Impact of a square grounded dielectric substrate on the radiation characteristics of a rectangular microstrip patch antenna

2009 ◽  
Author(s):  
Tae-Young Kim ◽  
Jae-Woo Park ◽  
Boo-Gyoun Kim
Keyword(s):  
Patch Antenna ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Radiation Characteristics ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

scholarly journals Enhancement in RMPA Parameters by Rhombus Connected With Circle Meta Material Structure Using at 1.9 GHz

2016 ◽  
Vol 4 (1) ◽  
pp. 43-45
Author(s):  
Vijay Dandotiya ◽  
Chetan Pathak
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Material Structure ◽  
Radiation Characteristics ◽  
Microstrip Patch ◽  
Left Handed ◽  
Rectangular Microstrip Patch Antenna

Author proposed a new design of meta-material to provide advancement into the factors of the rectangular microstrip patch antenna (RMPA) “Enhancement in RMPA parameters Rhombus Connected With Circle Meta material structure high using at 1.9GHz” As a rectangular microstrip patch antenna is designed at a height of 1.6mm & Left handed Meta material structure is designed at a height of 3.2mm from the ground plane by using CST-MWS software. The resonance frequency 1.9GHz of the designed antenna is using as a high frequency. This paper mainly worked on return loss. The Return loss of the proposed antenna reduced to -31,16dB & bandwidth is increased up to 41.9MHz. This antenna is small size, cheap, compact and easy to fabricate, and achieve good radiation characteristics with higher return loss. In this paper return loss basically defined as system becomes stable with reduced return loss.

scholarly journals Optimization of Micro strip Patch Antenna with Zig-Zag Slot in Broadband Communication

2019 ◽  
Vol 8 (9) ◽  
pp. 823-826
Keyword(s):  
Patch Antenna ◽  
Communication Systems ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Simulation Tools ◽  
Microstrip Patch ◽  
Large Bandwidth ◽  
Comparison Results ◽  
Slotted Antenna ◽  
Rectangular Microstrip Patch Antenna

In this paper designed and analysis of the rectangular Microstrip patch antenna for GSM band with frequency band 5.1 GHz. Primarily the designed a conventional unslotted rectangular microstrip patch antenna and measure its different parameters using simulation tools .again introduced a Zig –Zag slotted antenna with dielectric substrate 2.2 and used the centre resonance frequency of 5.1 GHz. The substrate height of the FR4 was 0.787 mm.The comparison results of slotted and unslotted antenna are achieved large bandwidth and gain.The bandwidth of 35.2 % and achieved gain is 7.18 dBi in this poposed designed antenna. To model the probe feed for the microstrip patch we used a lumped port with port impedance equal to 50 ohm. The Zig-Zag antenna developed and its performance are utilized by Zealand IE3D tools. This antenna is used in GSM application and many other communication systems.

scholarly journals Design of Flexible 3.2 GHz Rectangular Microstrip Patch Antenna for S-Band Communication

2021 ◽  
Vol 21 (2) ◽  
pp. 140
Author(s):  
Teguh Praludi ◽  
Yana Taryana ◽  
Ken Paramayudha ◽  
Budi Prawara ◽  
Yusnita Rahayu ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Flexible Substrate ◽  
Relative Dielectric Constant ◽  
Dielectric Substrate ◽  
Conformal Structure ◽  
Microstrip Patch Antenna ◽  
Center Frequency ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

This paper presents the design, simulation, realization and analysis of flexible microstrip patch antenna for S-band applications. The proposed design also adopts the conformal structure by utilizing flexible substrate. Conformal or flexible structure allows the antenna to fit with any specified shape as desired. The antenna patch dimensions is 43 mm × 25 mm without SMA connector. The patch is etched on the flexible dielectric substrate, pyralux FR 9111, with a relative dielectric constant of εr = 3 and the thickness of substrate, h = 0.025 mm. The antenna is designed to resonate at 3.2 GHz. The return loss (RL) of the simulation is -35.80 dB at the center frequency of 3.2 GHz. The fabricated antenna prototype was measured at different bending angles scenarios including 0º, 30º, 60º, and 90º. The measurement of antenna prototype shows that the center frequency is shifted to the higher frequency of 3.29 GHz, compared to the simulation result. Among these scenarios, measurement at bending angle of 90º gives the best performance with RL = - 31.38 dB at 3.29 GHz, the bandwidth is 80 MHz, and the impedance ZA = 48.36 + j2.04 Ω. Despite a slight differences from simulation results, the designed antenna still performs well as expected.

scholarly journals Design and Simulation of Rectangular Microstrip Patch Antenna with Triple Slot for X Band

2021 ◽  
Vol 9 (12) ◽  
pp. 91-98
Author(s):  
Neha Afreen
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Feed Line ◽  
Microstrip Patch ◽  
X Band ◽  
Rectangular Microstrip Patch Antenna ◽  
Microstrip Feed Line ◽  
Microstrip Feed

Abstract: In the present work an attempt has been made to design and simulation of rectangular microstrip patch antenna with triple slot for X band using microstrip feed line techniques. HFSS High frequency simulator is used to analyse the proposed antenna and simulated the result on the return loss, radiation pattern and gain of the proposed antenna. The antenna is able to achieve in the range of 8-12 GHz for return loss of less than -10 dB. The operating frequency of the proposed antenna is 8.4 GHz & 11 GHz with dielectric substrate, ARLON of = 2.5 and h= 1.6mm. Keywords: ARLON substrate material, FEM, Microstrip Feed Line, X band

scholarly journals Difficulties in patch antenna production & prototyping in Turkey

2021 ◽  
Vol 3 (1) ◽  
pp. 1-10
Author(s):  
Gökberk Kemal Oğuz
Keyword(s):  
Developing Countries ◽  
Exchange Rate ◽  
Patch Antenna ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Patch Antennas ◽  
Radiation Characteristics ◽  
Exchange Rate Fluctuation ◽  
Microstrip Patch ◽  
Rate Fluctuation

In recent years monetary narrowing impact more on Turkey and developing countries. Therefore, the importance of industrial policy and technology management in developing countries has widely increased. Production and design strategies have to be planned carefully. Thus, evidently monetary narrowing and undesired exchange rate fluctuation affected investment and the cash flow in numerous sectors such as finances, funding, industry, service industry, agribusiness, livestock, building trade, research, and development, etc. In this context, this situation broadly hit the research, prototyping, manufacturing and testing phase of the microstrip patch antennas. Today, patch antennas have widely utilized in telecommunication systems. Hence, this growth has increased interest in studies. As it is in every project, cost and efficiency are an essential part of the project design. Therefore, the ratio of cost is more important for Turkey and developing countries due to undesired exchange rate fluctuation, tax, financial obligations, and unexpected world events (e.g. COVID-19 pandemic). Commonly, the microstrip patch antenna comprises particular parts such as a radiating patch on top of the double-sided laminate and ground plane and feeding point located below the double-sided laminate. Therefore, microstrip patch antenna components play a significant role in patch antenna radiation characteristics. Moreover, specifications of the double-sided laminate, such as relative permittivity (or dielectric constant) and real physical thickness, are essential elements on the patch antennas radiation characteristics. Generally, high-quality dielectric substrates are developed and manufactured by western originated companies. Thus, the dielectric substrate with high-grade characteristics is hard to find for Turkey and developing countries. Importing is the only option and quite costly. Choosing a domestic dielectric substrate is inevitable, however insufficient for many cases. In this study, difficulties in microstrip patch antenna production and prototyping in Turkey are analyzed.

Sign in / Sign up

Export Citation Format

Share Document