scholarly journals Utilizing broadband X-rays in a Bragg coherent X-ray diffraction imaging experiment

2016 ◽  
Vol 23 (5) ◽  
pp. 1241-1244 ◽  
Author(s):  
Wonsuk Cha ◽  
Wenjun Liu ◽  
Ross Harder ◽  
Ruqing Xu ◽  
Paul H. Fuoss ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Three Dimensions ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Individual Crystal ◽  
Sample Motion ◽  
Diffraction Imaging ◽  
Individual Grains

A method is presented to simplify Bragg coherent X-ray diffraction imaging studies of complex heterogeneous crystalline materials with a two-stage screening/imaging process that utilizes polychromatic and monochromatic coherent X-rays and is compatible within situsample environments. Coherent white-beam diffraction is used to identify an individual crystal particle or grain that displays desired properties within a larger population. A three-dimensional reciprocal-space map suitable for diffraction imaging is then measured for the Bragg peak of interest using a monochromatic beam energy scan that requires no sample motion, thus simplifyingin situchamber design. This approach was demonstrated with Au nanoparticles and will enable, for example, individual grains in a polycrystalline material of specific orientation to be selected, then imaged in three dimensions while under load.

Three-dimensional X-ray diffraction imaging of process-induced dislocation loops in silicon

2011 ◽  
Vol 44 (3) ◽  
pp. 526-531 ◽  
Author(s):  
David Allen ◽  
Jochen Wittge ◽  
Jennifer Stopford ◽  
Andreas Danilewsky ◽  
Patrick McNally
Keyword(s):  
Semiconductor Industry ◽  
Three Dimensional ◽  
Crystal Defects ◽  
Three Dimensions ◽  
Dimensional Structure ◽  
Dislocation Loops ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Imaging ◽  
Relationship Of

In the semiconductor industry, wafer handling introduces micro-cracks at the wafer edge and the causal relationship of these cracks to wafer breakage is a difficult task. By way of understanding the wafer breakage process, a series of nano-indents were introduced both into 20 × 20 mm (100) wafer pieces and into whole wafers as a means of introducing controlled strain. Visualization of the three-dimensional structure of crystal defects has been demonstrated. The silicon samples were then treated by various thermal anneal processes to initiate the formation of dislocation loops around the indents. This article reports the three-dimensional X-ray diffraction imaging and visualization of the structure of these dislocations. A series of X-ray section topographs of both the indents and the dislocation loops were taken at the ANKA Synchrotron, Karlsruhe, Germany. The topographs were recorded on a CCD system combined with a high-resolution scintillator crystal and were measured by repeated cycles of exposure and sample translation along a direction perpendicular to the beam. The resulting images were then rendered into three dimensions utilizing open-source three-dimensional medical tomography algorithms that show the dislocation loops formed. Furthermore this technique allows for the production of a video (avi) file showing the rotation of the rendered topographs around any defined axis. The software also has the capability of splitting the image along a segmentation line and viewing the internal structure of the strain fields.

Atmospheric coherent X-ray diffraction imaging for in situ structural analysis at SPring-8 Hyogo beamline BL24XU

2018 ◽  
Vol 25 (4) ◽  
pp. 1229-1237
Author(s):  
Yuki Takayama ◽  
Yuki Takami ◽  
Keizo Fukuda ◽  
Takamasa Miyagawa ◽  
Yasushi Kagoshima
Keyword(s):  
Structural Analysis ◽  
Control Device ◽  
Photon Flux ◽  
X Rays ◽  
Atmospheric Conditions ◽  
X Ray Diffraction ◽  
Macroporous Silica ◽  
X Ray ◽  
Diffraction Imaging

Coherent X-ray diffraction imaging (CXDI) is a promising technique for non-destructive structural analysis of micrometre-sized non-crystalline samples at nanometre resolutions. This article describes an atmospheric CXDI system developed at SPring-8 Hyogo beamline BL24XU for in situ structural analysis and designed for experiments at a photon energy of 8 keV. This relatively high X-ray energy enables experiments to be conducted under ambient atmospheric conditions, which is advantageous for the visualization of samples in native states. The illumination condition with pinhole-slit optics is optimized according to wave propagation calculations based on the Fresnel–Kirchhoff diffraction formula so that the sample is irradiated by X-rays with a plane wavefront and high photon flux of ∼1 × 1010 photons/16 µmø(FWHM)/s. This work demonstrates the imaging performance of the atmospheric CXDI system by visualizing internal voids of sub-micrometre-sized colloidal gold particles at a resolution of 29.1 nm. A CXDI experiment with a single macroporous silica particle under controlled humidity was also performed by installing a home-made humidity control device in the system. The in situ observation of changes in diffraction patterns according to humidity variation and reconstruction of projected electron-density maps at 5.2% RH (relative humidity) and 82.6% RH at resolutions of 133 and 217 nm, respectively, were accomplished.

Three-Dimensional X-Ray Diffraction Microscopy Using High-Energy X-Rays

MRS Bulletin ◽  
2004 ◽  
Vol 29 (3) ◽  
pp. 166-169 ◽  
Author(s):  
Henning F. Poulsen ◽  
Dorte Juul Jensen ◽  
Gavin B.M. Vaughan
Keyword(s):  
Materials Science ◽  
Three Dimensional ◽  
High Energy ◽  
Polycrystalline Materials ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Reconstruction Methods ◽  
The Individual ◽  
Individual Grains

AbstractThree-dimensional x-ray diffraction (3DXRD) microscopy is a tool for fast and nondestructive characterization of the individual grains, subgrains, and domains inside bulk materials. The method is based on diffraction with very penetrating hard x-rays (E ≥ 50 keV), enabling 3D studies of millimeter-to-centimeter-thick specimens.The position, volume, orientation, and elastic and plastic strain can be derived for hundreds of grains simultaneously. Furthermore, by applying novel reconstruction methods, 3D maps of the grain boundaries can be generated. The 3DXRD microscope in use at the European Synchrotron Radiation Facility in Grenoble, France, has a spatial resolution of ∼5 μm and can detect grains as small as 150 nm. The technique enables, for the first time, dynamic studies of the individual grains within polycrystalline materials. In this article, some fundamental materials science applications of 3DXRD are reviewed: studies of nucleation and growth kinetics during recrystallization, recovery, and phase transformations, as well as studies of polycrystal deformation.

Metal Microstructures in Four Dimensions

2004 ◽  
Author(s):  
S. F. Nielsen ◽  
C. Gundlach ◽  
E. M. Lauridsen ◽  
R. V. Martins ◽  
H. F. Poulsen ◽  
...  
Keyword(s):  
Grain Growth ◽  
Three Dimensional ◽  
High Energy ◽  
Third Generation ◽  
Plastic Strains ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Four Dimensions

By Three Dimensional X-ray Diffraction (3DXRD) microscopy it is possible to characterize microstructures non-destructively in 3 dimensions. The measurements are furthermore typically so fast that dynamics may be monitored in-situ, giving also the 4th dimension, namely the time. The 3DXRD technique is based on diffraction of high energy x-rays from third generation synchrotron sources. In the present paper the 3DXRD technique is described and it’s potentials are illustrated by examples relating to elastic and plastic strains, recovery, recrystallization and grain growth.

Applications of High-Resolution Powder X-Ray Diffraction

2007 ◽  
Vol 130 ◽  
pp. 7-14 ◽  
Author(s):  
Andrew N. Fitch
Keyword(s):  
High Resolution ◽  
Synchrotron Radiation ◽  
Powder Diffraction ◽  
X Rays ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Structural Characterisation ◽  
Pdf Analysis

The highly-collimated, intense X-rays produced by a synchrotron radiation source can be harnessed to build high-resolution powder diffraction instruments with a wide variety of applications. The general advantages of using synchrotron radiation for powder diffraction are discussed and illustrated with reference to the structural characterisation of crystalline materials, atomic PDF analysis, in-situ and high-throughput studies where the structure is evolving between successive scans, and the measurement of residual strain in engineering components.

In situ reactor to image catalysts at work in three-dimensions by Bragg coherent X-ray diffraction

2019 ◽  
Vol 336 ◽  
pp. 169-173 ◽  
Author(s):  
Amélie Rochet ◽  
Ana Flávia Suzana ◽  
Aline R. Passos ◽  
Tiago Kalile ◽  
Felisa Berenguer ◽  
...  
Keyword(s):  
Three Dimensions ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals In Situ Coherent X-ray Diffraction during Three-Point Bending of a Au Nanowire: Visualization and Quantification

2018 ◽  
Vol 2 (4) ◽  
pp. 24 ◽  
Author(s):  
Anton Davydok ◽  
Thomas Cornelius ◽  
Zhe Ren ◽  
Cedric Leclere ◽  
Gilbert Chahine ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Reciprocal Space ◽  
X Ray Diffraction ◽  
Complex Deformation ◽  
X Ray ◽  
Three Point Bending ◽  
Atomic Force ◽  
Au Nanowire ◽  
Before And After

The three-point bending behavior of a single Au nanowire deformed by an atomic force microscope was monitored by coherent X-ray diffraction using a sub-micrometer sized hard X-ray beam. Three-dimensional reciprocal-space maps were recorded before and after deformation by standard rocking curves and were measured by scanning the energy of the incident X-ray beam during deformation at different loading stages. The mechanical behavior of the nanowire was visualized in reciprocal space and a complex deformation mechanism is described. In addition to the expected bending of the nanowire, torsion was detected. Bending and torsion angles were quantified from the high-resolution diffraction data.

Three dimensional V2O5/NaV6O15 hierarchical heterostructures: Controlled synthesis and synergistic effect investigated by in situ X-ray diffraction

Nano Energy ◽  
2016 ◽  
Vol 27 ◽  
pp. 147-156 ◽  
Author(s):  
Chaojiang Niu ◽  
Xiong Liu ◽  
Jiashen Meng ◽  
Lin Xu ◽  
Mengyu Yan ◽  
...  
Keyword(s):  
Synergistic Effect ◽  
Three Dimensional ◽  
Controlled Synthesis ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals X-Ray Single Crystal Structural Analysis of Magnetically Oriented Microcrystals

2014 ◽  
Vol 70 (a1) ◽  
pp. C1138-C1138
Author(s):  
Chiaki Tsuboi ◽  
Kazuki Aburaya ◽  
Shingo Higuchi ◽  
Fumiko Kimura ◽  
Masataka Maeyama ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Crystal Structure ◽  
Single Crystal ◽  
Three Dimensional ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
Data Set ◽  
Uv Curable ◽  
X Ray

We have developed magnetically oriented microcrystal array (MOMA) technique that enables single crystal X-ray diffraction analyses from microcrystalline powder. In this method, microcrystals suspended in a UV-curable monomer matrix are there-dimensionally aligned by special rotating magnetic field, followed by consolidation of the matrix by photopolymerization. From thus achieved MOMAs, we have been succeeded in crystal structure analysis for some substances [1, 2]. Though MOMA method is an effective technique, it has some problems as follows: in a MOMA, the alignment is deteriorated during the consolidation process. In addition, the sample microcrystals cannot be recovered from a MOMA. To overcome these problems, we performed an in-situ X-ray diffraction measurement using a three-dimensional magnetically oriented microcrystal suspension (3D MOMS) of L-alanine. An experimental setting of the in-situ X-ray measurement of MOMS is schematically shown in the figure. L-alanine microcrystal suspension was poured into a glass capillary and placed on the rotating unit equipped with a pair of neodymium magnets. Rotating X-ray chopper with 10°-slits was placed between the collimator and the suspension. By using this chopper, it was possible to expose the X-ray only when the rotating MOMS makes a specific direction with respect to the impinging X-ray. This has the same effect as the omega oscillation in conventional single crystal measurement. A total of 22 XRD images of 10° increments from 0° to 220° were obtained. The data set was processed by using conventional software to obtain three-dimensional molecular structure of L-alanine. The structure is in good agreement with that reported for the single crystal. R1 and wR2 were 6.53 and 17.4 %, respectively. RMSD value between the determined molecular structure and the reported one was 0.0045 Å. From this result, we conclude that this method can be effective and practical to be used widely for crystal structure analyses.

Sign in / Sign up

Export Citation Format

Share Document