The influence of temperature on the inhibition of carbon steel corrosion in acidic lignin

2015 ◽  
Vol 62 (5) ◽  
pp. 301-306 ◽  
Author(s):  
Solhan Yahya ◽  
Norinsan Kamil Othman ◽  
Abdul Razak Daud ◽  
Azman Jalar ◽  
Roslina Ismail
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Acid Corrosion ◽  
Steel Corrosion ◽  
Inhibition Mechanism ◽  
Free Energy Of Adsorption ◽  
Lignin Concentration ◽  
Content Type ◽  
Influence Of Temperature

Purpose – This paper aims to investigate the influence of temperature and lignin concentration on the inhibition of carbon steel corrosion in 1 M HCl. Design/methodology/approach – Weight loss corrosion tests were performed at different temperatures in the range of 30-70°C (303-343 K). Findings – It was found that the corrosion inhibition efficiency (IE) of lignin on the carbon steel decreased when the temperature was increased from 60 to 70°C. However, at lower temperatures ranging from 30 to 50°C, the IE improved, due to occurrence of lignin adsorption on the surface of metal specimens. The IE was higher with increasing lignin concentration, thus reducing the weight loss of the carbon steel. The adsorption phenomenon involved exothermic processes because the value of enthalpy of adsorption (ΔH°ads) < 0 and Gibbs free energy of adsorption (ΔG°ads) were less negative with increase in temperature. The entropy of adsorption (ΔS°ads) had negative values, representing the decrease in disorder of adsorption. The adsorption of lignin on the carbon steel surface in 1 M HCl was comprehensive, as deduced from kinetic and thermodynamic parameters. However, physisorption was the major contributor in the inhibition mechanism. The inhibitive features of carbon steel surfaces showed less damage once the steel was treated in lignin, as evident from macroscopy images. Practical implications – The use of lignin as an acid corrosion inhibitor at high temperature is practical in metal surface treatment process. Social implications – The use of organic compounds gives an advantage to the environment, universal health and save cost, as the compounds can be found in nature. Originality/value – Lignin can act as a flexible corrosion inhibitor within the temperature range of 30-70°C in 1 M HCl because it exhibits comprehensive adsorption (i.e. a combination of both physisorption and chemisorption) at specific concentrations.

Corrosion inhibition of some azole derivatives on carbon steel in hydrochloric acid solution

2014 ◽  
Vol 61 (5) ◽  
pp. 300-306 ◽  
Author(s):  
B.P. Markhali ◽  
R. Naderi ◽  
M. Sayebani ◽  
M. Mahdavian
Keyword(s):  
Carbon Steel ◽  
Hydrochloric Acid ◽  
Organic Compounds ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Acid Corrosion ◽  
Molecular Structures ◽  
Inhibition Mechanism ◽  
Content Type

Purpose – The purpose of this paper is investigate the inhibition efficiency of three similar bi-cyclic organic compounds, namely, benzimidazole (BI), benzotriazole (BTAH) and benzothiazole (BTH) on carbon steel in 1 M hydrochloric acid (HCl) solution. Organic inhibitors are widely used to protect metals in acidic media. Among abundant suggestions for acid corrosion inhibitors, azole compounds have gained attention. Design/methodology/approach – The inhibition efficiency of the three organic compounds was investigated using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Findings – Superiorities of BTH and BTAH corrosion inhibitors were shown by EIS data and polarization curves. Moreover, the results revealed that BTAH and BTH can function as effective mixed-type adsorptive inhibitors, whereas no inhibition behavior was observed for BI. Both BTAH and BTH obeyed Longmuir adsorption isotherm. The results obtained from this isotherm showed that both inhibitors adsorbed on the specimen surface physically and chemically. The difference in inhibition efficiencies of BTAH, BTH and BI was related to the presence of nitrogen and sulfur hetero atoms on their molecular structures. Originality/value – This study evaluated inhibition efficiency of BI, BTAH and BTH using electrochemical methods. In addition, the study attempted to find inhibition mechanism of the inhibitors and to find modes of adsorption of the inhibitors, correlating effects of heteroatoms and inhibition efficiency.

Corrosion behavior of carbon steel in chloride contaminated simulated concrete pore solution with carboxylate of benzoic acid and dimethylethanolamine

2017 ◽  
Vol 64 (5) ◽  
pp. 555-562 ◽  
Author(s):  
J.Z. Liu ◽  
Jing Shun Cai ◽  
L. Shi ◽  
D. Zhao ◽  
C.C. Chen ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Benzoic Acid ◽  
Corrosion Inhibitor ◽  
Steel Surface ◽  
Threshold Level ◽  
Initial Time ◽  
Inhibition Mechanism ◽  
Content Type ◽  
Chloride Threshold

Purpose The purpose of this study is to investigate the inhibition efficiency and mechanism of a specific carboxylate corrosion inhibitor which consists of benzoic acid and dimethylethanolamine on steel surface. Design/methodology/approach The performance of carbon steel influenced by this organic inhibitor under different concentration of Cl− and immersion time was studied by linear polarization resistance and electrochemical impedance spectroscopy in a simulated concrete pore (SCP) solution. The surface morphology and composition of steel was also analyzed by optical microscopy, SEM and EDS to investigate the effect of inhibitor on the pattern of the steel surface after long-term immersion. Findings Carboxylate of benzoic acid and dimethylethanolamine can increase the chloride threshold level and decrease the corrosion area of carbon steel in SCP solution with 0.6 mol/L Cl− even after 120 days exposure. The inhibition mechanism of inhibitor lies in quick adsorption and buffering effect at initial time then formed deposited layer on steel surface after long-term immersion in chloride-rich environment. Originality/value It demonstrated that the carboxylate corrosion inhibitor not only can improve the chloride threshold level for carbon steel but also effectively decrease the corrosion rate even in chloride-rich SCP solution after long-term immersion, which is different form the conventional amino alcohol.

Influence of phytic acid on the corrosion behavior of carbon steel with different surface treatments

2018 ◽  
Vol 65 (6) ◽  
pp. 658-667 ◽  
Author(s):  
Yingjun Zhang ◽  
Baojie Dou ◽  
Yawei Shao ◽  
Xue-Jun Cui ◽  
Yanqiu Wang ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Corrosion Inhibition ◽  
Corrosion Behavior ◽  
Electrochemical Impedance ◽  
Surface Condition ◽  
Energy Dispersive Spectrometer ◽  
Surface Treatments ◽  
Inhibition Mechanism ◽  
Content Type

Purpose This paper aim to investigate the influence of PA on the corrosion behavior of carbon steel with blast cleaned or pre-rusted treatments, and interpret the inhibition mechanism of PA on the steel with different surface treatments. Design/methodology/approach The influence of PA on the corrosion behavior of blast cleaned or rusty steel was investigated by means of electrochemical impedance spectroscopy (EIS). The EIS data were analyzed using the @ZsimpWin commercial software. The morphology and component of steel after immersion were characterized by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), Fourier transformation infrared (FTIR) and X-ray diffractometer (XRD). Findings EIS analysis results indicated that PA had good corrosion inhibition for blast cleaned or rusty steel. SEM, EDS, FTIR and XRD further indicated that PA had two main corrosion inhibition processes for the corrosion inhibition of blast cleaned or rusty steel: corrosion dissolution and formation of protective barrier layers. Originality/value Most published works focus the attention only toward the effect of corrosion inhibitor for the clean metal surfaces. However, the surface condition of metal sometimes is unsatisfactory in the practical application of corrosion inhibitor, such as existing residual rust. Some studies also have shown that several corrosion inhibitors could be applied on partially rusted substrates. These inhibitors mainly include tannins and phosphoric acid, but not PA. Therefore, the authors investigated the influence of PA on the corrosion behavior of carbon steel with blast cleaned or pre-rusted treatments in this paper.

scholarly journals New Aromatic Azo-Schiff as Carbon Steel Corrosion Inhibitor in 1 M H2SO4

2018 ◽  
Vol 34 (5) ◽  
pp. 2471-2476 ◽  
Author(s):  
Hamida Edan Salman ◽  
Asim A. Balakit ◽  
Ali Ahmed Abdulridha
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Steel Corrosion ◽  
Spectroscopic Techniques ◽  
Different Temperatures ◽  
Corrosion Inhibition Efficiency

A new aromatic Schiff base with azo linkage (AS) has been synthesized and characterized by FT-IR, 1H NMR and 13C NMR spectroscopic techniques. The new compound (AS) has been evaluated as carbon steel corrosion inhibitor at different concentrations (0.005, 0.01, 0.02, 0.04 and 0.08 mM) and different temperatures (303 – 333 K). The corrosion inhibition efficiency was studied by potentiodynamic polarization and weight loss measurements. The effects of concentration and temperature on the inhibition efficiency were studied by potentiodynamic polarization studies, the results showed that increasing concentration of AS increases the inhibition efficiency while increasing the temperature decreases it, the highest corrosion inhibition efficiency, 93.9% was recorded with 0.08 mM of AS at 313 K in 1 M H2SO4. Weight loss measurements showed that the inhibition efficiency reached 97.1% in the presence of AS (0.08 mM) at 313 K. The adsorption process was found to obey Langmuir isotherm, and the adsorption thermodynamic parameters were studied. Scanning electron microscope (SEM) was used to confirm the results.

Application of Myrmecodia Pendans Extract as a Green Corrosion Inhibitor for Mild Steel in 3.5% NaCl Solution

2014 ◽  
Vol 493 ◽  
pp. 684-690 ◽  
Author(s):  
Atria Pradityana ◽  
Sulistijono ◽  
Abdullah Shahab
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Physical Adsorption ◽  
Steel Corrosion ◽  
Inhibition Mechanism ◽  
Chemical Adsorption ◽  
Inhibitor Concentration ◽  
Characteristics Analysis

The use of Myrmecodia Pendans (MP) extract as mild steel corrosion inhibitor in 3.5% NaCl media was investigated using weight loss and potentiodynamic polarization methods as well as characteristics analysis of the Fourier Transform Infra-Red (FTIR). Obtained data from weight loss and potentiodynamic polarization methods has shown the value of inhibition efficiency (% IE) is proportional toadded inhibitor concentration. Tafel constants data indicates that MP extract can act as cathodic and anodic inhibitors (type of mixed inhibitor). FTIR analysis also demonstrates the characteristics of MPextract. Occured inhibition mechanism was in the form of inhibitor adsorption process on metal surfacethat allegedly preceded by physical adsorption followed by chemical adsorption. Chemical adsorption is conceivable since metal surface scoping elevates as the increasing of inhibitor concentration.

The inhibitive properties of Nopal slime on the corrosion of steel in chloride-contaminated mortar

2015 ◽  
Vol 63 (1) ◽  
pp. 65-71 ◽  
Author(s):  
Wilfrido Martinez-Molina ◽  
Andres Torres-Acosta ◽  
Rosalba Hernández-Leos ◽  
Elia Alonso-Guzman ◽  
Itzel Mendoza-Pérez ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Electrochemical Impedance ◽  
Experimental Period ◽  
Experimental Program ◽  
Content Type ◽  
Industry Applications ◽  
Cactus Mucilage ◽  
Electrochemical Monitoring ◽  
Chloride Contaminated

Purpose – The purpose of this paper is to determine if a type of cactus mucilage, Opuntia ficus-indica (OFI), may act as a corrosion inhibitor for carbon steel in cement-based materials (mortar) exposed to chloride-laden environment. Design/methodology/approach – Mortar prisms, reinforced with carbon steel rods, were immersed in sodium chloride (NaCl) solution for five wet – dry cycles. The experimentation included electrochemical monitoring (corrosion potential, Ecorr, and polarization resistance, Rp) of carbon steel during the time of exposure until corrosion-induced cracking appeared at the mortar surface. Crack survey on the mortar prisms was performed. Carbon steel rods were retrieved from the mortar after crack survey and steel mass loss at the end of the experimental period was estimated. A comparison between the different mixtures was also performed. Findings – OFI mucilage did perform as a corrosion inhibitor of steel in chloride contaminated mortar. Research limitations/implications – The experimental program needs to be corroborated in concrete specimens with typical dimensions. The surface oxide/hydroxide formation of the carbon steel in contact with the OFI mucilage is still unknown; thus, electrochemical impedance spectroscopy (EIS) and X-ray diffraction (XRD) analyses are needed. Practical implications – OFI mucilage is a suitable natural product that can be used to increase durability of concrete structures not only in countries where OFI cactus is produced, but also in many other countries where this plant is considered a plague. Originality/value – The new information obtained from this paper is the innovative use of a by-product of this cactus plant for construction industry applications.

scholarly journals The effect of volatile organic acids and CO2 on the corrosion rate of carbon steel from a Top-of-Line-Corrosion (TLC) perspective

2021 ◽  
Vol 1201 (1) ◽  
pp. 012079
Author(s):  
S B Gjertsen ◽  
A Palencsar ◽  
M Seiersten ◽  
T H Hemmingsen
Keyword(s):  
Carbon Steel ◽  
Corrosion Rate ◽  
Organic Acid ◽  
Carbonic Acid ◽  
Acid Corrosion ◽  
Iron Concentration ◽  
Critical Factor ◽  
Steel Corrosion ◽  
Carbon Steels ◽  
Corrosion Rates

Abstract Models for predicting top-of-line corrosion (TLC) rates on carbon steels are important tools for cost-effectively designing and operating natural gas transportation pipelines. The work presented in this paper is aimed to investigate how the corrosion rates on carbon steel is affected by acids typically present in the transported pipeline fluids. This investigation may contribute to the development of improved models. In a series of experiments, the corrosion rate differences for pure CO2 (carbonic acid) corrosion and pure organic acid corrosion (acetic acid and formic acid) on X65 carbon steel were investigated at starting pH values; 4.5, 5.3, or 6.3. The experiments were conducted in deaerated low-salinity aqueous solutions at atmospheric pressure and temperature of 65 °C. The corrosion rates were evaluated from linear polarization resistance data as well as mass loss and released iron concentration. A correlation between lower pH values and increased corrosion rates was found for the organic acid experiments. However, the pH was not the most critical factor for the rates of carbon steel corrosion in these experiments. The experimental results showed that the type of acid species involved and the concentration of the undissociated acid in the solution influenced the corrosion rates considerably.

scholarly journals UAE Neem Extract as a Corrosion Inhibitor for Carbon Steel in HCl Solution

2010 ◽  
Vol 2010 ◽  
pp. 1-9 ◽  
Author(s):  
Ayssar Nahlé ◽  
Ideisan Abu-Abdoun ◽  
Ibrahim Abdel-Rahman ◽  
Maysoon Al-Khayat
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Adsorption Isotherm ◽  
Corrosion Inhibitor ◽  
Room Temperature ◽  
Tannin Content ◽  
Neem Extract ◽  
Neem Leaves ◽  
Temkin Adsorption Isotherm ◽  
Hcl Solution

The effect of aqueous extract of UAE Neem (Azadirachta Indica) on the corrosion inhibition of carbon steel in 1.0 M HCl solution was investigated electrochemically, and by weight-loss experiments at temperatures ranging from 303 to 343 K. The percentage inhibition increased with the increase of the concentration of the inhibitor. At a concentration of 2.0 g/L, the percentage inhibition reached about 87% at room temperature and 80% at 303 K. The percentage inhibition decreased with the increase of temperature. The thermodynamic parameters for the adsorption of this inhibitor on the metal surface were calculated using the Temkin adsorption isotherm. The aqueous Neem leaves extract was found to be an excellent potential corrosion inhibitor because of the high content of tannin content as well as the presence of a series of complex triterpene glycosides.

Sign in / Sign up

Export Citation Format

Share Document