A CMOS current-mode band-pass filter with small chip area

2003 ◽  
Author(s):  
Y. Maruyama ◽  
A. Hyogo ◽  
K. Sekine
Keyword(s):  
Current Mode ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Chip Area ◽  
Band Pass

A NOVEL CCII-BASED TUNABLE INDUCTANCE AND HIGH FREQUENCY CURRENT-MODE BAND PASS FILTER APPLICATION

2006 ◽  
Vol 15 (06) ◽  
pp. 849-860 ◽  
Author(s):  
SAMIR BEN SALEM ◽  
DORRA SELLAMI MASMOUDI ◽  
MOURAD LOULOU
Keyword(s):  
High Frequency ◽  
Current Mode ◽  
Negative Resistance ◽  
Basic Block ◽  
Band Pass Filter ◽  
Compensation Strategy ◽  
Pass Filter ◽  
Passive Resistance ◽  
Band Pass ◽  
High Level

In this paper, we introduce an implementation of a CCII-based grounded inductance operating in class AB. In order to get tunable characteristics of the design, a translinear CCII configuration is used as a basic block for its high level of controllability. A frequency characterization of the translinear CCII is done. In order to optimize its static and dynamic characteristics, an algorithmic driven methodology is developed ending to the optimal transistor geometries. The optimized CCII has a current bandwidth of 1.28 GHz and a voltage bandwidth of 5.48 GHz. It is applied in the simulated inductance design. We first consider the conventional topology of the grounded inductance based on the generalized impedance converter principle. Making use of the controllable series parasitic resistance at port X in translinear CCII, we design tunable characteristics of the inductance. The effect of current conveyor's nonidealities has been taken into account. A compensation strategy has been presented. It is based on the insertion of a high active CCII-based negative resistance and a very low passive resistance. The compensation strategy does not affect the inductance tuning process. Simulation results show that the proposed inductance can be tuned in the range [0.025 μH; 15.4 μH]. The simulated inductance has been applied in a fully integrated tunable high frequency band pass filter to illustrate the versatility of the circuit. The filter is electrically tunable by controlling the conveyor's bias current.

scholarly journals Implementation of RC Oscillator with High-Q Frequency Selection using CCCII.

2019 ◽  
Vol 8 (12) ◽  
pp. 4470-4477
Keyword(s):  
Second Generation ◽  
Current Mode ◽  
Cmos Technology ◽  
Current Conveyor ◽  
Band Pass Filter ◽  
Phase Oscillators ◽  
Pass Filter ◽  
High Q ◽  
Voltage Mode ◽  
Band Pass

This article given a second generation current controlled current conveyor positive (CCCII+), second generation current controlled current conveyor negative (CCCII-), Quadrature oscillator with high-Q frequency choosing network and implementing completely different phase oscillators by employing (CCCII+) positive and (CCCII-) negative, and high band pass filter network, the approach is predicted on the CMOS technology . The root of this concept is, considering a customary voltage mode oscillator which consists of band pass filter with prime quality issue (high-Q) and voltage mode amplifier is transfigure into current mode oscillator by replacing tans-conductance amplifier. Because the loop of the oscillator is has lavish selectivity, the oscillator process less distortion. In addition 3dB bandwidth, oscillating condition, oscillation frequency of the oscillator could linearly, independently and electronically be tuned by adjusting the bias current of the (CCCII±)[1], lastly different simulations have been carried out to verify the linearity between output and input ports, range of frequency operations. These results can justify that the designed circuits are workable.

scholarly journals Single CDTA-Based Current Mode All-Pass Filter and Its Applications

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Neeta Pandey ◽  
Sajal K. Paul
Keyword(s):  
Input Impedance ◽  
Current Mode ◽  
Cmos Technology ◽  
Band Pass Filter ◽  
Output Impedance ◽  
Spice Simulation ◽  
Pass Filter ◽  
Transconductance Amplifier ◽  
Band Pass ◽  
Current Difference

This paper presents a single current difference transconductance amplifier (CDTA) based all-pass current mode filter. The proposed configuration makes use of a grounded capacitor which makes it suitable for IC implementation. Its input impedance is low and output impedance is high, hence suitable for cascading. The circuit does not use any matching constraint. The nonideality analysis of the circuit is also given. Two applications, namely, a quadrature oscillator and a highQband pass filter are developed with the proposed circuit. The functionality of the circuit is verified with SPICE simulation using 0.35 μm TSMC CMOS technology parameters.

A NEW TUNABLE FLOATING CMOS FDNR AND ELLIPTIC FILTER APPLICATIONS

2010 ◽  
Vol 19 (08) ◽  
pp. 1641-1650 ◽  
Author(s):  
FIRAT KAÇAR
Keyword(s):  
Integrated Circuit ◽  
Current Mode ◽  
Band Pass Filter ◽  
Mos Transistors ◽  
Pass Filter ◽  
Elliptic Filter ◽  
Low Pass ◽  
Band Pass ◽  
Fifth Order ◽  
A Current

A new tunable CMOS FDNR circuit is proposed. The circuit is based on the transcapacitive gyrator approach with both transcapacitive stages realized by MOS transistors configuration. This FDNR element lends itself well to the design of low-pass ladder filters and its use will result in a more efficient integrated circuit implementation than filters that simulate floating inductors utilizing resistive gyrators. The applications of FDNR to realize a current-mode fifth-order elliptic filter and current mode sixth-order elliptic band-pass filter are given. The proposed FDNR is simulated using CMOS TSMC 0.35 μm technology. Simulation results are given to confirm the theoretical analysis.

scholarly journals Current Controlled Current Differencing Buffered Amplifier: Implementation and Applications

2004 ◽  
Vol 27 (4) ◽  
pp. 219-227 ◽  
Author(s):  
Sudhanshu Maheshwari ◽  
Iqbal A. Khan
Keyword(s):  
Active Element ◽  
Current Mode ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Current Range ◽  
Current Input ◽  
Band Pass ◽  
Simulation Results ◽  
Definition Of ◽  
Harmonic Distortions

A new four terminal current-controlled active element is introduced, where parasitic resistances at two current input ports are controlled leading to the definition of current-controlled current differencing buffered amplifier. Bipolar implementation and as application current-mode band-pass filter circuits are proposed. Simulation results using real device parameters are included, which show device bandwidth of 35 MHz, low total harmonic distortions, and tuning over a wide current range.

Sign in / Sign up

Export Citation Format

Share Document