scholarly journals Characterization of red fluorescent reporters for dual-color in vivo three-photon microscopy

2021 ◽  
Author(s):  
Michael A. Thornton ◽  
Gegory L. Futia ◽  
Michael E. Stockton ◽  
Baris N. Ozbay ◽  
Karl Kilborn ◽  
...  

Three-photon (3P) microscopy significantly increases the depth and resolution of in vivo imaging due to decreased scattering and nonlinear optical sectioning. Past studies used separate 1300 and 1700 nm excitation sources to excite green and red fluorescent proteins. Recently work shows that a single 1300 nm excitation source allows for dual color 3P imaging with increased signal-to-background and decreased average power. Future use of single excitation 3P microscopes would reduce the need for additional custom optical elements and decrease cost. However, there is a lack of experimental data characterizing the excitation properties of specific fluorophore combinations in the near-infrared range. Here, we assess the dual-color imaging potential of tdTomato or mScarlet in combination with EGFP when excited by a single excitation source tuned from 1225-1360 nm in the living mouse brain. We find that tdTomato and mScarlet, expressed in oligodendrocytes and neurons respectively, have exceptional signal-to-background in the 1300-1360 nm range in deep cortex, consistent with enhanced 3P cross sections. These results suggest that a single excitation source is advantageous for multiple applications of dual-color structural and functional brain imaging highlighting the importance of empirical characterization of individual fluorophores in the near-infrared region.

2020 ◽  
Vol 48 (6) ◽  
pp. 2657-2667
Author(s):  
Felipe Montecinos-Franjola ◽  
John Y. Lin ◽  
Erik A. Rodriguez

Noninvasive fluorescent imaging requires far-red and near-infrared fluorescent proteins for deeper imaging. Near-infrared light penetrates biological tissue with blood vessels due to low absorbance, scattering, and reflection of light and has a greater signal-to-noise due to less autofluorescence. Far-red and near-infrared fluorescent proteins absorb light >600 nm to expand the color palette for imaging multiple biosensors and noninvasive in vivo imaging. The ideal fluorescent proteins are bright, photobleach minimally, express well in the desired cells, do not oligomerize, and generate or incorporate exogenous fluorophores efficiently. Coral-derived red fluorescent proteins require oxygen for fluorophore formation and release two hydrogen peroxide molecules. New fluorescent proteins based on phytochrome and phycobiliproteins use biliverdin IXα as fluorophores, do not require oxygen for maturation to image anaerobic organisms and tumor core, and do not generate hydrogen peroxide. The small Ultra-Red Fluorescent Protein (smURFP) was evolved from a cyanobacterial phycobiliprotein to covalently attach biliverdin as an exogenous fluorophore. The small Ultra-Red Fluorescent Protein is biophysically as bright as the enhanced green fluorescent protein, is exceptionally photostable, used for biosensor development, and visible in living mice. Novel applications of smURFP include in vitro protein diagnostics with attomolar (10−18 M) sensitivity, encapsulation in viral particles, and fluorescent protein nanoparticles. However, the availability of biliverdin limits the fluorescence of biliverdin-attaching fluorescent proteins; hence, extra biliverdin is needed to enhance brightness. New methods for improved biliverdin bioavailability are necessary to develop improved bright far-red and near-infrared fluorescent proteins for noninvasive imaging in vivo.


2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Yusaku Hontani ◽  
Mikhail Baloban ◽  
Francisco Velazquez Escobar ◽  
Swetta A. Jansen ◽  
Daria M. Shcherbakova ◽  
...  

AbstractNear-infrared fluorescent proteins (NIR FPs) engineered from bacterial phytochromes are widely used for structural and functional deep-tissue imaging in vivo. To fluoresce, NIR FPs covalently bind a chromophore, such as biliverdin IXa tetrapyrrole. The efficiency of biliverdin binding directly affects the fluorescence properties, rendering understanding of its molecular mechanism of major importance. miRFP proteins constitute a family of bright monomeric NIR FPs that comprise a Per-ARNT-Sim (PAS) and cGMP-specific phosphodiesterases - Adenylyl cyclases - FhlA (GAF) domain. Here, we structurally analyze biliverdin binding to miRFPs in real time using time-resolved stimulated Raman spectroscopy and quantum mechanics/molecular mechanics (QM/MM) calculations. Biliverdin undergoes isomerization, localization to its binding pocket, and pyrrolenine nitrogen protonation in <1 min, followed by hydrogen bond rearrangement in ~2 min. The covalent attachment to a cysteine in the GAF domain was detected in 4.3 min and 19 min in miRFP670 and its C20A mutant, respectively. In miRFP670, a second C–S covalent bond formation to a cysteine in the PAS domain occurred in 14 min, providing a rigid tetrapyrrole structure with high brightness. Our findings provide insights for the rational design of NIR FPs and a novel method to assess cofactor binding to light-sensitive proteins.


2012 ◽  
Vol 51 (39) ◽  
pp. 9818-9821 ◽  
Author(s):  
Guosong Hong ◽  
Joshua T. Robinson ◽  
Yejun Zhang ◽  
Shuo Diao ◽  
Alexander L. Antaris ◽  
...  

2020 ◽  
Vol 10 (12) ◽  
pp. 4353
Author(s):  
Houssemeddine Krraoui ◽  
Charlotte Tripon-Canseliet ◽  
Ivan Maksimovic ◽  
Stefan Varault ◽  
Gregoire Pillet ◽  
...  

Microwave performance extraction of optically-controlled squared frequency-selective surface (FSS) structures printed on highly resistive (HR) silicon substrate are presented, from a innovative bistatic microwave photonic characterization technique operating in the 40 to 60 GHz frequency range, commonly used for radar cross section (RCS) measurements. According to typical physical photon absorption phenomenon occurring in photoconductive materials, these structures demonstrate experimentally a bandpass filtering frequency response cancellation through reflection coefficient measurements, under specific incident collective illumination in the Near-infrared region (NIR). This behaviour is attributed to their microwave surface impedance modification accordingly to the incident optical power, allowing ultrafast reconfigurability of such devices by optics


2019 ◽  
Vol 33 (36) ◽  
pp. 1950461 ◽  
Author(s):  
Yan Qi ◽  
Bingqian Bi ◽  
Yilin Yan ◽  
Lecheng Tian

In this study, a leaf-like [Formula: see text] mixed phase nanosheets array was successfully prepared by anodization. XRD, EDS, and XPS analysis confirmed the formation of [Formula: see text] mixed phase nanostructures. SEM images indicate that the fabricated [Formula: see text] mixed phase nanosheets almost grow vertically on the substrate. The average height of nanosheets is approximately 500 nm. The optical absorption of the mixed phase covers the entire wavelength region of visible light and a little part of the near-infrared region of short wavelength.


Sign in / Sign up

Export Citation Format

Share Document