Flow characteristics of dusts dispersed by high-pressure air blast in 20 L chamber

2015 ◽  
Vol 32 (3) ◽  
pp. 742-765 ◽  
Author(s):  
Jiachen Chen ◽  
Qi Zhang
Keyword(s):  
Numerical Simulation ◽  
High Pressure ◽  
Dust Cloud ◽  
Dust Particles ◽  
Dust Explosion ◽  
Air Blast ◽  
Content Type ◽  
Uniform Dispersion ◽  
Dust Dispersion ◽  
Dust Distribution

Purpose – A dust cloud is formed by a high-pressure air blast in dust explosion experiments in the spherical 20 L chamber. The state of the dust cloud has a significant impact on the dust explosion. However, it is difficult to observe the dust distribution in the chamber during the dust dispersion. Numerical simulation was used to examine the dust distribution in the chamber with the rebound nozzle in this work. The paper aims to discuss these issues. Design/methodology/approach – Through a series numerical simulations, the influences of the dust particle size and the pressure for dust dispersion on the have been analyzed, and the results are discussed. Findings – Dust in the spherical 20 L chamber is in the state of very intensifying motion within 30 ms from dispersion starting. Dust in the chamber reaches a uniform state beyond 200 ms. The pressure for dust dispersion should be higher than 0.5 MPa for the aluminum dusts of larger than 50. The higher blast pressure is not always applicable to achieve a uniform dispersion. There is a best blast pressure value for a given dust to achieve a uniform dispersion in the spherical 20 L chamber. Research limitations/implications – Dust cloud generation is essential for understanding dust explosions. Dust cloud deflagration parameters depend on the uniformity and concentration of dusts dispersed by a high-pressure air blast. Numerical simulation was used to examine the multiphase flow of the dust air mixture in this work. Through a series numerical simulations, the influences of the dust particle size and the pressure for dust dispersion on the have been analyzed, and the results are discussed. The data are useful for understanding the basics of dust cloud formation. Practical implications – The data are useful for evaluating dust explosion experimental parameters. Originality/value – Dispersible uniformity has a strong impact on measured parameters of dust explosion in a chamber. However, it is difficult to observe the dust particles distribution during the dispersion. Numerical simulation was used to examine the dust particles distribution and its influencing factors during the dispersion in this work. New finding is: the approach to examine the distribution of dust particles dispersed by a high-pressure blast in a chamber; the variation of dispersible uniformity and its influencing factors when dust is injected into the spherical 20 L chamber by high-pressure air blast.

scholarly journals Numerical simulation of dust explosion in the spherical 20l vessel

2015 ◽  
Vol 63 (1) ◽  
pp. 289-293 ◽  
Author(s):  
Z. Salamonowicz ◽  
M. Kotowski ◽  
M. Półka ◽  
W. Barnat
Keyword(s):  
Numerical Simulation ◽  
Numerical Simulations ◽  
Combustion Process ◽  
Test Stand ◽  
Maximum Pressure ◽  
Dust Explosion ◽  
Computational Domain ◽  
Dispersion Process ◽  
Dust Dispersion ◽  
Positive Agreement

Abstract The paper presents experimental and numerical validation of the combustion process of coal and flour dust dispersed in a spherical chamber of 20 cubic decimetres volume. The aim of the study is to validate the numerical simulation results in relation to the experimental data obtained on the test stand. To perform the numerical simulations, a Computational Fluid Dynamics code FLUENT was used. Geometry of the computational domain was built in compliance with EN 14460. Numerical simulations were divided into two main steps. The first one consists in a dust dispersion process, where influence of standardized geometry was verified. The second part of numerical simulations investigated dust explosion characteristics in compliance with EN 14034. After several model modifications, outcomes of the numerical analysis shows positive agreement with both, the explosion characteristics for different dust concentration levels and the maximum pressure increase obtained on the test stand.

Visualization Study of Dust Dispersion Process in Siwek 20-L Device for Dust Explosion Test

2014 ◽  
Vol 590 ◽  
pp. 266-270 ◽  
Author(s):  
Bing Du ◽  
Wei Xing Huang ◽  
Nian Sheng Kuai ◽  
Jing Jie Yuan ◽  
Long Liu ◽  
...  
Keyword(s):  
High Speed ◽  
Dust Cloud ◽  
Control Valve ◽  
Processing Technique ◽  
Dust Explosion ◽  
Spherical Vessel ◽  
Dispersion Process ◽  
Visualization System ◽  
Dust Dispersion ◽  
Explosion Test

A visualization method is proposed in order to characterize the dispersion process of dust cloud in Siwek 20-L explosion device. The visualization system consists of a transparent spherical vessel, a dust dispersion device, a high precision control valve and a high-speed camera. Experiment with wheat flour powder indicate that the non-uniformity of dust cloud in space and time can be clearly distinguished based on the frame pictures, as well as the evolution of particles settlement with time after dispersion. Moreover, qualitative analysis based on picture processing technique was carried out to obtain the transmission data of dust cloud from the frame pictures. Results show that the transmission changes rapidly with time and reaches to the minimum value at about 60 ms after dispersion, and with this time, the optimum ignition delay time can be determined for dust explosion test in Siwek 20-L device.

NUMERICAL SIMULATION OF THE COMPACTION EFFECT DURING SHOCK WAVE € PARTICLE LAYER NUMERICAL SIMULATION OF THE COMPACTION EFFECT DURING SHOCK WAVE-PARTICLE LAYER INTERACTION

2020 ◽  
Author(s):  
YA. E. POROSHYNA ◽  
◽  
P. S. UTKIN ◽  
Keyword(s):  
Numerical Simulation ◽  
Shock Wave ◽  
Dust Explosion ◽  
Dense Particle ◽  
Layer Interaction ◽  
Particle Layer ◽  
Complex Process ◽  
Impermeable Wall

The problem of shock wave - dense particle layer interaction is a fundamental basis for the study of a more complex process of dust explosion or dust-layered detonation. The work presents results of numerical simulation of the experiment on interaction of an SW with particles layer deposited on the impermeable wall.

Numerical simulation of gas-solid two-phase reaction flow with multiple moving boundaries

2015 ◽  
Vol 25 (2) ◽  
pp. 375-390 ◽  
Author(s):  
Qiao Luo ◽  
Xiaobing Zhang
Keyword(s):  
Numerical Simulation ◽  
Physical Phenomenon ◽  
Great Influence ◽  
Moving Boundaries ◽  
Charge Weight ◽  
Phase Reaction ◽  
Two Phase ◽  
Content Type ◽  
One Dimensional ◽  
Chamber Volume

Purpose – In engineering applications, gas-solid two-phase reaction flow with multi-moving boundaries is a common phenomenon. The launch process of multiple projectiles is a typical example. The flow of adjacent powder chambers is coupled by projectile’s motion. The purpose of this paper is to study this flow by numerical simulation. Design/methodology/approach – A one-dimensional two-phase reaction flow model and MacCormack difference scheme are implemented in a computational code, and the code is used to simulate the launch process of a system of multiple projectiles. For different launching rates and loading conditions, the simulated results of the launch process of three projectiles are obtained and discussed. Findings – At low launching rates, projectiles fired earlier in the series have little effect on the launch processes of projectiles fired later. However, at higher launching rates, the projectiles fired first have a great influence on the launch processes of projectiles fired later. As the launching rate increases, the maximum breech pressure for the later projectiles increases. Although the muzzle velocities increase initially, they reach a maximum at some launching rate, and then decrease rapidly. The muzzle velocities and maximum breech pressures of the three projectiles have an approximate linear relationship with the charge weight, propellant web size and chamber volume. Originality/value – This paper presents a prediction tool to understand the physical phenomenon of the gas-solid two-phase reaction flow with multi-moving boundaries, and can be used as a research tool for future interior ballistics studies of launch system of multiple projectiles.

Numerical simulation of coupled liquid water, stress and heat for frozen soil in the thawing process

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wei Xiao ◽  
Enlong Liu ◽  
Xiao Yin ◽  
Guike Zhang ◽  
Chong Zhang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Water Content ◽  
Coupled Model ◽  
Frozen Soil ◽  
Water Migration ◽  
Overburden Pressure ◽  
Content Type ◽  
Thawing Process ◽  
Sample Water ◽  
The One

PurposeThe purpose of this paper is to perform the thermo-hydro-mechanical (THM) numerical analysis in order to study the thawing process for frozen soil and to predict the thawing settlement.Design/methodology/approachA new one-dimensional multi-field physical coupled model was proposed here to describe the thawing process of saturated frozen soil, whereby the void ratio varied linearly with effective stress (Eq. 10) and hydraulic conductivity (Eq. 27b). The thawing process was simulated with different initial and boundary conditions in an open system with temperature variations. The mechanical behavior and water migration of the representative cases were also investigated.FindingsThe comparisons of representative cases with experimental data demonstrated that the model predicts thawing settlement well. It was found that the larger temperature gradient, higher overburden pressure and higher water content could lead to larger thawing settlement. The temperature was observed that to distribute height linearly in both frozen zone and unfrozen zone of the sample. Water migration forced to a decrease in the water content of the unfrozen zone and an increase in water content at the thawing front.Research limitations/implicationsIn this study, only the one-directional thawing processes along the frozen soil samples were investigated numerically and compared with test results, which can be extended to two-dimensional analysis of thawing process in frozen soil.Originality/valueThis study helps to understand the thawing process of frozen soil by coupled thermo-hydro-mechanical numerical simulation.

Impact of high pressure processing on microbiological, nutritional and sensory properties of food: a review

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ajith Amsasekar ◽  
Rahul S. Mor ◽  
Anand Kishore ◽  
Anupama Singh ◽  
Saurabh Sid
Keyword(s):  
High Pressure ◽  
Food Quality ◽  
High Pressure Processing ◽  
Microbial Inactivation ◽  
Sensory Properties ◽  
Process Conditions ◽  
Processed Food ◽  
Content Type ◽  
Food Properties ◽  
The Impact

Purpose The increased demand for high-quality, nutritionally rich processed food has led to non-thermal food processing technologies like high pressure processing (HPP), a novel process for microbial inactivation with minimal loss of nutritional and sensory properties. The purpose of this paper is to highlight the impact of HPP on the microbiological, nutritional and sensory properties of food. Design/methodology/approach Recent research on the role of HPP in maintaining food quality and safety and the impact of process conditions with respect to various food properties have been explored in this paper. Also, the hurdle approach and the effectiveness of HPP on food quality have been documented. Findings HPP has been verified for industrial application, fulfilling the consumer demand for processed food with minimum nutrition loss at low temperatures. The positive impact of HPP with other treatments is known as the hurdle approach that enhances its impact against microorganism activity and minimizes the effects on nutrition and sensory attributes. Originality/value This paper highlights the impact of HPP on various food properties and a good alternative as non-thermal technology for maintaining shelf life, sensory properties and retention of nutrients.

Sign in / Sign up

Export Citation Format

Share Document