scholarly journals Development of a saliva-optimized RT-LAMP assay for SARS-CoV-2

Author(s):  
Albert Dayuan Yu ◽  
Kristina Galatsis ◽  
Jian Zheng ◽  
Jasmine Quynh Le ◽  
Dingbang Ma ◽  
...  

AbstractConventional reverse transcription quantitative polymerase chain reaction (RT-qPCR) technology has struggled to fulfill the unprecedented need for diagnostic testing created by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. Complexity and cost hinder access to testing, and long turnaround-time decreases its utility. To ameliorate these issues, we focus on saliva and introduce several advances to colorimetric reverse-transcription loop-mediated isothermal amplification (RT-LAMP) technology; RT-LAMP offers a minimal equipment alternative to RT-qPCR. First, we validated the use of the novel dye LAMPShade Violet (LSV), which improves the visual clarity and contrast of the colorimetric readout. Second, we compared different inactivation conditions on infectivity and RNA yield from saliva. Third, we developed a ten-minute RNA purification protocol from saliva. We call this magnetic bead protocol SalivaBeads. Finally, we developed a magnetic stick, StickLAMP, which provides reliable bead-based RNA purification as well as simple and low-cost access to scalable testing from saliva.

2022 ◽  
Vol 50 (1) ◽  
Author(s):  
Meng Yee Lai ◽  
Jeyanthi Suppiah ◽  
Ravindran Thayan ◽  
Ilyiana Ismail ◽  
Nur Izati Mustapa ◽  
...  

Abstract Background Current diagnosis of SARS-CoV-2 infection relies on RNA purification prior to amplification. Typical extraction methods limit the processing speed and turnaround time for SARS-CoV-2 diagnostic testing. Methods Here, we applied reverse transcription loop-mediated isothermal amplification directly onto human clinical swabs samples to amplify the RNA from SARS-CoV-2 swab samples after processing with chelating resin. Results By testing our method on 64 samples, we managed to develop an RT-LAMP assay with 95.9% sensitivity (95% CI 86 to 99.5%) and 100% specificity (95% CI 78.2–100%). Conclusion The entire process including sample processing can be completed in approximately 50 min. This method has promising potential to be applied as a fast, simple and inexpensive diagnostic tool for the detection of SARS-CoV-2.


Author(s):  
Carlos dos Santos ◽  
Kézia de Oliveira ◽  
Geovana Mendes ◽  
Lívia Silva ◽  
Marcio de Souza Jr. ◽  
...  

The coronavirus pandemic has been causing damage to many nations, as public and private health systems deteriorate by the increasing demand. Some infected patients have culturable severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) even though not presenting any symptoms, and therefore, are probably able to transmit it. Correctly diagnosing and isolating infected patients is an important step towards preventing new infections. Current diagnostic methods rely mainly on reverse transcription quantitative polymerase chain reaction (RT-qPCR). Methods such as reverse transcription loop-mediated isothermal amplification (RT-LAMP) have risen as viable alternatives, as they are cheaper and require less infrastructure, they have the potential to be applied in low-resource scenarios and even at point-of-care. Here we report a colorimetric RT‑LAMP assay capable of detecting SARS-CoV-2 in ribonucleic acid (RNA) from saliva. In some cases, the test was able to detect viral RNA before symptom onset and even in a self-reported asymptomatic carrier. It had a limit of detection of 300 copies per reaction and showed a sensitivity of 80%, a specificity of 100%, a general accuracy of 99.59%, and a Cohen’s kappa of 0.887. The possibility of detecting positive cases even before the clinical manifestation shows great potential and can contribute to controlling the pandemic.


2020 ◽  
Vol 7 (Supplement_1) ◽  
pp. S296-S297
Author(s):  
Trini A Mathew ◽  
Jonathan Hopkins ◽  
Diane Kamerer ◽  
Shagufta N Ali ◽  
Daniel Ortiz ◽  
...  

Abstract Background The novel Coronavirus SARS CoV-2 (COVID-19) outbreak was complicated by the lack of diagnostic testing kits. In early March 2020, leadership at Beaumont Hospital, Royal Oak Michigan (Beaumont) identified the need to develop high capacity testing modalities with appropriate sensitivity and specificity and rapid turnaround time. We describe the molecular diagnostic testing experience since initial rollout on March 16, 2020 at Beaumont, and results of repeat testing during the peak of the COVID-19 pandemic in MI. Methods Beaumont is an 1100 bed hospital in Southeast MI. In March, testing was initially performed with the EUA Luminex NxTAG CoV Extended Panel until March 28, 2020 when testing was converted to the EUA Cepheid Xpert Xpress SARS-CoV-2 for quicker turnaround times. Each assay was validated with a combination of patient samples and contrived specimens. Results During the initial week of testing there was > 20 % specimen positivity. As the prevalence grew the positivity rate reached 68% by the end of March (Figure 1). Many state and hospital initiatives were implemented during the outbreak, including social distancing and screening of asymptomatic patients to increase case-finding and prevent transmission. We also adopted a process for clinical review of symptomatic patients who initially tested negative for SARS-CoV-2 by a group of infectious disease physicians (Figure 2). This process was expanded to include other trained clinicians who were redeployed from other departments in the hospital. Repeat testing was performed to allow consideration of discontinuation of isolation precautions. During the surge of community cases from March 16 to April 30, 2020, we identified patients with negative PCR tests who subsequently had repeat testing based on clinical evaluation, with 7.1% (39/551) returning positive for SARS- CoV2. Of the patients who expired due to COVID-19 during this period, 4.3% (9/206) initially tested negative before ultimately testing positive. Figure 1 BH RO testing Epicurve Figure 2: Screening tool for repeat COVID19 testing and precautions Conclusion Many state and hospital initiatives helped us flatten the curve for COVID-19. Our hospital testing experience indicate that repeat testing may be warranted for those patients with clinical features suggestive of COVID-19. We will further analyze these cases and clinical features that prompted repeat testing. Disclosures All Authors: No reported disclosures


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Severino Jefferson Ribeiro da Silva ◽  
Keith Pardee ◽  
Udeni B. R. Balasuriya ◽  
Lindomar Pena

AbstractWe have previously developed and validated a one-step assay based on reverse transcription loop-mediated isothermal amplification (RT-LAMP) for rapid detection of the Zika virus (ZIKV) from mosquito samples. Patient diagnosis of ZIKV is currently carried out in centralized laboratories using the reverse transcription-quantitative polymerase chain reaction (RT-qPCR), which, while the gold standard molecular method, has several drawbacks for use in remote and low-resource settings, such as high cost and the need of specialized equipment. Point-of-care (POC) diagnostic platforms have the potential to overcome these limitations, especially in low-resource countries where ZIKV is endemic. With this in mind, here we optimized and validated our RT-LAMP assay for rapid detection of ZIKV from patient samples. We found that the assay detected ZIKV from diverse sample types (serum, urine, saliva, and semen) in as little as 20 min, without RNA extraction. The RT-LAMP assay was highly specific and up to 100 times more sensitive than RT-qPCR. We then validated the assay using 100 patient serum samples collected from suspected cases of arbovirus infection in the state of Pernambuco, which was at the epicenter of the last Zika epidemic. Analysis of the results, in comparison to RT-qPCR, found that the ZIKV RT-LAMP assay provided sensitivity of 100%, specificity of 93.75%, and an overall accuracy of 95.00%. Taken together, the RT-LAMP assay provides a straightforward and inexpensive alternative for the diagnosis of ZIKV from patients and has the potential to increase diagnostic capacity in ZIKV-affected areas, particularly in low and middle-income countries.


Author(s):  
Matthew A Lalli ◽  
Joshua S Langmade ◽  
Xuhua Chen ◽  
Catrina C Fronick ◽  
Christopher S Sawyer ◽  
...  

Abstract Background Rapid, reliable, and widespread testing is required to curtail the ongoing COVID-19 pandemic. Current gold-standard nucleic acid tests are hampered by supply shortages in critical reagents including nasal swabs, RNA extraction kits, personal protective equipment, instrumentation, and labor. Methods To overcome these challenges, we developed a rapid colorimetric assay using reverse-transcription loop-mediated isothermal amplification (RT-LAMP) optimized on human saliva samples without an RNA purification step. We describe the optimization of saliva pretreatment protocols to enable analytically sensitive viral detection by RT-LAMP. We optimized the RT-LAMP reaction conditions and implemented high-throughput unbiased methods for assay interpretation. We tested whether saliva pretreatment could also enable viral detection by conventional reverse-transcription quantitative polymerase chain reaction (RT-qPCR). Finally, we validated these assays on clinical samples. Results The optimized saliva pretreatment protocol enabled analytically sensitive extraction-free detection of SARS-CoV-2 from saliva by colorimetric RT-LAMP or RT-qPCR. In simulated samples, the optimized RT-LAMP assay had a limit of detection of 59 (95% confidence interval: 44–104) particle copies per reaction. We highlighted the flexibility of LAMP assay implementation using 3 readouts: naked-eye colorimetry, spectrophotometry, and real-time fluorescence. In a set of 30 clinical saliva samples, colorimetric RT-LAMP and RT-qPCR assays performed directly on pretreated saliva samples without RNA extraction had accuracies greater than 90%. Conclusions Rapid and extraction-free detection of SARS-CoV-2 from saliva by colorimetric RT-LAMP is a simple, sensitive, and cost-effective approach with broad potential to expand diagnostic testing for the virus causing COVID-19.


Sign in / Sign up

Export Citation Format

Share Document