Implementation of Laser Micromachining as a Promising Technique for Designing the Miniature ISM-band Flexible Coplanar Waveguide-fed Antennas

2021 ◽  
Author(s):  
Ivan A. Chistyakov ◽  
Ivan S. Ozhogin ◽  
Ilya O. Kozhevnikov ◽  
Anton M. Pavlov ◽  
Alexey A. Serdobintsev ◽  
...  
Keyword(s):  
Coplanar Waveguide ◽  
Laser Micromachining ◽  
Promising Technique ◽  
Ism Band

Coplanar waveguide-fed ISM band implantable crossed-type triangular slot antenna for biomedical applications

2013 ◽  
Vol 6 (2) ◽  
pp. 167-172 ◽  
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Biomedical Applications ◽  
Biomedical Application ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
High Gain ◽  
Slot Antenna ◽  
Center Frequency ◽  
Ism Band ◽  
High Data ◽  
Implantable Antenna

A novel coplanar waveguide fed Industrial, Scientific, and Medical (ISM) band implantable crossed-type triangular slot antenna is proposed for biomedical applications. The antenna operates at the center frequency of 2450 MHz, which is in ISM band, to support GHz wideband communication for high-data rate implantable biomedical application. The size of the antenna is 78 mm3 (10 mm × 12 mm × 0.65 mm). The simulated and measured bandwidths are 7.9 and 8.2% at the resonant frequency of 2.45 GHz. The specific absorption rate distribution induced by the implantable antenna inside a human body tissue model is evaluated. The communication between the implanted antenna and external device is also examined. The proposed antenna has substantial merits such as miniaturization, lower return loss, better impedance matching, and high gain over other implanted antennas.

scholarly journals Coplanar Waveguide fed MIMO RDR Antenna for ISM Band Frequencies

2019 ◽  
Vol 590 ◽  
pp. 012061
Author(s):  
D. Dileepan ◽  
R. Sanmugasundaram ◽  
S. Natarajan
Keyword(s):  
Coplanar Waveguide ◽  
Ism Band

scholarly journals CPW based Band Pass Filter Using DGS for ISM Band Applications

2018 ◽  
Vol 7 (3.34) ◽  
pp. 421
Author(s):  
Mrs. S. Jalaja ◽  
Dr V. Prithivirajan ◽  
K Gajalakshimi ◽  
S Chitra ◽  
R Nithya
Keyword(s):  
Bandpass Filter ◽  
Coplanar Waveguide ◽  
Center Frequency ◽  
Band Pass Filter ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Pass Filter ◽  
Ism Band ◽  
Band Pass ◽  
Filtering Effect

The design and simulation of coplanar waveguide (CPW) bandpass filter (BPF) has been described in this paper. It mainly focuses on Defected Ground Structure (DGS), where U-shaped DGS with open stub in transmission line has been introduced. By etching the DGS pattern in ground and transmission will change the distribution of inductance and capacitance to produce filtering effect. This paper also discusses about the influence of geometrical parameter l for the improvement in the frequency response of bandpass filter. As increasing the dimension of the geometric parameter l shift the center frequency to the higher frequencies. This filter offers a bandwidth of 1.65 GHz with passband ranging from 2.1 GHz to 3.75 GHz with a stopband rejection is about -28 dB.  

Design of CPW-fed tapered MIMO antenna for ISM band applications

2015 ◽  
Vol 9 (1) ◽  
pp. 227-230 ◽  
Author(s):  
Srimathi Mathialagan
Keyword(s):  
Patient Safety ◽  
Power Consumption ◽  
Radio Frequency ◽  
Medical Devices ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Human Tissues ◽  
Implantable Medical Devices ◽  
Mimo Antenna ◽  
Ism Band

In this paper, an implantable coplanar waveguide-fed tapered monopole antenna for industrial scientific and medical band (2.4–2.48 GHz) applications is proposed. This proposed design has an overall dimension of 44 × 44 × 0.5 mm3. The designed antenna is made compatible for implantation on human tissues such as skin, fat, or muscles by embedding it on the RT Duroid substrate and the 10 dB return loss bandwidth is 6.12% ranging from 2.35 to 2.5 GHz. This proposed antenna can be significantly used in implantable medical devices and radio frequency (RF), because of its merits such as conformability, flexibility in design and shape, biocompatibility, patient safety, miniaturization, power consumption, etc.

Implantable CPW Fed Circular Slot Antennas at 2.45 GHz ISM Band for Biomedical Applications

2014 ◽  
Vol 24 (01) ◽  
pp. 1550014 ◽  
Author(s):  
S. Ashok Kumar ◽  
T. Shanmuganantham
Keyword(s):  
Electrical Properties ◽  
Muscle Tissue ◽  
Biomedical Applications ◽  
Coplanar Waveguide ◽  
Human Muscle ◽  
Slot Antennas ◽  
Dielectric Parameters ◽  
Al2o3 Ceramic ◽  
Ism Band ◽  
Antenna Performance

A novel coplanar waveguide (CPW) fed circular slot antennas are proposed for industrial, scientific and medical (ISM) band (2.4–2.48 GHz) applications. To make the designed antenna suitable for implantation, it is embedded in biocompatible Al2O3 ceramic substrate. The antenna was simulated by immersing it in a phantom liquid, imitating the electrical properties of the human muscle tissue. A study of the sensitivity of the antenna performance as a function of the dielectric parameters of the environment in which it is immersed was performed. Simulations in various dimensions state demonstrate that the antenna covers the complete ISM band. The demonstration among the design EM characteristics of the antenna is presented by current distributions.

Implantable CPW-fed Z-monopole antennas at 2.45 GHz ISM band for biomedical applications

2014 ◽  
Vol 7 (5) ◽  
pp. 529-533 ◽  
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Coplanar Waveguide ◽  
Wide Band ◽  
Dielectric Parameters ◽  
Ism Band ◽  
High Data ◽  
Antenna Performance ◽  
Monopole Antennas ◽  
Neural Monitoring ◽  
First Time ◽  
Monitoring Application

A novel coplanar waveguide-fed Z-monopole antennas are proposed for the first time for a industrial, scientific, and medical (ISM) band (2.4–2.48 GHz) applications. To make the designed antenna suitable for implantation, it is embedded in biocompatible Al2O3ceramic substrate. The antenna operates at resonance frequency of 2.45 GHz to support wide band communication for high data rate implantable neural monitoring application. The size of the antenna is 38.675 mm3(8.5 mm × 7 mm × 0.65 mm). The antenna was simulated and measured by immersing it in a phantom liquid, imitate the electrical properties of the human body phantom liquid. The simulated and measured bandwidths are 10.2 and 11.4% at the centre frequency. A study of the sensitivity of the antenna performance as a function of its dielectric parameters of the environment in which it is immersed was performed. The demonstration among the design EM characteristics of the antenna is presented by current distributions.

Implantable CPW-fed rectangular patch antenna for ISM band biomedical applications

2013 ◽  
Vol 6 (1) ◽  
pp. 101-107
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Patch Antenna ◽  
Medical Diagnosis ◽  
Biomedical Applications ◽  
Return Loss ◽  
Simple Structure ◽  
Coplanar Waveguide ◽  
Human Muscle ◽  
Ism Band ◽  
Rectangular Patch ◽  
Implantable Antennas

Implantable antennas have recently been receiving substantial attention for medical diagnosis and treatment. In this paper, a coplanar waveguide-fed monopole antenna for industrial, scientific, and medical (ISM) band biomedical applications is proposed. The antenna has a simple structure is placed on human tissues such as muscle, fat, and skin. The designed antenna is made compatible for implantation by embedding it in an FR4 substrate. The proposed antenna is simulated using the method of moment's software IE3D by assuming the predetermined dielectric constant for the human muscle tissue, fat, and skin. The antenna operates in the frequency of ISM bands, 2.4–2.48 GHz. Simulated and measured gains attain −7.7 and −8 dBi in the frequency of 2.45 GHz. The radiation pattern, return loss, current distribution, and gain of these antennas were examined and characterized.

EXELFS Studies of Carbon Fibers

1990 ◽  
Vol 48 (2) ◽  
pp. 72-73
Author(s):  
V. Serin ◽  
K. Hssein ◽  
G. Zanchi ◽  
J. Sévely
Keyword(s):  
Carbon Fibers ◽  
Energy Analysis ◽  
Electron Excitation ◽  
Complex Structures ◽  
High Modulus ◽  
Promising Technique ◽  
X Ray ◽  
Fine Structures ◽  
X Ray Absorption

The present developments of electron energy analysis in the microscopes by E.E.L.S. allow an accurate recording of the spectra and of their different complex structures associated with the inner shell electron excitation by the incident electrons (1). Among these structures, the Extended Energy Loss Fine Structures (EXELFS) are of particular interest. They are equivalent to the well known EXAFS oscillations in X-ray absorption spectroscopy. Due to the EELS characteristic, the Fourier analysis of EXELFS oscillations appears as a promising technique for the characterization of composite materials, the major constituents of which are low Z elements. Using EXELFS, we have developed a microstructural study of carbon fibers. This analysis concerns the carbon K edge, which appears in the spectra at 285 eV. The purpose of the paper is to compare the local short range order, determined by this way in the case of Courtauld HTS and P100 ex-polyacrylonitrile carbon fibers, which are high tensile strength (HTS) and high modulus (HM) fibers respectively.

Sign in / Sign up

Export Citation Format

Share Document