scholarly journals Crystal structure of dichlorido{2-methyl-2-[(pyridin-2-ylmethyl)amino]propan-1-ol-κ3N,N′,O}copper(II) from synchrotron data

2016 ◽  
Vol 72 (10) ◽  
pp. 1400-1403 ◽  
Author(s):  
Jong Won Shin ◽  
Dong Won Lee ◽  
Dae-Woong Kim ◽  
Dohyun Moon
Keyword(s):  
Metal Ion ◽  
Axial Position ◽  
Coordination Geometry ◽  
X Ray Diffraction ◽  
Intermolecular Hydrogen Bonds ◽  
X Ray ◽  
Face To Face ◽  
Ft Ir ◽  
Hydroxy Groups ◽  
Ft Ir Spectroscopy

The title compound, [CuCl2(C10H16N2O)], has been synthesized and characterized by synchrotron single-crystal X-ray diffraction and FT–IR spectroscopy. The 2-methyl-2-[(pyridin-2-ylmethyl)amino]propan-1-ol (mpmapOH) ligand, including pyridine, amine and hydroxy groups, was synthesized by the reaction of 2-amino-2-methylpropan-1-ol with pyridine-2-carbaldehyde and was characterized by NMR spectroscopy. In its CuIIcomplex, the metal ion has a distorted square-pyramidal coordination geometry with two N and one O atom of the mpmapOH ligand and one chloride anion in the equatorial plane, and the second chloride in an axial position. The bond lengths involving the CuIIion range from 1.9881 (10) to 2.0409 (9) for the Cu—N and Cu—O bonds, and from 2.2448 (5) to 2.5014 (6) Å for the equatorial and axial Cu—Cl bonds, respectively. Intermolecular hydrogen bonds (N—H...Cl and O—H...Cl) and face-to-face π–π interactions stabilize the molecular structure and give rise to a two-dimensional supramolecular structure extending parallel to (101).

scholarly journals Multidimensional Ln-Aminophthalate Photoluminescent Coordination Polymers

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1786
Author(s):  
Carla Queirós ◽  
Chen Sun ◽  
Ana M. G. Silva ◽  
Baltazar de Castro ◽  
Juan Cabanillas-Gonzalez ◽  
...  
Keyword(s):  
Water Content ◽  
Coordination Polymers ◽  
Metal Ion ◽  
Low Cost ◽  
Microwave Assisted Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wide Range ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

The development of straightforward reproducible methods for the preparation of new photoluminescent coordination polymers (CPs) is an important goal in luminescence and chemical sensing fields. Isophthalic acid derivatives have been reported for a wide range of applications, and in addition to their relatively low cost, have encouraged its use in the preparation of novel lanthanide-based coordination polymers (LnCPs). Considering that the photoluminescent properties of these CPs are highly dependent on the existence of water molecules in the crystal structure, our research efforts are now focused on the preparation of CP with the lowest water content possible, while considering a green chemistry approach. One- and two-dimensional (1D and 2D) LnCPs were prepared from 5-aminoisophthalic acid and Sm3+/Tb3+ using hydrothermal and/or microwave-assisted synthesis. The unprecedented LnCPs were characterized by single-crystal X-ray diffraction (SCRXD), powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), and their photoluminescence (PL) properties were studied in the solid state, at room temperature, using the CPs as powders and encapsulated in poly(methyl methacrylate (PMMA) films, envisaging the potential preparation of devices for sensing. The materials revealed interesting PL properties that depend on the dimensionality, metal ion, co-ligand used and water content.

Hydrothermal synthesis, crystal structure and properties of a two-dimensional uranyl coordination polymer based on a flexible zwitterionic ligand

2018 ◽  
Vol 74 (3) ◽  
pp. 366-371 ◽  
Author(s):  
Wen Cui ◽  
Ruyu Wang ◽  
Xi Shu ◽  
Yu Fan ◽  
Yang Liu ◽  
...  
Keyword(s):  
Coordination Polymer ◽  
Hydrothermal Reaction ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Uranyl Compounds ◽  
X Ray ◽  
Potential Applications ◽  
Ft Ir ◽  
Fuel Reprocessing ◽  
Ft Ir Spectroscopy

The interaction between the uranyl cation, (UO2)2+, and organic species is of interest due to the potential applications of the resulting compounds with regard to nuclear waste disposal and nuclear fuel reprocessing. The hydrothermal reaction of various uranyl compounds with flexible zwitterionic 1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate) dihydrochloride (Bpmb·2HCl) in deionized water containing drops of H2SO4resulted in the formation of a novel two-dimensional uranyl coordination polymer, namely poly[tetraoxido{μ2-1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate)}di-μ3-sulfato-diuranium(VI)], [(UO2)2(SO4)2(C20H16N2O4)]n, (1). Single-crystal X-ray diffraction reveals that this coordination polymer exhibits a layered arrangement and the (UO2)2+centre is coordinated by five equatorial O atoms. The structure was further characterized by FT–IR spectroscopy, powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA). The polymer shows high thermal stability up to 696 K. Furthermore, the photoluminescence properties of (1) has also been studied, showing it to exhibit a typical uranyl fluorescence.

scholarly journals The Bio-fabrication of Gold Nanoparticles (AuNPs) by Green Method and Study of its Electrochemical Applications

2020 ◽  
Vol 1 (4) ◽  
pp. 22-25
Author(s):  
Azwan Morni
Keyword(s):  
Gold Nanoparticles ◽  
Ir Spectroscopy ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Green Method ◽  
Oh Groups ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

This study reports a green method for the synthesis of gold nanoparticles (AuNPs) using the aqueous extract of Salix aegyptiaca extract. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Novel methods of ideally synthesizing AuNPs are thus thought that are formed at ambient temperatures, neutral pH, low costs and environmentally friendly fashion. AuNPs were characterized with different techniques such as UV–vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, and TEM. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary carbonyl group, -OH groups and other stabilizing functional groups. TEM experiments showed that these nanoparticles are formed with various shapes and X-ray diffraction pattern showed high purity and face centered cubic structure of AuNPs. For electrochemical properties of AuNPs, a modified glassy carbon electrode using AuNPs (AuNPs/GCE) was investigated. The results show that electronic transmission rate between the modified electrode and [Fe (CN)6]3-/4- increased.

Ball-Milling Stimulated Mechanochemical Processes in the System “Titanium-Toluene”

2019 ◽  
Vol 946 ◽  
pp. 351-356 ◽  
Author(s):  
Olga M. Kanunnikova ◽  
V.V. Aksenova ◽  
G.A. Dorofeev
Keyword(s):  
Ball Milling ◽  
Mechanical Energy ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Liquid Phases ◽  
Ft Ir ◽  
Titanium Powders ◽  
Solid Phases ◽  
Ft Ir Spectroscopy

The present work deals with the investigation of the transformations of the solid and liquid phases at high energy planetary ball milling of toluene together with titanium powder. The sequence of structural toluene transformations using FT-IR spectroscopy was investigated. Phase constitutions and morphology of ball milled titanium powders were studied by X-ray diffraction and scanning electron microscopy. It is shown that mechanically induced destruction of toluene occurs by the mechanism of catalytic cracking. During ball milling, concentration of aromatic hydrocarbons in the liquid phase decreases, at the same time the content of alkenes, cycloalkanes, and isoalkanes increases. The main solid products of the mechanosynthesis were cubic and hexagonal titanium carbo-hydrides.Evolution of lattice parameters, crystallites sizes, and micro-stresses of the solid phases during ball milling as a function of the mechanical energy dose have been discussed.

scholarly journals Two-Step Separation of Chitin from Shrimp Shells Using Citric Acid and Deep Eutectic Solvents with the Assistance of Microwave

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 409 ◽  
Author(s):  
Dandan Zhao ◽  
Wen-Can Huang ◽  
Na Guo ◽  
Shuye Zhang ◽  
Changhu Xue ◽  
...  
Keyword(s):  
Citric Acid ◽  
Deep Eutectic Solvents ◽  
Second Step ◽  
X Ray Diffraction ◽  
X Ray ◽  
Shrimp Shells ◽  
Ft Ir ◽  
Scanning Electron ◽  
Ft Ir Spectroscopy

In this research, a two-step extraction approach was developed for chitin preparation from shrimp shells by utilizing citric acids and deep eutectic solvents (DESs), which effectively removed minerals and proteins. In the first step, minerals of shrimp shells were removed by citric acid, and the demineralization efficiency reached more than 98%. In the second step, the removal of protein was carried out using deep eutectic solvents with the assistance of microwave, and the deproteinization efficiency was more than 88%. The results of scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction analysis (XRD), and thermogravimetric analysis (TGA) showed that the quality of DES-prepared chitin was comparable to that of traditional acid/alkali-prepared chitin. These results were realized without utilizing hazardous chemicals, which are detrimental to the environment. This research indicates that a DES-based preparation approach has the potential for application in the recovery of biopolymers from natural resources.

Two novel organic–inorganic hybrid materials from tetrachloridometallate(II) salts and 4-[(E)-2-(pyridin-1-ium-2-yl)ethenyl]pyridinium

2015 ◽  
Vol 71 (1) ◽  
pp. 48-52 ◽  
Author(s):  
José J. Campos-Gaxiola ◽  
Susana P. Arredondo Rea ◽  
Ramón Corral Higuera ◽  
Herbert Höpfl ◽  
Adriana Cruz Enríquez
Keyword(s):  
Three Dimensional ◽  
Stacking Interactions ◽  
X Ray Diffraction ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Pyridinium Cation ◽  
Hydrogen Bonding Interactions ◽  
Dimensional Network ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Two organic–inorganic hybrid compounds have been prepared by the combination of the 4-[(E)-2-(pyridin-1-ium-2-yl)ethenyl]pyridinium cation with perhalometallate anions to give 4-[(E)-2-(pyridin-1-ium-2-yl)ethenyl]pyridinium tetrachloridocobaltate(II), (C12H12N2)[CoCl4], (I), and 4-[(E)-2-(pyridin-1-ium-2-yl)ethenyl]pyridinium tetrachloridozincate(II), (C12H12N2)[ZnCl4], (II). The compounds have been structurally characterized by single-crystal X-ray diffraction analysis, showing the formation of a three-dimensional network throughX—H...ClnM−(X= C, N+;n= 1, 2;M= CoII, ZnII) hydrogen-bonding interactions and π–π stacking interactions. The title compounds were also characterized by FT–IR spectroscopy and thermogravimetric analysis (TGA).

Structure–property relationships in hybrid (C3H5N2)3[Sb2I9] and (C3H5N2)3[Bi2I9] isomorphs

2016 ◽  
Vol 3 (10) ◽  
pp. 1306-1316 ◽  
Author(s):  
M. Węcławik ◽  
A. Gągor ◽  
R. Jakubas ◽  
A. Piecha-Bisiorek ◽  
W. Medycki ◽  
...  
Keyword(s):  
Proton Magnetic Resonance ◽  
Optical Observations ◽  
Structure Property ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure Property Relationships ◽  
Hybrid Crystals ◽  
Ft Ir ◽  
Two Hybrid ◽  
Ft Ir Spectroscopy

Two hybrid crystals imidazolium iodoantimonate(iii) and iodobismuthate(iii) have been synthesized and characterized in a wide temperature range (100–350 K) by means of X-ray diffraction, dielectric spectroscopy, proton magnetic resonance, FT-IR spectroscopy and optical observations.

scholarly journals Growth and Characterization of Pure and Doped L-Alanine Tartrate Single Crystals

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
K. Rajesh ◽  
B. Milton Boaz ◽  
P. Praveen Kumar
Keyword(s):  
Single Crystals ◽  
Vickers Microhardness ◽  
Diffraction Method ◽  
Dielectric Studies ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Single crystals of pure and Lanthanum doped L-Alanine Tartrate were grown by slow evaporation method. The cell parameters were determined using single crystal X-ray diffraction method. To improve the physical properties of the LAT crystal, Lanthanum dopant was added by 2 mol%. ICP studies confirm the presence of Lanthanum in the grown LAT crystal. Transparency range of the crystal was determined using UV-VIS-NIR spectrophotometer. The functional groups of pure and doped LAT crystals were analyzed by FT-IR spectroscopy. Using Vickers microhardness tester, mechanical strength of the material was found. Dielectric studies of pure and doped LAT single crystals were carried out. The doped LAT crystal is found to have efficiency higher than that of pure LAT crystal.

1,3,5-Tris[(trimethylstannyl)ethynyl]- 1,3,5-trimethyl-1,3,5-trisilacyclohexane

2016 ◽  
Vol 71 (1) ◽  
pp. 81-84 ◽  
Author(s):  
Eugen Weisheim ◽  
Hans-Georg Stammler ◽  
Norbert W. Mitzel
Keyword(s):  
Mass Spectrometry ◽  
Ir Spectroscopy ◽  
Single Crystal ◽  
Elemental Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

AbstractThe reaction of 1,3,5-triethynyl-1,3,5-trimethyl- 1,3,5-trisilacyclohexane with (dimethylamino)trimethylstannane afforded 1,3,5-tris[(trimethylstannyl)ethynyl]- 1,3,5-trimethyl-1,3,5-trisilacyclohexane with tin-functionalised ethynyl groups. The compound was characterized by single-crystal X-ray diffraction, elemental analysis, mass spectrometry, NMR and FT-IR spectroscopy.

Synthesis and Characterization of HgSe Nanostructure Using a Novel Precursor

2013 ◽  
Vol 32 (2) ◽  
pp. 157-162 ◽  
Author(s):  
Mahdiyeh Esmaeili-Zare ◽  
Masoud Salavati-Niasari ◽  
Davood Ghanbari
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Sonochemical Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Mercury Selenide ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

AbstractMercury selenide nanostructures were synthesized from the reaction of N, N′-bis(salicylidene)propane-1,3-diamine mercury complex, (Hg(Salpn)) as a novel precursor, via sonochemical method. The effect of different surfactant on the morphology and particle size of the products was investigated. Products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray energy dispersive spectroscopy (EDS).

Sign in / Sign up

Export Citation Format

Share Document