays

Abstract Purpose Rapid antigen-detecting tests (Ag-RDTs) for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can transform pandemic control. Thus far, sensitivity (≤ 85%) of lateral-flow assays has limited scale-up. Conceivably, microfluidic immunofluorescence Ag-RDTs could increase sensitivity for SARS-CoV-2 detection. Methods This multi-centre diagnostic accuracy study investigated performance of the microfluidic immunofluorescence LumiraDx™ assay, enrolling symptomatic and asymptomatic participants with suspected SARS-CoV-2 infection. Participants collected a supervised nasal mid-turbinate (NMT) self-swab for Ag-RDT testing, in addition to a professionally collected nasopharyngeal (NP) swab for routine testing with reverse transcriptase polymerase chain reaction (RT-PCR). Results were compared to calculate sensitivity and specificity. Sub-analyses investigated the results by viral load, symptom presence and duration. An analytical study assessed exclusivity and limit-of-detection (LOD). In addition, we evaluated ease-of-use. Results The study was conducted between November 2nd 2020 and 4th of December 2020. 761 participants were enrolled, with 486 participants reporting symptoms on testing day. 120 out of 146 RT-PCR positive cases were detected positive by LumiraDx™, resulting in a sensitivity of 82.2% (95% CI 75.2–87.5%). Specificity was 99.3% (CI 98.3–99.7%). Sensitivity was increased in individuals with viral load ≥ 7 log10 SARS-CoV2 RNA copies/ml (93.8%; CI 86.2–97.3%). Testing against common respiratory commensals and pathogens showed no cross-reactivity and LOD was estimated to be 2–56 PFU/mL. The ease-of-use-assessment was favourable for lower throughput settings. Conclusion The LumiraDx™ assay showed excellent analytical sensitivity, exclusivity and clinical specificity with good clinical sensitivity using supervised NMT self-sampling. Trial registration number and registration date DRKS00021220 and 01.04.2020

Download Full-text

A saliva-based RNA extraction-free workflow integrated with Cas13a for SARS-CoV-2 detection

10.1101/2020.11.07.20227082 ◽

2020 ◽

Author(s):

Iqbal Azmi ◽

Md Imam Faizan ◽

Rohit Kumar ◽

Siddharth Raj Yadav ◽

Nisha Chaudhary ◽

...

Keyword(s):

Data Storage ◽

Limit Of Detection ◽

Rna Extraction ◽

Smartphone Application ◽

Lateral Flow ◽

Clinical Samples ◽

Heat Inactivation ◽

Analytical Sensitivity ◽

Test Results ◽

Clinical Sensitivity

A major bottleneck in scaling-up COVID-19 testing is the need for sophisticated instruments and well-trained healthcare professionals, which are already overwhelmed due to the pandemic. Moreover, the high-sensitive SARS-CoV-2 diagnostics are contingent on an RNA extraction step, which, in turn, is restricted by constraints in the supply chain. Here, we present CASSPIT (Cas13 Assisted Saliva-based & Smartphone Integrated Testing), which will allow direct use of saliva samples without the need for RNA extraction for SARS-CoV-2 detection. CASSPIT utilizes CRISPR-Cas13a based SARS-CoV-2 RNA detection, and lateral-flow assay (LFA) readout of the test results. The sample preparation workflow includes an optimized chemical treatment and heat inactivation method, which, when applied to 94 COVID-19 clinical samples, showed a 97% positive agreement with the RNA extraction method. With CASSPIT, LFA based visual limit of detection (LoD) for a given SARS-CoV-2 RNA spiked into the saliva samples was ∼200 copies; image analysis-based quantification further improved the analytical sensitivity to ∼100 copies. Upon validation of clinical sensitivity on RNA extraction-free saliva samples (n=76), a 98% agreement between the lateral-flow readout and RT-qPCR data was found. To enable user-friendly test results with provision for data storage and online consultation, we subsequently integrated lateral-flow strips with a smartphone application. We believe CASSPIT will eliminate our reliance on RT-qPCR by providing comparable sensitivity and will be a step toward establishing nucleic acid-based point-of-care (POC) testing for COVID-19.

Download Full-text

PERFORMANCE CHARACTERISTICS OF A FRET-BASED IMMUNOASSAY FOR QUANTITATION OF INFLIXIMAB ON A POINT-OF-CARE INSTRUMENT SYSTEM

Inflammatory Bowel Diseases ◽

10.1093/ibd/izaa347.135 ◽

2021 ◽

Vol 27 (Supplement_1) ◽

pp. S57-S57

Author(s):

Edgar Ong ◽

Ruo Huang ◽

Richard Kirkland ◽

Michael Hale ◽

Larry Mimms

Keyword(s):

Whole Blood ◽

Limit Of Detection ◽

Point Of Care ◽

Quantitative Detection ◽

Therapeutic Drug ◽

Analytical Sensitivity ◽

Sample Type ◽

Hook Effect ◽

Limit Of Quantitation ◽

Assay Precision

Abstract Introduction A fast (<5 min), time-resolved fluorescence resonance energy transfer (FRET)-based immunoassay was developed for the quantitative detection of infliximab (IFX) and biosimilars for use in therapeutic drug monitoring using only 20 µL of fingerstick whole blood or serum at the point-of-care. The Procise IFX assay and ProciseDx analyzer are CE-marked. Studies were performed to characterize analytical performance of the Procise IFX assay on the ProciseDx analyzer. Methods Analytical testing was performed by spiking known amounts of IFX into negative serum and whole blood specimens. Analytical sensitivity was determined using limiting concentrations of IFX. Linearity was determined by testing IFX across the assay range. Hook effect was assessed at IFX concentrations beyond levels expected to be found within a patient. Testing of assay precision, cross-reactivity and potential interfering substances, and biosimilars was performed. The Procise IFX assay was also compared head-to-head with another CE-marked assay: LISA-TRACKER infliximab ELISA test (Theradiag, France). The accuracy of the Procise IFX assay is established through calibrators and controls traceable to the WHO 1st International Standard for Infliximab (NIBSC code: 16/170). Results The Procise IFX assay shows a Limit of Blank, Limit of Detection, and Lower Limit of Quantitation (LLoQ) of 0.1, 0.2, and 1.1 µg/mL in serum and 0.6, 1.1, and 1.7 µg/mL in whole blood, respectively. The linear assay range was determined to be 1.7 to 77.2 µg/mL in serum and whole blood. No hook effect was observed at an IFX concentration of 200 µg/mL as the value reported as “>ULoQ”. Assay precision testing across 20 days with multiple runs and reagent lots showed an intra-assay coefficient of variation (CV) of 2.7%, an inter-assay CV of <2%, and a total CV of 3.4%. The presence of potentially interfering/cross-reacting substances showed minimal impact on assay specificity with %bias within ±8% of control. Testing of biosimilars (infliximab-dyyb and infliximab-abda) showed good recovery. A good correlation to the Theradiag infliximab ELISA was obtained for both serum (slope=1.01; r=0.99) and whole blood (slope=1.01; r=0.98) samples (Figure 1). Conclusion Results indicate that the Procise IFX assay is sensitive, specific, and precise yielding results within 5 minutes from both whole blood and serum without the operator needing to specify sample type. Additionally, it shows very good correlation to a comparator assay that takes several hours and sample manipulation to yield results. This makes the Procise IFX assay ideal for obtaining fast and accurate IFX quantitation, thus allowing for immediate drug level dosing decisions to be made by the physician during patient treatment.

Download Full-text

A Smartphone Camera Colorimetric Assay of Acetylcholinesterase and Butyrylcholinesterase Activity

Sensors ◽

10.3390/s21051796 ◽

2021 ◽

Vol 21 (5) ◽

pp. 1796

Author(s):

Miroslav Pohanka ◽

Jitka Zakova

Keyword(s):

Limit Of Detection ◽

Colorimetric Assay ◽

Point Of Care ◽

Specific Treatment ◽

Point Of Care Testing ◽

Analytical Instruments ◽

Colorimetric Test ◽

3D Printed ◽

Butyrylcholinesterase Activity ◽

Additional Education

Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) can serve as biochemical markers of various pathologies like liver disfunction and poisonings by nerve agents. Ellman’s assay is the standard spectrophotometric method to measure cholinesterase activity in clinical laboratories. The authors present a new colorimetric test to assess AChE and BChE activity in biological samples using chromogenic reagents, treated 3D-printed measuring pads and a smartphone camera as a signal detector. Multiwell pads treated with reagent substrates 2,6-dichlorophenolindophenyl acetate, indoxylacetate, ethoxyresorufin and methoxyresorufin were prepared and tested for AChE and BChE. In the experiments, 3D-printed pads containing indoxylacetate as a chromogenic substrate were optimal for analytical purposes. The best results were achieved using the red (R) channel, where the limit of detection was 4.05 µkat/mL for BChE and 4.38 µkat/mL for AChE using a 40 µL sample and a 60 min assay. The major advantage of this method is its overall simplicity, as samples are applied directly without any specific treatment or added reagents. The assay was also validated to the standard Ellman’s assay using human plasma samples. In conclusion, this smartphone camera-based colorimetric assay appears to have practical applicability and to be a suitable method for point-of-care testing because it does not require specific manipulation, additional education of staff or use of sophisticated analytical instruments.

Download Full-text

Direct diagnostic testing of SARS-CoV-2 without the need for prior RNA extraction

Scientific Reports ◽

10.1038/s41598-021-81487-y ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Shan Wei ◽

Esther Kohl ◽

Alexandre Djandji ◽

Stephanie Morgan ◽

Susan Whittier ◽

...

Keyword(s):

Limit Of Detection ◽

Point Of Care ◽

Diagnostic Testing ◽

Rna Extraction ◽

Cost Effective ◽

Clinical Samples ◽

Nasopharyngeal Swab ◽

Percentage Agreement ◽

Testing Method ◽

Viral Transport

AbstractThe COVID-19 pandemic has resulted in an urgent need for a rapid, point of care diagnostic testing that could be rapidly scaled on a worldwide level. We developed and tested a highly sensitive and robust assay based on reverse transcription loop mediated isothermal amplification (RT-LAMP) that uses readily available reagents and a simple heat block using contrived spike-in and actual clinical samples. RT-LAMP testing on RNA-spiked samples showed a limit of detection (LoD) of 2.5 copies/μl of viral transport media. RT-LAMP testing directly on clinical nasopharyngeal swab samples in viral transport media had an 85% positive percentage agreement (PPA) (17/20), and 100% negative percentage agreement (NPV) and delivered results in 30 min. Our optimized RT-LAMP based testing method is a scalable system that is sufficiently sensitive and robust to test for SARS-CoV-2 directly on clinical nasopharyngeal swab samples in viral transport media in 30 min at the point of care without the need for specialized or proprietary equipment or reagents. This cost-effective and efficient one-step testing method can be readily available for COVID-19 testing world-wide, especially in resource poor settings.

Download Full-text

Wave-shaped microfluidic chip assisted point-of-care testing for accurate and rapid diagnosis of infections

10.21203/rs.3.rs-829274/v1 ◽

2021 ◽

Author(s):

Binfeng Yin ◽

Xinhua Wan ◽

Mingzhu Yang ◽

Changcheng Qian ◽

A S M Muhtasim Fuad Sohan

Keyword(s):

Microfluidic Chip ◽

Limit Of Detection ◽

Point Of Care ◽

Simultaneous Detection ◽

Accurate Diagnosis ◽

Point Of Care Testing ◽

Promising Alternative ◽

Reactive Protein ◽

Linear Relationships ◽

Multiple Biomarkers

Abstract Background: Simultaneous and timely detection of C-reactive protein (CRP), procalcitonin (PCT), and interleukin-6 (IL-6) provides effective information for the accurate diagnosis of infections. Early diagnosis and classification of infections increase the cure rate while decreasing complications, which is significant for severe infections, especially for war surgery. However, traditional methods rely on laborious operations and bulky devices. On the other hand, point-of-care (POC) methods suffer from limited robustness and accuracy. Therefore, it is of urgent demand to develop POC devices for rapid and accurate diagnosis of infections to fulfill on-site militarized requirements.Methods: We developed a wave-shaped microfluidic chip (WMC) assisted multiplexed detection platform (WMC-MDP). WMC-MDP reduces detection time and improves repeatability through premixing of the samples and reaction of the reagents. We further combined the detection platform with the streptavidin-biotin (SA-B) amplified system to enhance the sensitivity while using chemiluminescence (CL) intensity as signal readout. We realized simultaneous detection of CRP, PCT, and IL-6 on the detection platform and evaluated the sensitivity, linear range, selectivity, and repeatability. Finally, we finished detecting 15 samples from volunteers and compared the results with commercial ELISA kits.Results: Detection of CRP, PCT, and IL-6 exhibited good linear relationships between CL intensities and concentrations in the range of 1.25-40 μg/mL, 0.4-12.8 ng/mL, and 50-1600 pg/mL. The limit of detection (LOD) of CRP, PCT, and IL-6 were 0.54 μg/mL, 0.11 ng/mL, and 16.25 pg/mL, respectively. WMC-MDP is capable of good adequate selectivity and repeatability. The whole detection procedure takes only 22 minutes that meets the requirements of a POC device. Results of 15 samples from volunteers were consistent with the results detected by commercial ELISA kits.Conclusion: WMC-MDP allows simultaneous, rapid, and sensitive detection of CRP, PCT, and IL-6 with satisfactory selectivity and repeatability, requiring minimal manipulation. However, WMC-MDP takes advantage of being a microfluidic device showing the coefficients of variation less than 10% enabling WMC-MDP to be a type of POCT. Therefore, WMC-MDP provides a promising alternative to point-of-care testing (POCT) of multiple biomarkers. We believe the practical application of WMC-MDP in militarized fields will revolutionize infection diagnosis for soldiers.

Download Full-text