Design and implementation of artificial magnetic conductor surface as decoupling structure in microstrip antenna arrays

Circuit World ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Khader Zelani Shaik ◽  
Siddaiah P. ◽  
K. Satya Prasad

Purpose Millimeter wave spectrum represents new opportunities to add capacity and faster speeds for next-generation services as fifth generation (5G) applications. In its Spectrum Frontiers proceeding, the Federal Communications Commision decided to focus on spectrum bands where the most spectrums are potentially available. A low profile antenna array with new decoupling structure is proposed and expected to resonate at higher frequency bands, i.e. millimeter wave frequencies, which are suitable for 5G applications. Design/methodology/approach The presented antenna contains artificial magnetic conductor (AMC) surface as decoupling structure. The proposed antenna array with novel AMC surface is operating at 29.1GHz and proven to be decoupling structure and capable of enhancing the isolation by reducing mutual coupling as 8.7dB between the array elements. It is evident that, and overall gain is improved as 10.1% by incorporating 1x2 Array with AMC Method. Mutual coupling between the elements of 1 × 2 antenna array is decreased by 39.12%. Findings The proposed structure is designed and simulated using HFSS software and the results are obtained in terms of return loss, gain, voltage standing wave ratio (VSWR) and mutual coupling. The S-Parameters of each stage of design is tabulated and compared with each other to prove the decoupling capability of AMC surface in antenna arrays. Originality/value The proposed structure is designed and simulated using HFSS software, and the results are obtained in terms of return loss, gain, VSWR and mutual coupling. The S-Parameters of each stage of design is tabulated and compared with each other to prove the decoupling capability of AMC surface in antenna arrays.

In present 4G the enormously growing of cellular user and the shortage of bandwidth which results in difficulty to provide a high data rate to each end user. To achieve wider bandwidth millimeter wave technology is considered to solve the problem of bandwidth shortage. This paper presents a 4x1 element circular phase array of inset fed rectangular patch antenna operating in the millimeter wave band (24.81GHz 33GHz). To achieve large impedance bandwidth the array is designed with edge coupled parasitic patch arrangement which provides dual resonance. The designed array used the ring-shaped sequential rotation feeding line to reduce the unwanted side lobe radiation. The design antenna array achieved good return loss – 10dB ≤ S11 ≤ – 18.64dB and maintaining 26% (24.81GHz 33GHz) bandwidth. The antenna array has achieved good return loss S11, -18.64dB at 29.09GHz and VSWR ≤ 1.85 (24.81GHz-33GHz). In millimeter wave wireless communication require high gain antenna to overcome the problem of path loss. The designed array has achieved 10.14dB gain. So the designed will be suitable for the future millimeter-wave wireless communication system.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
D.D. Devisasi Kala ◽  
D. Thiripura Sundari

PurposeOptimization involves changing the input parameters of a process that is experimented with different conditions to obtain the maximum or minimum result. Increasing interest is shown by antenna researchers in finding the optimum solution for designing complex antenna arrays which are possible by optimization techniques.Design/methodology/approachDesign of antenna array is a significant electro-magnetic problem of optimization in the current era. The philosophy of optimization is to find the best solution among several available alternatives. In an antenna array, energy is wasted due to side lobe levels which can be reduced by various optimization techniques. Currently, developing optimization techniques applicable for various types of antenna arrays is focused on by researchers.FindingsIn the paper, different optimization algorithms for reducing the side lobe level of the antenna array are presented. Specifically, genetic algorithm (GA), particle swarm optimization (PSO), ant colony optimization (ACO), cuckoo search algorithm (CSA), invasive weed optimization (IWO), whale optimization algorithm (WOA), fruitfly optimization algorithm (FOA), firefly algorithm (FA), cat swarm optimization (CSO), dragonfly algorithm (DA), enhanced firefly algorithm (EFA) and bat flower pollinator (BFP) are the most popular optimization techniques. Various metrics such as gain enhancement, reduction of side lobe, speed of convergence and the directivity of these algorithms are discussed. Faster convergence is provided by the GA which is used for genetic operator randomization. GA provides improved efficiency of computation with the extreme optimal result as well as outperforming other algorithms of optimization in finding the best solution.Originality/valueThe originality of the paper includes a study that reveals the usage of the different antennas and their importance in various applications.


2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Ke Gong ◽  
Xue Hui Hu ◽  
Peng Hu ◽  
Bing Jie Deng ◽  
You Chao Tu

A series-fed linear substrate-integrated dielectric resonator antenna array (SIDRAA) is presented for millimeter-wave applications, in which the substrate-integrated dielectric resonator antenna (SIDRA) elements and the feeding structure can be codesigned and fabricated using the same planar process. A prototype 4 × 1 SIDRAA is designed at Ka-band and fabricated with a two-layer printed circuit board (PCB) technology. Four SIDRAs are implemented in the Rogers RT6010 substrate using the perforation technique and fed by a compact substrate-integrated waveguide (SIW) through four longitudinal coupling slots within the Rogers RT5880 substrate. The return loss, radiation patterns, and antenna gain were experimentally studied, and good agreement between the measured and simulated results is observed. The SIDRAA example provides a bandwidth of about 10% around 34.5 GHz for 10 dB return loss and stable broadside radiation patterns with the peak gain of 10.5–11.5 dBi across the band.


2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Oluwole John Famoriji ◽  
Thokozani Shongwe

To obtain an antenna array with isotropic radiation, spherical antenna array (SAA) is the right array configuration. The challenges of locating signals transmitted within the proximity of antenna array have been investigated considerably in the literature. However, near-field (NF) source localization of signals has hitherto not been investigated effectively using SAA in the presence of mutual coupling (MC). MC is another critical problem in antenna arrays. This paper presents an NF range and direction-of-arrival (DoA) estimation technique via the direction-independent and signal invariant spherical harmonics (SH) characteristics in the presence of mutual coupling. The energy of electromagnetic (EM) signal on the surface of SAA is captured successfully using a proposed pressure interpolation approach. The DoA estimation within the NF region is then calculated via the distribution of pressure. The direction-independent and signal invariant characteristics, which are SH features, are obtained using the DoA estimates in the NF region. We equally proposed a learning scheme that uses the source activity detection and convolutional neural network (CNN) to estimate the range of the NF source via the direction-independent and signal invariant features. Considering the MC problem and using the DoA estimates, an accurate spectrum peak in the multipath situation in conjunction with MC and a sharper spectrum peak from a unique MC structure and smoothing algorithms are obtained. For ground truth performance evaluation of the SH features within the context of NF localization, a numerical experiment is conducted and measured data were used for analysis to incorporate the MC and consequently computed the root mean square error (RMSE) of the source range and NF DoA estimate. The results obtained from numerical experiments and measured data indicate the validity and effectiveness of the proposed approach. In addition, these results are motivating enough for the deployment of the proposed method in practical applications.


2020 ◽  
Vol 9 (1) ◽  
pp. 1722-1725

To improve the antenna characteristics in terms of bandwidth, gain and its radiation characteristics without providing any phase reflections, Artificial Magnetic Conductor (AMC) are used in antenna designing. This paper initially designed AMC structure for 2.4GHz frequency. The proposed AMC structure consists of three L shaped and inverted L shaped slots and provides zero degrees phase reflection at 2.4GHz resonant frequency. This proposed AMC structure is incorporated on conventional micro strip square patch antenna and results are simulated in High Frequency Structure Simulator (HFSS) software. The Proposed AMC incorporated patch antenna, return loss is improved from -16.16dB to -31.75dB, VSWR is from 1.42 to 1.05, the band width is increased from 16.5 MHz to 348.1 MHz This design resonates at a frequency of 2.4GHz and applicable to Wi-Fi applications.


2021 ◽  
Vol 14 (2) ◽  
pp. 186-198
Author(s):  
Ravi Tej D ◽  
Sri Kavya Ch K ◽  
Sarat K. Kotamraju

PurposeThe purpose of this paper is to improve energy efficiency and further reduction of side lobe level the algorithm proposed is firework algorithm. In this paper, roused by the eminent swarm conduct of firecrackers, a novel multitude insight calculation called fireworks algorithm (FA) is proposed for work enhancement. The FA is introduced and actualized by mimicking the blast procedure of firecrackers. In the FA, two blast (search) forms are utilized and systems for keeping decent variety of sparkles are likewise all around planned. To approve the presentation of the proposed FA, correlation tests were led on nine benchmark test capacities among the FA, the standard PSO (SPSO) and the clonal PSO (CPSO).Design/methodology/approachThe antenna arrays are used to improve the capacity and spectral efficiency of wireless communication system. The latest communication systems use the antenna array technology to improve the spectral efficiency, fill rate and the energy efficiency of the communication system can be enhanced. One of the most important properties of antenna array is beam pattern. A directional main lobe with low side lobe level (SLL) of the beam pattern will reduce the interference and enhance the quality of communication. The classical methods for reducing the side lobe level are differential evolution algorithm and PSO algorithm. In this paper, roused by the eminent swarm conduct of firecrackers, a novel multitude insight calculation called fireworks algorithm (FA) is proposed for work enhancement. The FA is introduced and actualized by mimicking the blast procedure of firecrackers. In the FA, two blast (search) forms are utilized and systems for keeping decent variety of sparkles are likewise all around planned. To approve the presentation of the proposed FA, correlation tests were led on nine benchmark test capacities among the FA, the standard PSO (SPSO) and the clonal PSO (CPSO). It is demonstrated that the FA plainly beats the SPSO and the CPSO in both enhancement exactness and combination speed. The results convey that the side lobe level is reduced to −34.78dB and fill rate is increased to 78.53.FindingsSamples including 16-element LAAs are conducted to verify the optimization performances of the SLL reductions. Simulation results show that the SLLs can be effectively reduced by FA. Moreover, compared with other benchmark algorithms, fireworks has a better performance in terms of the accuracy, the convergence rate and the stability.Research limitations/implicationsWith the use of algorithms radiation is prone to noise one way or other. Even with any optimizations we cannot expect radiation to be ideal. Power dissipation or electro magnetic interference is bound to happen, but the use of optimization algorithms tries to reduce them to the extent that is possible.Practical implications16-element linear antenna array is available with latest versions of Matlab.Social implicationsThe latest technologies and emerging developments in the field of communication and with exponential growth in users the capacity of communication system has bottlenecks. The antenna arrays are used to improve the capacity and spectral efficiency of wireless communication system. The latest communication systems use the antenna array technology which is to improve the spectral efficiency, fill rate and the energy efficiency of the communication system can be enhanced.Originality/valueBy using FA, the fill rate is increased to 78.53 and the side lobe level is reduced to 35dB, when compared with the bench mark algorithms.


Sign in / Sign up

Export Citation Format

Share Document