RBF-based mesh morphing approach to perform icing simulations in the aviation sector

2019 ◽  
Vol 91 (4) ◽  
pp. 620-633 ◽  
Author(s):  
Corrado Groth ◽  
Emiliano Costa ◽  
Marco Evangelos Biancolini
Keyword(s):  
High Performance ◽  
Three Dimensional ◽  
Ansys Fluent ◽  
Content Type ◽  
Mesh Morphing ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Analyses ◽  
2D And 3D ◽  
First Time ◽  
Practical Implications

Purpose Numerical simulation of icing has become a standard. Once the iced shape is known, however, the analyst needs to update the computational fluid dynamics (CFD) grid. This paper aims to propose a method to update the numerical mesh with ice profiles. Design/methodology/approach The present paper concerns a novel and fast radial basis functions (RBF) mesh morphing technique to efficiently and accurately perform ice accretion simulations on industrial models in the aviation sector. This method can be linked to CFD analyses to dynamically reproduce the ice growth. Findings To verify the consistency of the proposed approach, one of the most challenging ice profile selected in the LEWICE manual was replicated and simulated through CFD. To showcase the effectiveness of this technique, predefined ice profiles were automatically applied on two-dimensional (2D) and three-dimensional (3D) cases using both commercial and open-source CFD solvers. Practical implications If ice accreted shapes are available, the meshless characteristic of the proposed approach enables its coupling with the CFD solvers currently supported by the RBF4AERO platform including OpenFOAM, SU2 and ANSYS Fluent. The advantages provided by the use of RBF are the high performance and reliability, due to the fast application of mesh smoothing and the accuracy in controlling surface mesh nodes. Originality/value As far as authors’ knowledge is concerned, this is the first time in scientific literature that RBF are proposed to handle icing simulations. Due to the meshless characteristic of the RBF mesh morphing, the proposed approach is cross solver and can be used for both 2D and 3D geometries.

The simulation of single wraparound fin on a semi-cylindrical missile body

2020 ◽  
Vol 92 (3) ◽  
pp. 418-427 ◽  
Author(s):  
Nayhel Sharma ◽  
Rakesh Kumar
Keyword(s):  
Research Study ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Future Research ◽  
Aerodynamic Coefficients ◽  
Content Type ◽  
Computational Fluid Dynamics Cfd ◽  
Predicted Values ◽  
Characteristic Trend ◽  
Practical Implications

Purpose The purpose of this paper is to establish a freestream computational fluid dynamics (CFD) model of a three-dimensional non-spinning semi-cylindrical missile model with a single wrap around fin in Mach 2.70-3.00M range and 0° angle of attack, and ultimately establishing itself for future research study. Design/methodology/approach In this study, the behaviour of flow around the fin was investigated using a κ-ϵ turbulence model of second-order of discretization. This was done using a highly structured mesh. Additionally, an inviscid CFD simulation involving the same boundary conditions have also been carried out for comparison. Findings The obtained values of aerodynamic coefficients and pressure contours visualizations are compared against their experimental and computational counterparts. A typical missile aerodynamic characteristic trend can be seen in the current CFD. Practical implications The predicted values of the aerodynamic coefficients of this single fin model have also been compared to those of the full missile body comprising of four fins from the previous research studies, and a similar aerodynamic trend can be seen. Originality/value This study explores the possibility of the use of turbulence modelling in a single fin model of a missile and provides a basic computational model for further understanding the flow behaviour near the fin.

A “Learning from Action” workshop in Japan

2019 ◽  
Vol 40 (2) ◽  
pp. 77-83
Author(s):  
Robert Douglas Hinshelwood ◽  
Luca Mingarelli ◽  
Simona Masnata
Keyword(s):  
Far East ◽  
Opportunity To Learn ◽  
Content Type ◽  
Work Activities ◽  
Defensive Role ◽  
Feedback Data ◽  
Experiential Workshop ◽  
First Time ◽  
Practical Implications

Purpose Many people in severe mentally disturbed states do not use language or other symbolic media well or coherently. Therefore, the non-verbal medium needs to be understood by workers with such people. The “Learning from Action” experiential workshop was developed in order to provide an opportunity to learn about hidden messages in the relationships and roles occurring in activities. In August 2017, a workshop was run for the first time in Japan. The purpose of this paper is to report the experience and dynamics observed by the three consultants, who are here the authors of this paper. Design/methodology/approach After the workshop all the staff and members, including interpreters, were invited to give feedback. Findings Analysis of the feedback data showed certain important dynamics, concerning especially dependence, cultural defences and the defensive role of activity in a multicultural context. Research limitations/implications This is an initial experience to be followed up by later feedback and further workshops. Practical implications Workers awareness of non-verbal communication within the roles of work activities is a training possibility. It faces various resistances including the mental health assumptions of meaninglessness of any communication outside the verbal. Originality/value This is a method of training not widely used even in European countries, and is the first in a country in the far east.

Comparison of the reluctance laminated and solid rotor synchronous machine operating at high temperatures

2019 ◽  
Vol 38 (4) ◽  
pp. 1111-1119 ◽  
Author(s):  
Marcin Lefik ◽  
Krzysztof Komeza ◽  
Ewa Napieralska-Juszczak ◽  
Daniel Roger ◽  
Piotr Andrzej Napieralski
Keyword(s):  
High Speed ◽  
Design Methodology ◽  
Three Dimensional ◽  
Synchronous Machine ◽  
Point Of View ◽  
Heat Sources ◽  
Model Calculations ◽  
Content Type ◽  
Thermal Phenomenon ◽  
Practical Implications

Purpose The purpose of this paper is to present a comparison between reluctance synchronous machine-enabling work at high internal temperature (HT° machine) with laminated and solid rotor. Design/methodology/approach To obtain heat sources for the thermal model, calculations of the electromagnetic field were made using the Opera 3D program including effect of rotation and the resulting eddy current losses. To analyse the thermal phenomenon, the 3D coupled thermal-fluid (CFD) model is used. Findings The presented results show clearly that laminated construction is much better from a point of view of efficiency and temperature. However, solid construction can be interesting for high speed machines due to their mechanical robustness. Research limitations/implications The main problem, despite the use of parallel calculations, is the long calculation time. Practical implications The obtained simulation and experimental results show the possibility of building a machine operating at a much higher ambient temperature than it was previously produced for example in the vicinity of the aircraft turbines. Originality/value The paper presents the application of fully three-dimensional coupled electromagnetic and thermal analysis of new machine constructions designed for elevated temperature.

The generation of adaptive assembly from predicting change propagation

2015 ◽  
Vol 35 (3) ◽  
pp. 269-280 ◽  
Author(s):  
Hu Qiao ◽  
Rong Mo ◽  
Ying Xiang
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Original Method ◽  
Change Propagation ◽  
Assembly Model ◽  
Practical Application ◽  
Content Type ◽  
Design Structure ◽  
Aided Design ◽  
Practical Implications

Purpose – The purpose of this paper is to establish an adaptive assembly, to realize the adaptive changing of the models and to improve the flexibility and reliability of assembly change. For a three-dimensional (3D) computer-aided design (CAD) assembly in a changing process, there are two practical problems. One is delivering parameters’ information not smoothly. The other one is to easily destroy an assembly structure. Design/methodology/approach – The paper establishes associated parameters design structure matrix of related parts, and predicts possible propagation paths of the parameters. Based on the predicted path, structured storage is made for the affected parameters, tolerance range and the calculation relations. The study combines structured path information and all constrained assemblies to build the adaptive assembly, proposes an adaptive change algorithm for assembly changing and discusses the extendibility of the adaptive assembly. Findings – The approach would improve the flexibility and reliability of assembly change and be applied to different CAD platform. Practical implications – The examples illustrate the construction and adaptive behavior of the assembly and verify the feasibility and reasonability of the adaptive assembly in practical application. Originality/value – The adaptive assembly model proposed in the paper is an original method to assembly change. And compared with other methods, good results have been obtained.

FATCA violation underlies latest US tax and securities fraud charges

2015 ◽  
Vol 16 (1) ◽  
pp. 74-76
Author(s):  
Miriam Fisher ◽  
Brian McManus
Keyword(s):  
Law Enforcement ◽  
Service Providers ◽  
Task Force ◽  
Tax Compliance ◽  
Financial Fraud ◽  
Securities Fraud ◽  
Content Type ◽  
The Impact ◽  
First Time ◽  
Practical Implications

Purpose – To explain the details and implications of a September 9, 2014 federal indictment, US v. Robert Bandfield, the first time a Foreign Account Tax Compliance Act (FATCA) violation has been charged as an “overt act” in furtherance of a tax conspiracy and securities fraud. Design/methodology/approach – Provides background, including the enactment of FATCA and the details of the indictment; describes an undercover investigation conducted by President Obama’s Financial Fraud Enforcement Task Force; and discusses the warnings this indictment sends to the global financial community. Findings – The indictment confirms the coordinated and aggressive tactics US law enforcement is now employing to investigate and prosecute offshore financial fraud. Practical implications – Banks and financial service providers need to be aware of the impact of enhanced US regulatory obligations and implement appropriate compliance measures. These institutions must also remain sensitive to risks presented by unscrupulous customers. Finally, they must be ready to manage appropriately information-gathering and investigatory inquiries originating with US authorities. Originality/value – Practical guidance from experienced tax controversy lawyers.

Diagnosis of COVID-19 using 3D CT scans and vaccination for COVID-19

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gangadhar Ch ◽  
S. Jana ◽  
Sankararao Majji ◽  
Prathyusha Kuncha ◽  
Fantin Irudaya Raj E. ◽  
...  
Keyword(s):  
Virus Isolate ◽  
Research Work ◽  
Three Dimensional ◽  
Ct Scans ◽  
Data Sets ◽  
Content Type ◽  
Infected People ◽  
3D Data ◽  
Ct Classification ◽  
First Time

Purpose For the first time in a decade, a new form of pneumonia virus, coronavirus, COVID-19, appeared in Wuhan, China. To date, it has affected millions of people, killed thousands and resulted in thousands of deaths around the world. To stop the spread of this virus, isolate the infected people. Computed tomography (CT) imaging is very accurate in revealing the details of the lungs and allows oncologists to detect COVID. However, the analysis of CT scans, which can include hundreds of images, may cause delays in hospitals. The use of artificial intelligence (AI) in radiology could help to COVID-19-positive cancer in this manner is the main purpose of the work. Design/methodology/approach CT scans are a medical imaging procedure that gives a three-dimensional (3D) representation of the lungs for clinical purposes. The volumetric 3D data sets can be regarded as axial, coronal and transverse data sets. By using AI, we can diagnose the virus presence. Findings The paper discusses the use of an AI for COVID-19, and CT classification issue and vaccination details of COVID-19 have been detailed in this paper. Originality/value Originality of the work is, all the data can be collected genuinely and did research work doneown methodology.

Fused filament printing of specialized biomedical devices: a state-of-the art review of technological feasibilities with PEEK

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Erfan Rezvani Ghomi ◽  
Saeideh Kholghi Eshkalak ◽  
Sunpreet Singh ◽  
Amutha Chinnappan ◽  
Seeram Ramakrishna ◽  
...  
Keyword(s):  
High Performance ◽  
State Of The Art ◽  
Three Dimensional ◽  
Patient Specific ◽  
Biomedical Devices ◽  
Fused Filament Fabrication ◽  
Content Type ◽  
Patient Specific Implants ◽  
Complex Design ◽  
Wide Range

Purpose The potential implications of the three-dimensional printing (3DP) technology are growing enormously in the various health-care sectors, including surgical planning, manufacturing of patient-specific implants and developing anatomical models. Although a wide range of thermoplastic polymers are available as 3DP feedstock, yet obtaining biocompatible and structurally integrated biomedical devices is still challenging owing to various technical issues. Design/methodology/approach Polyether ether ketone (PEEK) is an organic and biocompatible compound material that is recently being used to fabricate complex design geometries and patient-specific implants through 3DP. However, the thermal and rheological features of PEEK make it difficult to process through the 3DP technologies, for instance, fused filament fabrication. The present review paper presents a state-of-the-art literature review of the 3DP of PEEK for potential biomedical applications. In particular, a special emphasis has been given on the existing technical hurdles and possible technological and processing solutions for improving the printability of PEEK. Findings The reviewed literature highlighted that there exist numerous scientific and technical means which can be adopted for improving the quality features of the 3D-printed PEEK-based biomedical structures. The discussed technological innovations will help the 3DP system to enhance the layer adhesion strength, structural stability, as well as enable the printing of high-performance thermoplastics. Originality/value The content of the present manuscript will motivate young scholars and senior scientists to work in exploring high-performance thermoplastics for 3DP applications.

“Never the first time on a patient”: the stakes of high-fidelity simulation for safety training

2018 ◽  
Vol 32 (5) ◽  
pp. 23-25 ◽  
Author(s):  
Lucie Cuvelier
Keyword(s):  
Case Studies ◽  
Design Methodology ◽  
Reading Time ◽  
Safety Training ◽  
High Fidelity ◽  
High Fidelity Simulation ◽  
Content Type ◽  
Pertinent Information ◽  
First Time ◽  
Practical Implications

Purpose This paper aims to review the latest management developments across the globe and pinpoint practical implications from cutting-edge research and case studies. Design/methodology/approach This briefing is prepared by an independent writer who adds their own impartial comments and places the articles in context. Findings An operative approach is described that is designed to structure the debriefing along three axes. Practical implications The paper provides strategic insights and practical thinking that have influenced some of the world’s leading organizations. Originality/value The briefing saves busy executives and researchers hours of reading time by selecting only the very best, most pertinent information and presenting it in a condensed and easy-to-digest format.

How do I know I am valued?

2014 ◽  
Vol 26 (3/4) ◽  
pp. 188-201 ◽  
Author(s):  
Julia Claxton
Keyword(s):  
Servant Leadership ◽  
Employee Engagement ◽  
Three Dimensional ◽  
Content Type ◽  
Shared Purpose ◽  
Rich Data ◽  
Glaserian Grounded Theory ◽  
Authentic Pride ◽  
Depth Interviews ◽  
Practical Implications

Purpose – The purpose of this paper is to understand the phenomena of an employee “being valued” in the context of a manufacturing SME. Design/methodology/approach – A qualitative study using rich data from in-depth interviews following a classical (Glaserian) grounded theory. Findings – A three dimensional concept of authentic pride enablement, altruistically-orientated shared-purpose and servant leadership explained the reasons people felt valued. Research limitations/implications – The limitations were that this study was in one context Practical implications – The implications are that if organisations consider a servant leadership approach, enabling of authentic pride and fostering of altruistically-orientated shared-purpose, this may help employees feel valued. Social implications – This has implications for how organisations can show their employees that they are valued. Originality/value – “Being valued” is a concept/construct that is widely quoted as a driver for employee engagement and yet rarely unpacked.

Cooperatives: an alternative to water privatization in Greece

2014 ◽  
Vol 10 (2) ◽  
pp. 135-154 ◽  
Author(s):  
Ifigeneia Douvitsa ◽  
Demosthenis Kassavetis
Keyword(s):  
Design Methodology ◽  
Water Distribution ◽  
Water Privatization ◽  
Negative Effects ◽  
Content Type ◽  
Negative Results ◽  
Viable Solution ◽  
Water Provision ◽  
First Time ◽  
Practical Implications

Purpose – The aim of this article is to investigate the organization of water cooperatives in Greece for the first time, as promoted by a spontaneous social mobilization called Initiative 136. The above attempt appears as an alternative proposition as opposed to the state-driven full privatization of EYATH S.A. Design/methodology/approach – This article presents previous work on water cooperatives and the negative effects of water privatization worldwide, relating it to water privatization in Greek reality through the prism of the current recession. Findings – While full privatization under the pressure of the economic crisis is very likely to yield significantly negative results, a transformation into a water cooperative might provide a viable solution. Research limitations/implications – Water cooperatives provide a solution for water distribution that is friendly for the consumer, the society and the environment. Practical implications – Application of a cooperative method of water provision in Greece could be a springboard for the use of the model in other areas. Originality/value – The article evaluates the privatization and cooperativization attempt of EYATH S.A. based on previous related research and considering Greece ' s current conditions.

Sign in / Sign up

Export Citation Format

Share Document