Making the Best of JPEG at Very High Compression Ratios: Rectangular Pixel Averaging for Mars PathFi

2005 ◽  
Author(s):  
E.E. Majani ◽  
W.C. Dias
Keyword(s):  
High Compression ◽  
Very High

Synthesis of Non-Uniform Stroke Piston Engines

1996 ◽  
Author(s):  
M. Chew ◽  
T. A. Good
Keyword(s):  
High Compression ◽  
Very High ◽  
Engine Cycle

Abstract Piston engines have generally been designed with strokes that are uniform throughout the engine cycle. Variable-stroke engines have been designed with the capability to change the stroke lengths from cycle to cycle depending on load requirement. This article examines the synthesis of piston engines that are designed to have different stroke lengths and different relative stroke timing over an engine cycle. Such piston trajectories have been found to exhibit very high thermal efficiencies without resorting to high compression ratios. An investigation into different mechanisms and approaches toward the synthesis of such engine mechanisms is presented.

Very High Resolution Analysis of the Dynamics of a Coronal Plasmoid

1994 ◽  
Vol 144 ◽  
pp. 593-596
Author(s):  
O. Bouchard ◽  
S. Koutchmy ◽  
L. November ◽  
J.-C. Vial ◽  
J. B. Zirker
Keyword(s):  
High Resolution ◽  
Solar Eclipse ◽  
Total Solar Eclipse ◽  
Field Of View ◽  
Small Field ◽  
High Resolution Analysis ◽  
Ccd Observations ◽  
Resolution Analysis ◽  
Very High ◽  
Small Field Of View

AbstractWe present the results of the analysis of a movie taken over a small field of view in the intermediate corona at a spatial resolution of 0.5“, a temporal resolution of 1 s and a spectral passband of 7 nm. These CCD observations were made at the prime focus of the 3.6 m aperture CFHT telescope during the 1991 total solar eclipse.

Monte Carlo Algorithms for Moments of Transition Arrays

1988 ◽  
Vol 102 ◽  
pp. 79-81
Author(s):  
A. Goldberg ◽  
S.D. Bloom
Keyword(s):  
Monte Carlo ◽  
State Vector ◽  
Basis Vector ◽  
Collective State ◽  
Dispersion Characteristics ◽  
Dipole Strength ◽  
The Third ◽  
Monte Carlo Algorithms ◽  
Third Moment ◽  
Very High

AbstractClosed expressions for the first, second, and (in some cases) the third moment of atomic transition arrays now exist. Recently a method has been developed for getting to very high moments (up to the 12th and beyond) in cases where a “collective” state-vector (i.e. a state-vector containing the entire electric dipole strength) can be created from each eigenstate in the parent configuration. Both of these approaches give exact results. Herein we describe astatistical(or Monte Carlo) approach which requires onlyonerepresentative state-vector |RV> for the entire parent manifold to get estimates of transition moments of high order. The representation is achieved through the random amplitudes associated with each basis vector making up |RV>. This also gives rise to the dispersion characterizing the method, which has been applied to a system (in the M shell) with≈250,000 lines where we have calculated up to the 5th moment. It turns out that the dispersion in the moments decreases with the size of the manifold, making its application to very big systems statistically advantageous. A discussion of the method and these dispersion characteristics will be presented.

Decomposition of the metastable beta titanium alloy Ti-15-3

1983 ◽  
Vol 41 ◽  
pp. 264-265
Author(s):  
Y. L. Chen ◽  
S. Fujlshiro
Keyword(s):  
Low Cost ◽  
High Strength ◽  
Alpha Phase ◽  
Thick Sheet ◽  
Omega Phase ◽  
Beta Titanium Alloy ◽  
Beta Titanium ◽  
Beta Matrix ◽  
Metastable Beta ◽  
Very High

Metastable beta titanium alloys have been known to have numerous advantages such as cold formability, high strength, good fracture resistance, deep hardenability, and cost effectiveness. Very high strength is obtainable by precipitation of the hexagonal alpha phase in a bcc beta matrix in these alloys. Precipitation hardening in the metastable beta alloys may also result from the formation of transition phases such as omega phase. Ti-15-3 (Ti-15V- 3Cr-3Al-3Sn) has been developed recently by TIMET and USAF for low cost sheet metal applications. The purpose of the present study was to examine the aging characteristics in this alloy.The composition of the as-received material is: 14.7 V, 3.14 Cr, 3.05 Al, 2.26 Sn, and 0.145 Fe. The beta transus temperature as determined by optical metallographic method was about 770°C. Specimen coupons were prepared from a mill-annealed 1.2 mm thick sheet, and solution treated at 827°C for 2 hr in argon, then water quenched. Aging was also done in argon at temperatures ranging from 316 to 616°C for various times.

Deformation Replication

1970 ◽  
Vol 28 ◽  
pp. 280-281
Author(s):  
J. Temple Black
Keyword(s):  
Cutting Speed ◽  
Machining Process ◽  
Depth Of Cut ◽  
Rake Face ◽  
Orthogonal Machining ◽  
Aluminum Chips ◽  
Before And After ◽  
Materials Used ◽  
Glass Knife ◽  
Very High

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.

Electron Microscopy in Molecular Biology

1967 ◽  
Vol 25 ◽  
pp. 2-3
Author(s):  
Cecil E. Hall
Keyword(s):  
Electron Microscopy ◽  
Molecular Biology ◽  
Noise Level ◽  
Molecular Structures ◽  
Material Structure ◽  
The Arts ◽  
Shadow Casting ◽  
Electron Image ◽  
High Degree ◽  
Very High

The visualization of organic macromolecules such as proteins, nucleic acids, viruses and virus components has reached its high degree of effectiveness owing to refinements and reliability of instruments and to the invention of methods for enhancing the structure of these materials within the electron image. The latter techniques have been most important because what can be seen depends upon the molecular and atomic character of the object as modified which is rarely evident in the pristine material. Structure may thus be displayed by the arts of positive and negative staining, shadow casting, replication and other techniques. Enhancement of contrast, which delineates bounds of isolated macromolecules has been effected progressively over the years as illustrated in Figs. 1, 2, 3 and 4 by these methods. We now look to the future wondering what other visions are waiting to be seen. The instrument designers will need to exact from the arts of fabrication the performance that theory has prescribed as well as methods for phase and interference contrast with explorations of the potentialities of very high and very low voltages. Chemistry must play an increasingly important part in future progress by providing specific stain molecules of high visibility, substrates of vanishing “noise” level and means for preservation of molecular structures that usually exist in a solvated condition.

Use of LaB6 for a High Quality, Small Energy Spread Beam in an Electron Velocity Spectrometer

1976 ◽  
Vol 34 ◽  
pp. 534-535 ◽  
Author(s):  
P. E. Batson ◽  
C. H. Chen ◽  
J. Silcox
Keyword(s):  
High Temperature ◽  
Energy Resolution ◽  
Electron Velocity ◽  
Electronic Excitations ◽  
Small Energy ◽  
Small Intensity ◽  
Good Energy ◽  
Spectrometer System ◽  
Electron Energy Loss ◽  
Very High

Electron energy loss experiments combined with microscopy have proven to be a valuable tool for the exploration of the structure of electronic excitations in materials. These types of excitations, however, are difficult to measure because of their small intensity. In a usual situation, the filament of the microscope is run at a very high temperature in order to present as much intensity as possible at the specimen. This results in a degradation of the ultimate energy resolution of the instrument due to thermal broadening of the electron beam.We report here observations and measurements on a new LaB filament in a microscope-velocity spectrometer system. We have found that, in general, we may retain a good energy resolution with intensities comparable to or greater than those available with the very high temperature tungsten filament. We have also explored the energy distribution of this filament.

Sign in / Sign up

Export Citation Format

Share Document