Impact of heat generation/absorption on the unsteady magnetohydrodynamic stagnation point flow and heat transfer of nanofluids

2019 ◽  
Vol 30 (2) ◽  
pp. 557-574 ◽  
Author(s):  
Rahimah Jusoh ◽  
Roslinda Nazar ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Shear Stress ◽  
Stability Analysis ◽  
Unsteady Flow ◽  
Heat Generation ◽  
Volume Fraction ◽  
Nanoparticle Volume Fraction ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this study is to describe the unsteady three-dimensional magnetohydrodynamic stagnation point flow of nanofluids with heat generation/absorption. Design/methodology/approach The comprehensive numerical simulations in this study accommodate a physical insight into the heat transfer and flow problem. The use of finite difference method through the bvp4c function in Matlab provides the numerical results and graphical illustrations for the heat transfer rate and shear stress. Findings Dual solutions are discovered in this study. Thus, stability analysis is implemented and the first solution complies the stability behavior. Silver nanoparticles dominate the highest thermal conductivity. Accretion of the rate of heat transfer is obtained with an increment in the magnitude of heat absorption, suction parameter and nanoparticle volume fraction. A stronger magnetic field and larger unsteadiness parameter contribute to the increase of the surface shear stress. Practical implications Many practical fluid mechanics problems involve the time-dependent element. Practically, an unsteady flow of nanofluid can be implemented in the micro-manufacturing, periodic heat exchanges process, nano drug delivery system and nuclear reactors. Originality/value In spite of numerous studies on the unsteady flow, none of the researchers combined the effect of heat generation/absorption and magnetic field in the nanofluid model. The behavior of the flow and heat transfer have been analyzed thoroughly with the variations in the unsteadiness parameter, heat source/sink and nanoparticle volume fraction. Moreover, the discovery of dual solutions in this model strengthens the novelty of this study. Subsequently, the implementation of stability analysis leads to a remarkable revelation where the first solution is found to be stable.

Effect of MHD on the flow and heat transfer characteristics of nanofluid in a grooved channel with internal heat generation

2019 ◽  
Vol 29 (4) ◽  
pp. 1403-1431 ◽  
Author(s):  
Mohammad Sadegh Dehghani ◽  
Davood Toghraie ◽  
Babak Mehmandoust
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Generation ◽  
Volume Fraction ◽  
Convective Heat Transfer Coefficient ◽  
Internal Heat ◽  
Reynolds Numbers ◽  
Internal Heat Generation ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this study is numerical simulation of magnetohydrodynamics (MHD) water–Al2O3 nanofluid mixed convection in a grooved channel with internal heat generation in solid cylinders. Simulations were carried out at Reynolds numbers 50 ≤ Re ≤ 100, Hartmann numbers 0 ≤ Ha ≤ 15, Grashof numbers 5,000 ≤ Gr ≤ 10−4 and volume fraction 0 ≤ φ ≤ 0.04. The effect of Reynolds number and the influence of magnetic field and pressure drop on convective heat transfer coefficient were studied in different volume fractions of nanoparticles at different Reynolds numbers. Design/methodology/approach The results show that average Nusselt number increases by increasing Reynolds and Hartman numbers. Also, when Hartman number increases, velocity profile becomes asymmetric. Pressure distribution shows that magnetic field applies Lorentz force at opposite direction of the flow, which causes asymmetric distribution of pressure. As a result, pressure in the upper half of the cylinder is higher than the lower half. Finally, velocity and temperature contours along the channel for different Hartmann numbers, volume fraction 3 per cent, Re = 50 and 100 and Gr = 10,000, are presented. Findings The effect of Reynolds number and the influence of magnetic field and pressure drop on convective heat transfer coefficient were studied in different volume fractions of nanoparticles at different Reynolds numbers. Originality/value Effect of MHD on the flow and heat transfer characteristics of Water–Al2O3 nanofluid in a grooved channel with internal heat generation in solid cylinders.

Effect of adding nanoparticle on squeezing flow and heat transfer improvement using KKL model

2017 ◽  
Vol 27 (7) ◽  
pp. 1535-1553 ◽  
Author(s):  
M. Sheikholeslami ◽  
D.D. Ganji
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nusselt Number ◽  
Heat Transfer Enhancement ◽  
Volume Fraction ◽  
Nanoparticle Volume Fraction ◽  
Transfer Enhancement ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Squeeze Number

Purpose Nanofluid flow which is squeezed between parallel plates is studied using differential transformation method (DTM). The fluid in the enclosure is water containing different types of nanoparticles: Al2O3 and CuO. The effective thermal conductivity and viscosity of nanofluid are calculated by Koo–Kleinstreuer–Li (KKL) correlation. The comparison between the results from DTM and numerical method are in well agreement which proofs the capability of this method for solving such problems. Effects of the squeeze number and nanofluid volume fraction on flow and heat transfer are examined. Results indicate that Nusselt number augment with increase of the nanoparticle volume fraction. Also, it can be found that heat transfer enhancement of CuO is higher than Al2O3. Design/methodology/approach The problem of nanofluid flow which is squeezed between parallel plates is investigated analytically using DTM. The fluid in the enclosure is water containing different types of nanoparticles: Al2O3 and CuO. The effective thermal conductivity and viscosity of nanofluid are calculated by KKL correlation. In this model, effect of Brownian motion on the effective thermal conductivity is considered. The comparison between the results from DTM and numerical method are in well agreement which proves the capability of this method for solving such problems. The effect of the squeeze number and the nanofluid volume fraction on flow and heat transfer is investigated. The results show that Nusselt number increase with increase of the nanoparticle volume fraction. Also, it can be found that heat transfer enhancement of CuO is higher than Al2O3. Findings The effect of the squeeze number and the nanofluid volume fraction on flow and heat transfer is investigated. The results show that Nusselt number increase with increase of the nanoparticle volume fraction. Also, it can be found that heat transfer enhancement of CuO is higher than Al2O3. Originality/value This paper is original.

scholarly journals Overlapping Multi-Domain Spectral Method for Conjugate Problems of Conduction and MHD Free Convection Flow of Nanofluids over Flat Plates

2019 ◽  
Vol 24 (3) ◽  
pp. 75 ◽  
Author(s):  
Musawenkhosi Mkhatshwa ◽  
Sandile Motsa ◽  
Precious Sibanda
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Thermal Radiation ◽  
Surface Temperature ◽  
Skin Friction ◽  
Spectral Method ◽  
Heat Generation ◽  
Volume Fraction ◽  
Nanoparticle Volume Fraction ◽  
Flat Plates

An efficient overlapping multi-domain spectral method is used in the analysis of conjugate problems of heat conduction in solid walls coupled with laminar magnetohydrodynamic (MHD) free convective boundary layer flow of copper (Cu) water and silver (Ag) water nanofluids over vertical and horizontal flat plates. The combined effects of heat generation and thermal radiation on the flow has been analyzed by imposing a magnetic field along the direction of the flow to control the motion of electrically conducting fluid in nanoscale systems. We have assumed that the nanoparticle volume fraction at the wall may be actively controlled. The dimensionless flow equations are solved numerically using an overlapping multi-domain bivariate spectral quasilinearisation method. The effects of relevant parameters on the fluid properties are shown graphically and discussed in detail. Furthermore, the variations of the skin friction coefficient, surface temperature and the rate of heat transfer are shown in graphs and tables. The findings show that the surface temperature is enhanced due to the presence of nanoparticles in the base fluid and the inclusion of the thermal radiation, heat generation and transverse magnetic field in the system. An increase in the nanoparticle volume fraction, heat generation, thermal radiation, and magnetic field parameter enhances the nanofluid velocity and temperature while reducing the heat transfer rate. The results also indicate that the Ag–water nanofluid has higher skin friction and surface temperature than the Cu–water nanofluid, while the opposite behaviour is observed in the case of the rate of heat transfer. The computed numerical results are compared with previously published results and found to be in good agreement.

Numerical study of unsteady MHD Couette flow and heat transfer of nanofluids in a rotating system with convective cooling

2016 ◽  
Vol 26 (5) ◽  
pp. 1567-1579 ◽  
Author(s):  
Ahmada Omar Ali ◽  
Oluwole Daniel Makinde ◽  
Yaw Nkansah-Gyekye
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Couette Flow ◽  
Numerical Study ◽  
Integration Scheme ◽  
Parallel Plates ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Mhd Couette Flow ◽  
Rotating Channel

Purpose – The purpose of this paper is to investigate numerically the unsteady MHD Couette flow and heat transfer of viscous, incompressible and electrically conducting nanofluids between two parallel plates in a rotating channel. Design/methodology/approach – The nanofluid is set in motion by the combined action of moving upper plate, Coriolis force and the constant pressure gradient. The channel rotates in unison about an axis normal to the plates. The nonlinear governing equations for velocity and heat transfer are obtained and solved numerically using semi-discretization, shooting and collocation (bvp4c) techniques together with Runge-Kutta Fehlberg integration scheme. Findings – Results show that both magnetic field and rotation rate demonstrate significant effect on velocity and heat transfer profiles in the system with Cu-water nanofluid demonstrating the highest velocity and heat transfer efficiency. These numerical results are in excellent agreements with the results obtained by other methods. Practical implications – This paper provides a very useful source of information for researchers on the subject of hydromagnetic nanofluid flow in rotating systems. Originality/value – Couette flow of nanofluid in the presence of applied magnetic field in a rotating channel is investigated.

Stability analysis on the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet with heat source effect

2018 ◽  
Vol 28 (11) ◽  
pp. 2650-2663 ◽  
Author(s):  
Fatinnabila Kamal ◽  
Khairy Zaimi ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Heat Source ◽  
Skin Friction ◽  
Stagnation Point ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Source Effect ◽  
Flow And Heat Transfer

PurposeThis paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and heat source effects.Design/methodology/approachThe governing partial differential equations are converted into ordinary differential equations by similarity transformations before being solved numerically using the bvp4c function built in Matlab software. Effects of suction/injection parameter and heat source parameter on the skin friction and heat transfer coefficients as well as the velocity and temperature profiles are presented in the forms of tables and graphs. A temporal stability analysis will be conducted to verify which solution is stable for the dual solutions exist for the shrinking case.FindingsThe analysis indicates that the skin friction coefficient and the local Nusselt number as well as the velocity and temperature were influenced by suction/injection parameter. In contrast, only the local Nusselt number, which represents heat transfer rate at the surface, was affected by heat source effect. Further, numerical results showed that dual solutions were found to exist for the certain range of shrinking case. Then, the stability analysis is performed, and it is confirmed that the first solution is linearly stable and has real physical implication, while the second solution is not.Practical implicationsIn practice, the study of the steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet in the presence of heat source effect is very crucial and useful. The problems involving fluid flow over stretching or shrinking surfaces can be found in many industrial manufacturing processes such as hot rolling, paper production and spinning of fibers. Owing to the numerous applications, the study of stretching/shrinking sheet was subsequently extended by many authors to explore various aspects of skin friction coefficient and heat transfer in a fluid. Besides that, the study of suction/injection on the boundary layer flow also has important applications in the field of aerodynamics and space science.Originality/valueAlthough many studies on viscous fluid has been investigated, there is still limited discoveries found on the heat source and suction/injection effects. Indeed, this paper managed to obtain the second (dual) solutions and stability analysis is performed. The authors believe that all the results are original and have not been published elsewhere.

Fluid flow and heat transfer of a stratified system during natural convection – influence of chamfered corners

2019 ◽  
Vol 29 (2) ◽  
pp. 470-486 ◽  
Author(s):  
Alireza Rahimi ◽  
Aravindhan Surendar ◽  
Aygul Z. Ibatova ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Three Dimensional ◽  
Immiscible Fluids ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to investigate the three-dimensional natural convection and entropy generation in the rectangular cuboid cavities included by chamfered triangular partition made by polypropylene. Design/methodology/approach The enclosure is filled by multi-walled carbon nanotubes (MWCNTs)-H2O nanofluid and air as two immiscible fluids. The finite volume approach is used for computation. The fluid flow and heat transfer are considered with combination of local entropy generation due to fluid friction and heat transfer. Moreover, a numerical method is developed based on three-dimensional solution of Navier–Stokes equations. Findings Effects of side ratio of triangular partitions (SR = 0.5, 1 and 2), Rayleigh number (103 < Ra < 105) and solid volume fraction (f = 0.002, 0.004 and 0.01 Vol.%) of nanofluid are investigated on both natural convection characteristic and volumetric entropy generation. The results show that the partitions can be a suitable method to control fluid flow and energy consumption, and three-dimensional solutions renders more accurate results. Originality/value The originality of this work is to study the three-dimensional natural convection and entropy generation of a stratified system.

Influence of inclined Lorentz forces through a porous media on squeezing Cu-H2o nanofluid in the presence of heat source/sink

2019 ◽  
Vol 30 (5) ◽  
pp. 2563-2581 ◽  
Author(s):  
Seyedmohammad Mousavisani ◽  
Javad Khalesi ◽  
Hossein Golbaharan ◽  
Mohammad Sepehr ◽  
D.D. Ganji
Keyword(s):  
Heat Transfer ◽  
Heat Source ◽  
Volume Fraction ◽  
Approximate Solutions ◽  
Squeezing Flow ◽  
Parallel Plates ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Variable Heat ◽  
Lorentz Forces

Purpose The purpose of this paper is to find the approximate solutions of unsteady squeezing nanofluid flow and heat transfer between two parallel plates in the presence of variable heat source, viscous dissipation and inclined magnetic field using collocation method (CM). Design/methodology/approach The partial governing equations are reduced to nonlinear ordinary differential equations by using appropriate transformations and then are solved analytically by using the CM. Findings It is observed that the enhancing values of aligned angle of the magnetic causes a reduction in temperature distribution. It is also seen that the effect of nanoparticle volume fraction is significant on the temperature but negligible on the velocity profile. Originality/value To the best of the authors’ knowledge, no research has been carried out considering the combined effects of inclined Lorentz forces and variable heat source on squeezing flow and heat transfer of nanofluid between the infinite parallel plates.

Study on the Characteristics of Flow and Heat Transfer of Polymeric-Fluid-Based Cu Nanofluids

2017 ◽  
Author(s):  
Weihua Cai ◽  
Yongyao Li ◽  
Yue Wang ◽  
Xin Zheng ◽  
Mengsheng Zhu
Keyword(s):  
Heat Transfer ◽  
Aqueous Solution ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Drag Reduction ◽  
Volume Fraction ◽  
Solution Flow ◽  
Flow And Heat Transfer ◽  
Wall Shear ◽  
Polymer Aqueous Solution

In this paper, we propose a new fluid: drag-reducing-fluid-based nanofluids (DRFBN), i.e., nanoparticles are added into polymer aqueous solution. In order to investigate the flow and heat transfer characteristics of this new fluid, the Reynolds stress turbulence model and equivalent viscosity model are used in the simulations. Wall shear stress and Nusselt number (Nu) are chosen to represent the effects of drag reduction and heat enhancement respectively. The numerical studies mainly focus on the effects of different parameters on wall shear stress and Nu. The results show that comparison with water flow, DRFBN flow still has remarkable drag-reducing effect; comparison with polymer aqueous solution flow, DRFBN flow has some improvement on heat transfer. Therefore, DRFBN has duel effects: drag reduction and heat transfer enhancement. Besides, it is found that the parameters of nanoparticle volume fraction, Reynolds number and drag-reducing parameter have remarkable effects on wall shear stress and Nu of DRFBN flow.

scholarly journals Unsteady flow and heat transfer over a permeable stretching/shrinking sheet with generalized slip velocity

2018 ◽  
Vol 28 (6) ◽  
pp. 1457-1470 ◽  
Author(s):  
Mohd Ezad Hafidz Hafidzuddin ◽  
Roslinda Nazar ◽  
Norihan M. Arifin ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Unsteady Flow ◽  
Slip Velocity ◽  
Shrinking Sheet ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Polymer Sheets ◽  
Branch Solution ◽  
Layer Flow

Purpose This study aims to investigate the unsteady two-dimensional viscous flow and heat transfer over an unsteady permeable stretching/shrinking sheet (surface) with generalized slip velocity condition. Design/methodology/approach Similarity transformation is used to reduce the system of partial differential equations into a system of nonlinear ordinary differential equations. The resulting equations are then solved numerically using “bvp4c” function in MATLAB software. Findings Dual solutions are found for a certain range of the unsteady, suction and stretching/shrinking parameters. Stability analysis is performed, and it is revealed that the first (upper branch) solution is stable and physically realizable, whereas the second (lower branch) solution is unstable. Practical implications The results obtained can be used to explain the characteristics and applications of the generalized slip in boundary layer flow. Such condition is applied for particulate fluids such as foams, emulsions, polymer solutions and suspensions. Furthermore, the phenomenon of stretching/shrinking sheet can be found on the manufacturing of polymer sheets, rising and shrinking balloon or moving and shrinking polymer film. Originality/value The present numerical results are original and new for the study of unsteady flow and heat transfer over a permeable stretching/shrinking sheet with generalized slip velocity.

Investigation of micropolar hybrid ferrofluid flow over a vertical plate by considering various base fluid and nanoparticle shape factor

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Kh. Hosseinzadeh ◽  
So Roghani ◽  
A. Asadi ◽  
Amirreza Mogharrebi ◽  
D.D. Ganji
Keyword(s):  
Magnetic Field ◽  
Shape Factor ◽  
Vertical Plate ◽  
Magnetic Parameter ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Nanoparticle Volume Fraction ◽  
Convection Heat ◽  
Content Type

Purpose The purpose of this paper is to investigate micropolar magnetohydrodynamics (MHD) fluid flow passing over a vertical plate. Three different base fluids have been used that include water, ethylene glycol and ethylene glycol/water (50%–50%). Also, a nanoparticle was used in all of the base fluids. The effects of natural convection heat transfer and magnetic field have been taken into account. Design/methodology/approach The main purpose of solving the governing equations is to scrutinize the effects of the magnetic parameter, the nanoparticle volume fraction, micropolar parameter and nanoparticles shape factor on velocity, temperature and microrotation profiles, the skin friction coefficient and the Nusselt number. These surveys have been considered for three base fluids simultaneously. Findings The results indicate that for water-based fluids, the temperature profile of lamina-shaped nanoparticles is 38.09% higher than brick-shaped nanoparticles. Originality/value This paper provides micropolar MHD fluid flow analysis considering natural convection heat transfer and magnetic field in three different base fluids. The aim of assessments is the diagnosis of some parameter effects, such as magnetic parameter and nanoparticle volume fraction, on velocity, temperature and microrotation profiles and components. Also, the use of mixed base fluids presented as a novelty in this paper.

Sign in / Sign up

Export Citation Format

Share Document