Ballistics identification using line-scan imaging techniques

2002 ◽  
Author(s):  
A. Zographos ◽  
M. Robinson ◽  
J.P.O. Evans ◽  
C.L. Smith
Keyword(s):  
Imaging Techniques ◽  
Line Scan

Inspection of Fecal Contamination on Strawberries Using Line-Scan LED-Induced Fluorescence Imaging Techniques

2012 ◽  
Author(s):  
Yung-Kun Chuang ◽  
Chun-Chieh Yang ◽  
Moon S Kim ◽  
Stephen R Delwiche ◽  
Y. Martin Lo ◽  
...  
Keyword(s):  
Fluorescence Imaging ◽  
Imaging Techniques ◽  
Fecal Contamination ◽  
Line Scan

ONLINE MULTITASKING LINE-SCAN IMAGING TECHNIQUES FOR SIMULTANEOUS SAFETY AND QUALITY EVALUATION OF APPLES

2008 ◽  
Vol 22 (11) ◽  
pp. 947-952 ◽  
Author(s):  
MOON SUNG KIM ◽  
KANGJIN LEE ◽  
KAUNGLIN CHAO ◽  
ALAN LEFCOURT ◽  
BYUNG-KWAN CHO ◽  
...  
Keyword(s):  
Food Processing ◽  
Dynamic Capabilities ◽  
Quality Evaluation ◽  
Imaging System ◽  
Imaging Techniques ◽  
Inspection System ◽  
Quality Inspection ◽  
Imaging Device ◽  
Line Scan ◽  
Safety Attributes

We developed a push-broom, line-scan imaging system capable of simultaneous measurements of reflectance and fluorescence. The system allows multitasking inspections for quality and safety attributes of apples due to its dynamic capabilities in simultaneously capturing fluorescence and reflectance, and selectivity in multispectral bands. A multitasking image-based inspection system for online applications has been suggested in that a single imaging device that could perform a multitude of both safety and quality inspection needs. The presented multitask inspection approach in online applications may provide an economically viable means for a number of food processing industries being able to adapt to operate and meet the dynamic and specific inspection and sorting needs.

scholarly journals Line-Scan Hyperspectral Imaging Techniques for Food Safety and Quality Applications

2017 ◽  
Vol 7 (2) ◽  
pp. 125 ◽  
Author(s):  
Jianwei Qin ◽  
Moon Kim ◽  
Kuanglin Chao ◽  
Diane Chan ◽  
Stephen Delwiche ◽  
...  
Keyword(s):  
Food Safety ◽  
Hyperspectral Imaging ◽  
Imaging Techniques ◽  
Line Scan ◽  
Food Safety And Quality

Arsenic segregation in polysilicon

1983 ◽  
Vol 41 ◽  
pp. 154-155 ◽  
Author(s):  
P.E. Batson ◽  
C.R.M. Grovenor ◽  
D.A. Smith ◽  
C. Wong
Keyword(s):  
Incident Beam ◽  
Silicon Wafers ◽  
Chemical Polishing ◽  
Bright Field Image ◽  
Beam Size ◽  
Stem Analysis ◽  
Bright Field ◽  
Twin Boundaries ◽  
X Ray ◽  
Line Scan

In this work As doped polysilicon was deposited onto (100) silicon wafers by APCVD at 660°C from a silane-arsine mixture, followed by a ten minute anneal at 1000°C, and in one case a further ten minute anneal at 700°C. Specimens for TEM and STEM analysis were prepared by chemical polishing. The microstructure, which is unchanged by the final 700°C anneal,is shown in Figure 1. It consists of numerous randomly oriented grains many of which contain twins.X-ray analysis was carried out in a VG HB5 STEM. As K α x-ray counts were collected from STEM scans across grain and twin boundaries, Figures 2-4. The incident beam size was about 1.5nm in diameter, and each of the 20 channels in the plots was sampled from a 1.6nm length of the approximately 30nm line scan across the boundary. The bright field image profile along the scanned line was monitored during the analysis to allow correlation between the image and the x-ray signal.

Mitochondrial Reconstructions Based on Serial Thick Sections and HVEM

1975 ◽  
Vol 33 ◽  
pp. 286-287
Author(s):  
Jerome J. Paulin
Keyword(s):  
Imaging Techniques ◽  
Three Dimensional ◽  
Posterior Pole ◽  
Dimensional Structure ◽  
Stereo Imaging ◽  
Thin Sections ◽  
Anatomical Features ◽  
The Past ◽  
Cellular Components ◽  
Mitochondrial Reticulum

Within the past decade it has become apparent that HVEM offers the biologist a means to explore the three-dimensional structure of cells and/or organelles. Stereo-imaging of thick sections (e.g. 0.25-10 μm) not only reveals anatomical features of cellular components, but also reduces errors of interpretation associated with overlap of structures seen in thick sections. Concomitant with stereo-imaging techniques conventional serial Sectioning methods developed with thin sections have been adopted to serial thick sections (≥ 0.25 μm). Three-dimensional reconstructions of the chondriome of several species of trypanosomatid flagellates have been made from tracings of mitochondrial profiles on cellulose acetate sheets. The sheets are flooded with acetone, gluing them together, and the model sawed from the composite and redrawn.The extensive mitochondrial reticulum can be seen in consecutive thick sections of (0.25 μm thick) Crithidia fasciculata (Figs. 1-2). Profiles of the mitochondrion are distinguishable from the anterior apex of the cell (small arrow, Fig. 1) to the posterior pole (small arrow, Fig. 2).

Application of Lattice Imaging Techniques to Amorphous Films

1975 ◽  
Vol 33 ◽  
pp. 8-9
Author(s):  
S. R. Herd ◽  
P. Chaudhari
Keyword(s):  
Nearest Neighbor ◽  
Random Network ◽  
Imaging Techniques ◽  
Network Models ◽  
Accurate Method ◽  
Direct Transmission ◽  
Lattice Imaging ◽  
Transmission Electron ◽  
Lattice Planes ◽  
Nearest Neighbor Distances

Electron diffraction and direct transmission have been used extensively to study the local atomic arrangement in amorphous solids and in particular Ge. Nearest neighbor distances had been calculated from E.D. profiles and the results have been interpreted in terms of the microcrystalline or the random network models. Direct transmission electron microscopy appears the most direct and accurate method to resolve this issue since the spacial resolution of the better instruments are of the order of 3Å. In particular the tilted beam interference method is used regularly to show fringes corresponding to 1.5 to 3Å lattice planes in crystals as resolution tests.

Studies of metaphase chromosomes in the scanning transmission x-ray microscope: Image fidelity, radiation damage and specimen preparation

1992 ◽  
Vol 50 (2) ◽  
pp. 1038-1039
Author(s):  
Shawn Williams ◽  
Xiaodong Zhang ◽  
Susan Lamm ◽  
Jack Van’t Hof
Keyword(s):  
Visible Light ◽  
Radiation Damage ◽  
Cross Section ◽  
Imaging Techniques ◽  
Dose Range ◽  
Specimen Preparation ◽  
X Rays ◽  
Metaphase Chromosomes ◽  
X Ray ◽  
Scanning Transmission

The Scanning Transmission X-ray Microscope (STXM) is well suited for investigating metaphase chromosome structure. The absorption cross-section of soft x-rays having energies between the carbon and oxygen K edges (284 - 531 eV) is 6 - 9.5 times greater for organic specimens than for water, which permits one to examine unstained, wet biological specimens with resolution superior to that attainable using visible light. The attenuation length of the x-rays is suitable for imaging micron thick specimens without sectioning. This large difference in cross-section yields good specimen contrast, so that fewer soft x-rays than electrons are required to image wet biological specimens at a given resolution. But most imaging techniques delivering better resolution than visible light produce radiation damage. Soft x-rays are known to be very effective in damaging biological specimens. The STXM is constructed to minimize specimen dose, but it is important to measure the actual damage induced as a function of dose in order to determine the dose range within which radiation damage does not compromise image quality.

An x-ray microprobe based upon a close-coupled focal-spot / glass capillary arrangement

1992 ◽  
Vol 50 (2) ◽  
pp. 1758-1759
Author(s):  
D. A. Carpenter ◽  
M. A. Taylor
Keyword(s):  
Imaging Techniques ◽  
Fluorescence Analysis ◽  
High Sensitivity ◽  
Specimen Preparation ◽  
X Rays ◽  
Glass Capillary ◽  
Close Coupling ◽  
X Ray ◽  
Point To Point ◽  
Beam Damage

The development of intense sources of x rays has led to renewed interest in the use of microbeams of x rays in x-ray fluorescence analysis. Sparks pointed out that the use of x rays as a probe offered the advantages of high sensitivity, low detection limits, low beam damage, and large penetration depths with minimal specimen preparation or perturbation. In addition, the option of air operation provided special advantages for examination of hydrated systems or for nondestructive microanalysis of large specimens.The disadvantages of synchrotron sources prompted the development of laboratory-based instrumentation with various schemes to maximize the beam flux while maintaining small point-to-point resolution. Nichols and Ryon developed a microprobe using a rotating anode source and a modified microdiffractometer. Cross and Wherry showed that by close-coupling the x-ray source, specimen, and detector, good intensities could be obtained for beam sizes between 30 and 100μm. More importantly, both groups combined specimen scanning with modern imaging techniques for rapid element mapping.

Sign in / Sign up

Export Citation Format

Share Document