scholarly journals Analysis of the drivers and benefits of BIM incorporation into quantity surveying profession

2018 ◽  
Vol 16 (5) ◽  
pp. 750-766 ◽  
Author(s):  
Solomon Olusola Babatunde ◽  
Damilola Ekundayo ◽  
Olubola Babalola ◽  
Jumoke Aduramigba Jimoh
Keyword(s):  
Undergraduate Students ◽  
Practical Implication ◽  
Empirical Studies ◽  
Information Modeling ◽  
Content Type ◽  
Whitney Test ◽  
Mann Whitney Test ◽  
Significant Difference ◽  
Building Information ◽  
Quantity Surveying

Purpose Building information modeling (BIM) inclusion in education pedagogy is crucial in preparing skilled graduates for employment in the construction industry. Against this backdrop, studies on BIM education abound in architecture, engineering and construction (AEC) programmes in higher education institutions (HEIs). However, there are limited empirical studies on BIM potentials in the quantity surveying (QS) profession in HEIs, particularly in developing countries. The purpose of this study is to identify and assess the BIM drivers and benefits as important to the QS profession using an empirical approach. Design/methodology/approach A comprehensive literature review was conducted to identify the BIM drivers and benefits in relation to the QS profession, which was used to design a questionnaire. To capture a broad perception, a questionnaire survey was carried out which targeted the academia and final year undergraduate students from two selected universities offering QS honour degree programmes in Nigeria. Data collected were analysed using mean score, standard deviation and Mann–Whitney test. Findings The study identified 12 BIM drivers in relation to the QS profession and the analysis of the ranking revealed that almost all the identified BIM drivers are considered by respondents as important. The study further identified 14 BIM benefits and the analysis of the ranking indicated that all the identified BIM benefits are considered as important. The results of the Mann–Whitney test indicated a slight statistically significant difference, particularly in one of the selected universities on the ranking of the BIM drivers and benefits as important to the QS profession. Practical implication The findings of the study provide empirical evidence on the current perceptions of the drivers and benefits of BIM to QS academia and students as they explore the concept for the advancement of QS profession. Originality/value This study would provide practical insights to use BIM for QS practice. Also, this study would contribute to improving the QS graduates and professional quantity surveyors understanding of the BIM knowledge applicable to QS profession.

Increasing production efficiency through the reduction of transportation activities and time using 4D BIM simulations

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Cristina Toca Pérez ◽  
Dayana Bastos Costa
Keyword(s):  
Production Efficiency ◽  
Design Science ◽  
Empirical Studies ◽  
Science Research ◽  
Information Modeling ◽  
Assembly Planning ◽  
Actual Performance ◽  
Content Type ◽  
Building Information ◽  
Job Site

PurposeThis paper proposes to apply the lean philosophy principle of minimizing or eliminating non-value adding activities combined with 4D building information modeling (BIM) simulations to reduce transportation waste in construction production processes.Design/methodology/approachThis study adopts design science research (DSR) because of its prescriptive character to produce innovative constructions (artifacts) to solve real-world problems. The artifact proposed is a set of constructs for evaluating the utility of 4D BIM simulations for transportation waste reduction. The authors performed two learning cycles using empirical studies in projects A, B and C. The construction process of cast-in-place (CIP) reinforcement concrete (RC) was selected to demonstrate and evaluate 4D BIM's utility. The empirical studies focused on understanding the current transportation waste, collecting actual performance data during job site visits and demonstrating the usage of 4D BIM.FindingsIn the first cycle, 4D BIM successfully allowed users to understand the CIP-RC process's transportation activities, which were modeled. In the second cycle, 4D BIM enabled better decision-making processes concerning the definitions of strategies for placing reusable formworks for CIP concrete walls by planning transportation activities.Practical implicationsIn Cycle 2, three different scenarios were simulated to identify the most suitable formwork assembly planning, and the results were compared to the real situations identified during the job site visits. The scenario chosen demonstrated that the 4D BIM simulation yielded an 18.75% cycle time reduction. In addition, the simulation contributed to a decrease in transportation waste that was previously identified.Originality/valueThe original contribution of this paper is the use of 4D BIM simulation for managing non-value adding activities to reduce transportation waste. The utility of 4D BIM for the reduction of those conflicts considered three constructs: (1) the capacity to improve transportation activity efficiency, (2) the capacity to improve construction production efficiency and (3) the capacity to reduce transportation waste consequences.

Evaluation of internet of things (IoT) application areas for sustainable construction

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ayodeji Emmanuel Oke ◽  
Victor Adetunji Arowoiya
Keyword(s):  
Internet Of Things ◽  
Construction Industry ◽  
Information Modeling ◽  
Sustainable Construction ◽  
Item Score ◽  
Content Type ◽  
Site Monitoring ◽  
Significant Difference ◽  
Building Information ◽  
Information And Communication

PurposeThis purpose of the study is to evaluate areas of application of internet of things (IoT) in the construction industry, with the view of increasing the level of usage of technology. This will help in understanding the areas where IoT can be applied in the construction industry for better improvement.Design/methodology/approachA quantitative approach was adopted for this study, and the adopted questionnaire was structured on a five-point Likert scale to elicit the opinion of respondents in the areas of application of IoT in the construction industry. The respondents included are quantity surveyors, land surveyors, builders, architects and engineers. Bar chart, mean item score, one sample t-test and Kruskal–Wallis H test were used in analyzing the retrieved data.FindingsThe results showed that building information modeling, construction management, remote usage monitoring, equipment services and repair, construction tools and equipment tracking are areas where IoT is mostly applied in the industry. Site monitoring is the only factor that has significant difference in the opinions of professionals, while others do not have. One sample t-test revealed that three factors out of 12 do not have significance attached by professionals.Originality/valueThe study gives insight into different areas where IoT can be applied in the construction industry. It also highlights how its application can be improved through workshops, training, seminar and conference for construction professionals to keep themselves abreast of information and communication technology trends, especially in the aspect of IoT. The IoT adoption helps in accomplishing sustainable infrastructural projects with more convenience.

Factors impacting BIM application in prefabricated buildings in China with DEMATEL-ISM

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Cheng Gong ◽  
Hongyu Xu ◽  
Feng Xiong ◽  
Jian Zuo ◽  
Na Dong
Keyword(s):  
Rapid Development ◽  
Information Modeling ◽  
Critical Factors ◽  
Interpretive Structural Modeling ◽  
Content Type ◽  
Expert Interview ◽  
Improvement Strategies ◽  
Building Information ◽  
Share Data ◽  
Strategic Goals

Purpose Some papers have investigated the complex factors impacting building information modeling (BIM) application in prefabricated buildings (PBs), but few paid attention to their interaction relationships. Ignoring the fact that different factors are not isolated may lead to some key factors being overlooked without appropriate improvement strategies being proposed. This paper aims to analyze those factors and their inter-relationships, with the view to identify the critical factors and their interaction relationships so as to derive constructive strategies that would effectively facilitate BIM adoption in Chinese prefabrication. Design/methodology/approach First, factors influencing BIM application in prefabrication are extracted and collated by literature review, expert interview and analysis of PBs characteristics. Thereafter, an evaluation laboratory (decision-making trial and evaluation laboratory) and interpretive structural modeling are used to explore the relationships and hierarchy among the factors. Based on the degree of cause and centrality, critical factors are extracted and the interaction relationship are investigated. Findings The results show that BIM policies and standards for PBs are the main causal factors. The maturity of BIM software and BIM data interface for PBs, willingness to share data, the strategic goals of the enterprise, BIM law and BIM input and benefit are the main transitional factors while BIM staff and workflow, enterprise attitude, distribution of BIM liability and cooperation of participants are the main direct factors. Originality/value Based on the above findings, corresponding improvement strategies are proposed so as to promote BIM application in prefabrication and the rapid development of China’s PBs efficiently.

scholarly journals PENGARUH MENYIKAT GIGI DENGAN SIWAK (Salvadora persica) TERHADAP pH SALIVA

2016 ◽  
Vol 4 (1) ◽  
pp. 45-54
Author(s):  
Yossy Juliarni ◽  
Gunawan Gunawan2
Keyword(s):  
T Test ◽  
Control Group ◽  
Case Group ◽  
Salvadora Persica ◽  
Control Group Design ◽  
Whitney Test ◽  
Mann Whitney Test ◽  
Significant Difference ◽  
Salivary Ph ◽  
Paired T Test

Background: Salivary pH is one of factor which involved in caries development. Decreasing of salivary pH will cause enamel demineralization. Miswak (Salvadora persica) as a toothbrush because it has mechanical and chemical effects such as essential oil and bicarbonate which can stimulate salivary secretion. Thus, it will increase the buffer capacity and salivary pH lead to enamel remineralization. Objective: This study aimed to know the effect of toothbrushing with miswak (Salvadora persica) on salivary pH. Methods: The clinical experiment study with pre-test and post-test control group design. The sample of this study is the students of Faculty of Dentistry, Andalas University, Padang. There are 34 students that divided into two groups randomly that is case and control group. Case group used miswak while control group used conventional toothbrush, respectively brushing horizontally for 2 minutes. Salivary pH was measured using digital pH meter in scale of 0.0 to 14.0 with 0.1 sensitivity from pen type pH meter. The data analyzed by Shapiro-Wilk test continued by paired t-test and Mann-Whitney test. Results: paired t-test produced significant value p=0,001 in case group and p=0,000 in control group. Mann-Whitney test produced significant value p=0.317. There was no significant difference in statistic among these groups. Conclusion: Toothbrushing with miswak has effect on salivary pH. Miswak as effective as toothbrush on salivary pH Keywords:Toothbrushing, miswak (Salvadora persica), Salivar

scholarly journals Evaluation of hydrogel use in the development of Rapanea ferruginea with water restriction by vibrational Fourier Transform Infrared Spectroscopy (FTIR-UATR)

2021 ◽  
Vol 16 (5) ◽  
pp. 1-16
Author(s):  
Douglas Cubas Pereira ◽  
Breno Pupin ◽  
Kumiko Koibuchi Sakane
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Fourier Transform Infrared ◽  
Control Group ◽  
Water Restriction ◽  
Whitney Test ◽  
Mann Whitney Test ◽  
Water Band ◽  
Significant Difference

This study evaluated the use of hydrogel on the development of Rapanea ferruginea under water restriction through Vibrational Fourier Transform Infrared Spectroscopy (FTIR-UATR). Seedlings of approximately 30 cm height were transferred in pots with 3 L of soil. The group of seedlings was separated into 5 different triplicate treatments according to the amount of hydrogel, as follows: H1 (25%), H2 (20%), H3 (15%), H4 (10%) and S (control without hydrogel). The applied hydrogel was mixed homogeneously with the soil. All treatments were irrigated with 40 mL of water. FTIR spectra were obtained from fresh leaves collected during 13 months of monitoring. The correlation of the hydroxyl (water) band with the main biomolecules between treatments with the control was evaluated using the Mann-Whitney test (p<0.05). The biomolecule bands were subjected to principal component analysis (PCA) and hierarchical clustering analysis (HCA). The results indicate a significant correlation of the water band with the lipid, hemicellulose, cell wall and starch components in the species. The use of hydrogel resulted in a significant difference in the water absorption band in relation to the control group through the Mann-Whitney test and in biomolecules as the HCA and PCA analysis suggested. The best development was observed in groups H4 (10%), H2 (20%) and H3 (15%). The use of hydrogel positively influences the biomolecular development of the Rapanea ferruginea and monitoring is viable by FTIR. Keywords: FTIR infrared spectroscopy, plant water management, superabsorbent polymer.

scholarly journals EFEKTIVITAS POSISI TANGAN PENOLONG DALAM PENCEGAHAN RUPTUR PERINEUM PADA PERSALINAN NORMAL

2017 ◽  
Vol 9 (01) ◽  
pp. 68
Author(s):  
Mulyati Priyantini ◽  
Yuli Trisnawati
Keyword(s):  
Maternal Morbidity ◽  
P Value ◽  
Cross Sectional ◽  
Second Stage Of Labor ◽  
Whitney Test ◽  
Second Stage ◽  
Mann Whitney Test ◽  
Significant Difference ◽  
U Value ◽  
Quota Sampling

ABSTRAKFokus utama asuhan persalinan adalah pencegahan komplikasi untuk mengurangi angka kesakitan dan kematian ibu. Salah satu upaya adalah mencegah terjadinya ruptur perineum. Posisi tangan yang dipakai penolong persalinan kala II untuk mencegah ruptur perineum antara lain posisi tangan APN dan Varney. Penelitian ini bertujuan untuk mengetahui efektivitas antara posisi tangan penolong menurut APN dan menurut Varney dalam mencegah ruptur perineum spontan pada kala II persalinan di RSIA ‘Bunda arif’ Purwokerto. Penelitian ini merupakan penelitian observasional analitik, menggunakan pendekatan cross sectional dengan populasi seluruh persalinan spontan di RSIA ‘Bunda arif’ Purwokerto. Sampel yang digunakan adalah quota sampling  sebanyak 30 sampel yang memenuhi kriteria inklusi. Metode analisis data menggunakan uji U Mann-Whitney. Hasil penelitian ini adalah Kejadian ruptur perineum pada posisi tangan menurut APN sebanyak 93,3%, sedangkan menurut Varney sebanyak 86,7%. Hasil analisa statistik uji U Mann-Whitney didapatkan p value = 0,550 (p>0,005) sedangkan U value  = 33,000 (Uh < U t ), artinya tidak ada perbedaan bermakna, tetapi posisi tangan Varney lebih baik dengan selisih ruptur 6,6%. Posisi tangan penolong menurut Varney lebih efektif daripada posisi tangan menurut APN dalam pencegahan ruptur perineum spontan pada kala II persalinan, tetapi keduanya tidak memberikan perbedaan yang bermakna terhadap kejadian ruptur perineum. Penolong persalinan dapat menemukan metode yang paling tepat dalam meminimalisir kejadian ruptur perineum spontan untuk menurunkan angka kesakitan dan kematian ibu.Keyword : Posisi tangan penolong, ruptur perineumEFFECTIVENESS OF HANDLING POSITION IN PREVENTION OF PERINEUM RUPTURE IN NORMAL LABORABSTRACTMain focus of delivery care is preventing the complication to reduce the maternal morbidity and mortality. One of the efforts to prevent the occurance of perineal rupture. The position hand which is used birth attendant in the second stage of labor to prevent perineal rupture among others APN and Varney hands position. The goal of this reasearch is to know the effectiveness between APN and Varney hands position to prevent spontanoeus perineal rupture in the second stage of labor in RSIA ‘Bunda arif’ Purwokerto. This reasearch was observational analytic by approachment cross sectional with population of this reasearch was all of spontaneous delivery in RSIA ‘Bunda arif’ Purwokerto and the sample used quota sampling, it’s about 30 sample can be a inclusion criteria. The analyze method data used U Mann-Whitney test. The result of this experiment are precentage of spontaneous perineal rupture by  APN hands position is 93,3%, while by Varney is 86,7%. Result of statistic analysis used U Mann-Whitney test is p value = 0,550 (p>0.005) and U value  = 33,000 (Uh < U t). It means, not significant difference, but Varney hands position better by a margin of 6.6%. the conclusion are varney hands position is more effective than APN hands position in  prevention spontaneous perineal rupture in the second stage of labor, but both not significant for perinel rupture. Suggestion : Birth attendants can find the most appopriate method to minimize perineal ruptured to reduce maternal morbidity and mortalityKeyword : APN & Varney hands position, and perineal rupture.

Analysing BIM implementation in the Egyptian construction industry

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohamed Marzouk ◽  
Heba Elsaay ◽  
Ayman Ahmed Ezzat Othman
Keyword(s):  
Construction Industry ◽  
Design Methodology ◽  
Information Modeling ◽  
Survey Questionnaire ◽  
Review Of Literature ◽  
Strategy Formulation ◽  
Content Type ◽  
Practical Strategy ◽  
Building Information ◽  
International Strategies

PurposeThis research is built up upon exploring the concepts of building information modeling (BIM) adoption and strategy formulation with the aim to develop a strategy for implementing BIM in the Egyptian construction industry.Design/methodology/approachThe development of the BIM implementation strategy was based on two pillars, namely the literature review and results of the survey questionnaire and interviews. First, the review of literature helped investigating the BIM challenges and international strategies developed to implement BIM worldwide.FindingsThe research presented recommendations to assist policymakers in Egypt to facilitate BIM implementation.Originality/valueAlthough multiple frameworks have been proposed to aid in BIM implementation, a practical strategy to implement BIM in Egypt is still lacking. Moreover, current market scale studies neglect nonsoftware aspects of BIM adoption, do not identify market gaps or reflect market-specific criteria. As such, it cannot be used by policymakers to facilitate BIM diffusion.

An empirical survey of the perceived benefits of executing BIM and sustainability practices in the built environment

2019 ◽  
Vol 19 (3) ◽  
pp. 321-342 ◽  
Author(s):  
Timothy Oluwatosin Olawumi ◽  
Daniel W.M. Chan
Keyword(s):  
Built Environment ◽  
Construction Projects ◽  
Green Building ◽  
Information Modeling ◽  
Content Type ◽  
Empirical Survey ◽  
Building Information ◽  
New Construction ◽  
Sustainability Practices ◽  
Diverse Groups

Purpose The increasing urbanization of the built environment has bolstered the need to promote green Building Information Modeling (BIM) initiative in new construction projects and the rehabilitation of old premises. This study aims to explore and examine the key benefits of the implementation of BIM and sustainability practices in the built environment. Design/methodology/approach The study gathered the worldwide perceptions of 220 survey participants from 21 countries which were analyzed using descriptive and inferential analytical methods. The identified individual benefits of green BIM were further categorized into their underlying clusters using factor analysis. Findings The key benefits are related to enhancing project efficiency and productivity, ensuring real-time sustainable design and multi-design alternatives, facilitating the selection of sustainable materials and components, together with reducing material wastage and project’s environmental impact, among others. The study analyzed and compared the perceptions of the diverse groups of the respondents as well. Practical implications Effective blueprints and insightful recommendations for enhancing the various stakeholders’ capacities to implement green BIM in their construction projects were put forward to achieve the aim of sustainable smart urbanization. Originality/value The study identified salient benefits of the adoption of BIM and sustainability practices. The proper integration of these concepts and the execution of the recommended useful strategies by construction stakeholders, policymakers and local authorities will enable the built environment to reap the gains of its implementation.

scholarly journals A three-step process for reporting progress in detail engineering using BIM, based on experiences from oil and gas projects

2019 ◽  
Vol 26 (4) ◽  
pp. 648-667 ◽  
Author(s):  
Øystein Mejlænder-Larsen
Keyword(s):  
Construction Projects ◽  
Oil And Gas ◽  
Case Study Research ◽  
Oil And Gas Industry ◽  
Information Modeling ◽  
Content Type ◽  
Step Process ◽  
Information Models ◽  
Building Information ◽  
Building Information Models

Purpose Traditionally, progress in detail engineering in construction projects is reported based on estimates and manual input from the disciplines in the engineering team. Reporting progress on activities in an engineering schedule manually, based on subjective evaluations, is time consuming and can reduce accuracy, especially in larger and multi-disciplinary projects. How can progress in detail engineering be reported using BIM and connected to activities in an engineering schedule? The purpose of this paper is to introduce a three-step process for reporting progress in detail engineering using building information modeling (BIM) to minimize manual reporting and increase quality and accuracy. Design/methodology/approach The findings of this paper are based on the studies of experiences from the execution of projects in the oil and gas industry. Data are collected from an engineering, procurement and construction (EPC) contractor and two engineering contractors using case study research. Findings In the first step, control objects in building information models are introduced. Statuses are added to control objects to fulfill defined quality levels related to milestones. In the second step, the control objects with statuses are used to report visual progress and aggregated in an overall progress report. In the third step, overall progress from building information models are connected to activities in an engineering schedule. Originality/value Existing research works related to monitoring and reporting progress using a BIM focus on construction and not on detail engineering. The research demonstrates that actual progress in detail engineering can be visualized and reported through the use of BIM and extracted to activities in an engineering schedule through a three-step process.

Sign in / Sign up

Export Citation Format

Share Document