Effects of hydrogen flow rate, injection pressure and EGR on performance of common rail direct injection (CRDi) engine in dual fuel mode

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
S.V. Khandal ◽  
T.M. Yunus Khan ◽  
Sarfaraz Kamangar ◽  
Maughal Ahmed Ali Baig ◽  
Salman Ahmed N J
Keyword(s):  
Diesel Engine ◽  
Flow Rate ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection Pressure ◽  
Dual Fuel ◽  
Injection Timing ◽  
Oxides Of Nitrogen ◽  
Content Type ◽  
Hydrogen Flow

PurposeThe different performance tests were conducted on diesel engine compression ignition (CI) mode and CRDi engine.Design/methodology/approachThe CI engine was suitably modified to CRDi engine with Toroidal re-entrant combustion chamber (TRCC) and was run in dual-fuel (DF) mode. Hydrogen (H2) was supplied at different flow rates during the suction stroke, and 0.22 Kg/h of hydrogen fuel flow rate (HFFR) was found to be optimum. Diesel and biodiesel were used as pilot fuels. The CRDi engine with DF mode was run at various injection pressures, and 900 bar was found to be optimum injection pressure (IP) with 10o before top dead center (bTDC) as fuel injection timing (IT).FindingsThese operating engine conditions increased formation of oxides of nitrogen (NOx), which were reduced by exhaust gas recycle (EGR). With EGR of 15%, CRDi engine resulted in 12.6% lower brake thermal efficiency (BTE), 5.5% lower hydrocarbon (HC), 7.7% lower carbon monoxide (CO), 26% lower NOx at 80% load as compared to the unmodified diesel engine (CI mode).Originality/valueThe current research is an effort to study and evaluate the performance of CRDi engine in DF mode with diesel-H2 and BCPO-H2 fuel combinations with TRCC.

Optimization of injection parameters for ethanol blends of plastic oil in VCR engine using RSM and ANN

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Datta Bharadwaz Yellapragada ◽  
Govinda Rao Budda ◽  
Kavya Vadavelli
Keyword(s):  
Compression Ratio ◽  
Fuel Injection ◽  
Injection Pressure ◽  
Operating Parameters ◽  
Injection Timing ◽  
Oxides Of Nitrogen ◽  
Operational Parameters ◽  
Content Type ◽  
Injection Parameters ◽  
Ethanol Blends

Purpose The present work aims at improving the performance of the engine using optimized fuel injection strategies and operating parameters for plastic oil ethanol blends. To optimize and predict the engine injection and operational parameters, response surface methodology (RSM) and artificial neural networks (ANN) are used respectively. Design/methodology/approach The engine operating parameters such as load, compression ratio, injection timing and the injection pressure are taken as inputs whereas brake thermal efficiency (BTHE), brake-specific fuel consumption (BSFC), carbon monoxide (CO), hydrocarbons (HC), oxides of nitrogen (NOx) and smoke emissions are treated as outputs. The experiments are designed according to the design of experiments, and optimization is carried out to find the optimum operational and injection parameters for plastic oil ethanol blends in the engine. Findings Optimum operational parameters of the engine when fuelled with plastic oil and ethanol blends are obtained at 8 kg of load, injection pressure of 257 bar, injection timing of 17° before top dead center and blend of 15%. The engine performance parameters obtained at optimum engine running conditions are BTHE 32.5%, BSFC 0.24 kg/kW.h, CO 0.057%, HC 10 ppm, NOx 324.13 ppm and smoke 79.1%. The values predicted from ANN are found to be more close to experimental values when compared with the values of RSM. Originality/value In the present work, a comparative analysis is carried out on the prediction capabilities of ANN and RSM for variable compression ratio engine fuelled with ethanol blends of plastic oil. The error of prediction for ANN is less than 5% for all the responses such as BTHE, BSFC, CO and NOx except for HC emission which is 12.8%.

Factors Affecting Performance of Dual Fuel Compression Ignition Engines

2013 ◽  
Vol 388 ◽  
pp. 217-222
Author(s):  
Mohamed Mustafa Ali ◽  
Sabir Mohamed Salih
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection System ◽  
Dual Fuel ◽  
Injection Timing ◽  
Compression Ignition ◽  
Factors Affecting

Compression Ignition Diesel Engine use Diesel as conventional fuel. This has proven to be the most economical source of prime mover in medium and heavy duty loads for both stationary and mobile applications. Performance enhancements have been implemented to optimize fuel consumption and increase thermal efficiency as well as lowering exhaust emissions on these engines. Recently dual fueling of Diesel engines has been found one of the means to achieve these goals. Different types of fuels are tried to displace some of the diesel fuel consumption. This study is made to identify the most favorable conditions for dual fuel mode of operation using Diesel as main fuel and Gasoline as a combustion improver. A single cylinder naturally aspirated air cooled 0.4 liter direct injection diesel engine is used. Diesel is injected by the normal fuel injection system, while Gasoline is carbureted with air using a simple single jet carburetor mounted at the air intake. The engine has been operated at constant speed of 3000 rpm and the load was varied. Different Gasoline to air mixture strengths investigated, and diesel injection timing is also varied. The optimum setting of the engine has been defined which increased the thermal efficiency, reduced the NOx % and HC%.

Multizone Phenomenological Modeling of Combustion and Emissions for Multiple-Injection Common Rail Direct Injection Diesel Engines

2016 ◽  
Vol 138 (12) ◽  
Author(s):  
S Rajkumar ◽  
Shamit Bakshi ◽  
Pramod S Mehta
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection Pressure ◽  
Common Rail ◽  
Zone Model ◽  
Oxides Of Nitrogen ◽  
Multiple Injection ◽  
Start Of Injection ◽  
Wide Range

Common rail direct injection (CRDI) system is a modern variant of direct injection diesel engine featuring higher fuel injection pressure and flexible injection scheduling which involves two or more pulses. Unlike a conventional diesel engine, the CRDI engine provides simultaneous reduction of oxides of nitrogen and smoke with an injection schedule that has optimized start of injection, fuel quantity in each injection pulse, and dwell periods between them. In this paper, the development of a multizone phenomenological model used for predicting combustion and emission characteristics of multiple injection in CRDI diesel engine is presented. The multizone spray configuration with their temperature and composition histories predicted on phenomenological spray growth and mixing considerations helps accurate prediction of engine combustion and emission (nitric oxide and soot) characteristics. The model predictions of combustion and emissions for multiple injection are validated with measured values over a wide range of speed and load conditions. The multizone and the two-zone model are compared and the reasons for better comparisons for the multizone model with experimental data are also explored.

Effect of Injection Timing on Performance, Combustion and Emission Characteristics of Dairy Scum Methyl Esters in CRDI Engine

2020 ◽  
Vol 12 (4) ◽  
Author(s):  
M. Nandeesh ◽  
R. Harishkumar ◽  
C.R. Rajashekar ◽  
N.R. Banapurmath ◽  
V.S. Yaliwal
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Methyl Esters ◽  
Direct Injection ◽  
Injection Pressure ◽  
Injection Timing ◽  
Emission Characteristics ◽  
Single Cylinder ◽  
Diesel Fuels ◽  
Fuel Injection Timing

The conventional diesel fuels are depleting at a faster pace. To reduce the burden on the economy, the reserves and sources for future has to be limited. The use of biodiesel derivatives from various sources and its blends in diesel engine has gained more importance in recent years. The present work investigates the feasibility of using dairy scum methyl esters (DSOME) of B20 blend in a modified single cylinder of common rail direct injection (CRDI) engine at a constant speed. Experiments were carried out at different injection timings from 25deg BTDC to 5deg ATDC with constant injection pressure as 600 bar. The fuel injection timing plays an important role in evaluating the performance, emission and combustion characteristics of the engine. The results show that the performance is improved with retarded injection timings compared to the operation of single cylinder DI engine fuelled with DSOME B20 biodiesel.

A phenomenological combustion analysis of a dual-fuel natural-gas diesel engine

2016 ◽  
Vol 231 (1) ◽  
pp. 66-83 ◽  
Author(s):  
Shuonan Xu ◽  
David Anderson ◽  
Mark Hoffman ◽  
Robert Prucka ◽  
Zoran Filipi
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Heat Release ◽  
Diesel Fuel ◽  
Fuel Injection ◽  
Dual Fuel ◽  
Injection Timing ◽  
Heavy Duty ◽  
Engine System ◽  
Wiebe Function

Energy security concerns and an abundant supply of natural gas in the USA provide the impetus for engine designers to consider alternative gaseous fuels in the existing engines. The dual-fuel natural-gas diesel engine concept is attractive because of the minimal design changes, the ability to preserve a high compression ratio of the baseline diesel, and the lack of range anxiety. However, the increased complexity of a dual-fuel engine poses challenges, including the knock limit at a high load, the combustion instability at a low load, and the transient response of an engine with directly injected diesel fuel and port fuel injection of compressed natural gas upstream of the intake manifold. Predictive simulations of the complete engine system are an invaluable tool for investigations of these conditions and development of dual-fuel control strategies. This paper presents the development of a phenomenological combustion model of a heavy-duty dual-fuel engine, aided by insights from experimental data. Heat release analysis is carried out first, using the cylinder pressure data acquired with both diesel-only and dual-fuel (diesel and natural gas) combustion over a wide operating range. A diesel injection timing correlation based on the injector solenoid valve pulse widths is developed, enabling the diesel fuel start of injection to be detected without extra sensors on the fuel injection cam. The experimental heat release trends are obtained with a hybrid triple-Wiebe function for both diesel-only operation and dual-fuel operation. The ignition delay period of dual-fuel operation is examined and estimated with a predictive correlation using the concept of a pseudo-diesel equivalence ratio. A four-stage combustion mechanism is discussed, and it is shown that a triple-Wiebe function has the ability to represent all stages of dual-fuel combustion. This creates a critical building block for modeling a heavy-duty dual-fuel turbocharged engine system.

Investigations on performance of diesel engine by varying injection timings with design modification on piston crown

2018 ◽  
Vol 15 (5) ◽  
pp. 562-566
Author(s):  
Vijaya K. ◽  
Shailesh Palaparty ◽  
Raghavan Srinivasa ◽  
Ravi Kumar Puli
Keyword(s):  
Diesel Engine ◽  
Injection Pressure ◽  
Combustible Mixture ◽  
Injection Timing ◽  
Connecting Rod ◽  
Design Modification ◽  
Content Type ◽  
Piston Head ◽  
Piston Crown ◽  
Fuel Vaporization

Purpose Investigations are carried out with the aim of improving performance of a diesel engine with the design modification on piston crown to stimulate the uniform combustion by inducing turbulence in the incoming charge. Design/methodology/approach A stirrer is introduced at the top of the piston so as to inculcate more turbulence to the incoming charge by improving the rate of fuel vaporization. Whirling motion is created in the combustible mixture by providing rotating blades on the cavity/bowl of the reciprocating piston head. By putting a simple link mechanism, the oscillatory motion of connecting rod will rotate the blade by an angle of 60°. Findings The investigations are carried out with and without swirl piston at 17.5 compression ratio and 200 bar injection pressure by varying injection timings. Originality/value Finally, the result shows that by using the modified piston, nearly 3 per cent of efficiency increased and 31 per cent of NOx emissions are reduced compared to that of a normal piston with 80 per cent load at standard injection timing.

Characterization of the Nonroad Modified Diesel Engine Using a Novel Entropy-VIKOR Approach: Experimental Investigation and Numerical Simulation

2019 ◽  
Vol 141 (8) ◽  
Author(s):  
Pushpendra Kumar Sharma ◽  
Dilip Sharma ◽  
Shyam Lal Soni ◽  
Amit Jhalani
Keyword(s):  
Numerical Simulation ◽  
Diesel Engine ◽  
Engine Performance ◽  
Injection Pressure ◽  
Multicriteria Decision Making ◽  
Operating Parameters ◽  
Injection Timing ◽  
Oxides Of Nitrogen ◽  
Compression Ignition Engine ◽  
Continuous Increase

Excessive use of diesel engines and continuous increase in environmental pollution has drawn the attention of researchers in the area of the compression ignition engine. In this research article, an innovative investigation of the nonroad modified diesel engine is reported with the effective use of the hybrid Entropy-VIKOR approach. Hence, it becomes necessary to prioritize and optimize the performance defining criteria, which provides higher BTE along with lower emission simultaneously. The engine load, injection timing (Inj Tim), injection pressure (Inj Pre), and compression ratio (Com R) were selected as engine operating parameters for experimentation at the constant speed of 1500 rpm engine. The effect on engine performance parameters (BTE and BSEC) and emission (carbon monoxide (CO), total oxide of carbon (TOC), oxides of nitrogen (NOx), hydrocarbon (HC), and smoke) was studied experimentally. The optimum results were observed at load 10.32 kg, Inj Tim 20 deg btdc, Inj Pre 210 bar, and Com R 21:1 at which highest BTE of 22.24% and lowest BSEC of 16,188.5 kJ/kWh were obtained. Hybrid entropy-VIKOR approach was applied to establish the optimum ranking of the nonroad modified diesel engine. The experimental results and numerical simulation show that optimizing the engine operating parameters using the entropy-VIKOR multicriteria decision-making (MCDM) technique is applicable.

Sign in / Sign up

Export Citation Format

Share Document