Selection of objective function for imbalanced classification: an industrial case study

Author(s):  
Abdul Rauf Khan ◽  
Henrik Schiøler ◽  
Murat Kulahci
Author(s):  
Andre´s Felipe Melo ◽  
P. John Clarkson

This paper describes a computational model that provides planning information useful for scheduling the design process. The model aims to reduce uncertainty in the design process and with it the risk of rework. The view is taken that planning is concerned with choosing between alternative actions and action sequences, but not with resource allocation. The planning model is based on an explicit representation of the state of the design process, the definition of the design capabilities as a pool of tasks, and on the generation and selection of plans by evaluating their reliability. Classical decision theory is used for evaluating the plans: a state-action net is built and analyzed as a Markov decision process. The model produces plans based on qualified task dependencies. These plans can be used as a basis for manual and automated scheduling. In an example industrial case study, a reduction of over 30% in the expected rework was predicted.


2010 ◽  
Author(s):  
Vaidehi Bhatt ◽  
Meka. Srinivasarao ◽  
Anand Dhanwani ◽  
Swapan Paruya ◽  
Samarjit Kar ◽  
...  

2017 ◽  
Vol 27 (06) ◽  
pp. 1750028 ◽  
Author(s):  
Alberto Fernández ◽  
Cristobal José Carmona ◽  
María José del Jesus ◽  
Francisco Herrera

Imbalanced classification is related to those problems that have an uneven distribution among classes. In addition to the former, when instances are located into the overlapped areas, the correct modeling of the problem becomes harder. Current solutions for both issues are often focused on the binary case study, as multi-class datasets require an additional effort to be addressed. In this research, we overcome these problems by carrying out a combination between feature and instance selections. Feature selection will allow simplifying the overlapping areas easing the generation of rules to distinguish among the classes. Selection of instances from all classes will address the imbalance itself by finding the most appropriate class distribution for the learning task, as well as possibly removing noise and difficult borderline examples. For the sake of obtaining an optimal joint set of features and instances, we embedded the searching for both parameters in a Multi-Objective Evolutionary Algorithm, using the C4.5 decision tree as baseline classifier in this wrapper approach. The multi-objective scheme allows taking a double advantage: the search space becomes broader, and we may provide a set of different solutions in order to build an ensemble of classifiers. This proposal has been contrasted versus several state-of-the-art solutions on imbalanced classification showing excellent results in both binary and multi-class problems.


2005 ◽  
Vol 29 (7) ◽  
pp. 1507-1522 ◽  
Author(s):  
N. Hvala ◽  
S. Strmčnik ◽  
D. Šel ◽  
S. Milanič ◽  
B. Banko

Author(s):  
J. DELIN ◽  
S. SHAROFF ◽  
S. LILLFORD ◽  
C. BARNES

Affective engineering is being increasingly used to describe a systematic approach to the analysis of consumer reactions to candidate designs. It has evolved from Kansei engineering, which has reported improvements in products such as cars, electronics, and food. The method includes a semantic differential experiment rating candidate designs against bipolar adjectives (e.g., attractive–not attractive, traditional–not traditional). The results are statistically analyzed to identify correlations between design features and consumer reactions to inform future product developments. A number of key challenges emerge from this process. Clearly, suitable designs must be available to cover all design possibilities. However, it is also paramount that the best adjectives are used to reflect the judgments that participants might want to make. The current adjective selection process is unsystematic, and could potentially miss key concepts. Poor adjective choices can result in problems such as misinterpretation of an experimental question, clustering of results around a particular response, and participants' confusion from unfamiliar adjectives that can be difficult to consider in the required context (e.g., is this wristwatch “oppressive”?). This paper describes an artificial intelligence supported process that ensures adjectives with appropriate levels of precision and recall are developed and presented to participants (and thus addressing problems above) in an affective engineering study in the context of branded consumer goods. We illustrate our description of the entire concept expansion and reduction process by means of an industrial case study in which participants were asked to evaluate different designs of packaging for a laundry product. The paper concludes by describing the important advantages that can be gained by the new approach in comparison with previous approaches to the selection of consumer focused adjectives.


Sains Insani ◽  
2018 ◽  
Vol 3 (2) ◽  
pp. 15-21
Author(s):  
Zulkefli Aini ◽  
Abdul Ghafar Don ◽  
Ahmad Irdha Mokhtar ◽  
Nur Uswah Ahmad Fauzi

One of the factors that can affect a person's behavior is a communication message. In the context of the da`wah, preachers who involved actively in da`wah communication with the Orang Asli should be able to ensure that the message conveyed can be understood by the target group. In addition, the selection of the correct messages of da`wah based on the foremost priority simplify the process of sharing information between the preachers and the Orang Asli. Accordingly, this article aims to identify specific topics of Islamic faith (akidah) submitted by the Orang Asli in the process of da`wah communication and to identify verbal feedback given by the preachers to the Orang Asli of the topics. This qualitative study using case study design and data was collected through semi-structured interviews. Interviews involving nine preachers were active in da`wah activity to the Orang Asli community in Selangor. Data were analyzed thematically according to the specified objectives. The study found that the topics frequently raised by the Orang Asli is concerned about belief in Allah, belief in Malaikat, and belief in Qada' and Qadar. The topics may be found within the framework of worldview in their beliefs and practice of ancient traditions. Therefore, the preachers gave verbal feedback on these topics is based on a clear and precise sample corresponding to the level of their thinking. The emphasis on these topics is very important to strengthen and purify the faith of the community.Keywords: Communication; Message; Preacher; Indigenous community Abstrak: Elemen mesej dalam komunikasi merupakan salah satu faktor yang dapat memberi kesan terhadap perubahan tingkah laku seseorang. Dalam konteks dakwah, pendakwah yang terlibat dalam proses komunikasi dakwah dengan Orang Asli seharusnya berkebolehan memastikan kandungan mesej yang disampaikan boleh difahami oleh sasaran dakwahnya. Di samping itu, pemilihan mesej dakwah yang betul mengikut keutamaan memudahkan proses perkongsian maklumat antara pendakwah dengan Orang Asli. Sehubungan dengan itu, artikel ini bertujuan untuk mengenalpasti topik-topik tertentu dalam mesej akidah yang dikemukakan oleh masyarakat Orang Asli kepada pendakwah dan mengenalpasti maklum balas lisan yang diberikan oleh pendakwah kepada Orang Asli terhadap topik tersebut. Kajian kualitatif ini menggunakan reka bentuk kajian kes dengan pengumpulan data melalui temu bual separa struktur. Temu bual melibatkan sembilan orang pendakwah yang aktif dalam aktiviti dakwah masyarakat Orang Asli di Selangor. Data kajian dianalisis secara tematik mengikut objektif yang ditentukan. Kajian ini mendapati bahawa topik-topik yang sering dikemukan oleh Orang Asli kepada pendakwah dalam penyampaian mesej akidah ialah berkenaan tentang keimanan kepada Allah SWT, keimanan kepada malaikat, dan keimanan kepada qada’ dan qadar. Topik-topik berkenaan didapati berada dalam kerangka worldview kepercayaan dan amalan tradisi mereka. Sehubungan dengan itu, pendakwah memberikan maklum balas lisan terhadap topik-topik tersebut adalah berdasarkan keterangan yang jelas dan contoh yang tepat bersesuaian dengan tahap pemikiran mereka. Penekanan terhadap topik-topik tersebut merupakan perkara yang penting dalam rangka mengukuhkan dan memurnikan akidah masyarakat Orang Asli.Kata kunci: Komunikasi; Mesej; Pendakwah; Komuniti Orang Asli


2020 ◽  
Vol 4 (02) ◽  
pp. 34-45
Author(s):  
Naufal Dzikri Afifi ◽  
Ika Arum Puspita ◽  
Mohammad Deni Akbar

Shift to The Front II Komplek Sukamukti Banjaran Project is one of the projects implemented by one of the companies engaged in telecommunications. In its implementation, each project including Shift to The Front II Komplek Sukamukti Banjaran has a time limit specified in the contract. Project scheduling is an important role in predicting both the cost and time in a project. Every project should be able to complete the project before or just in the time specified in the contract. Delay in a project can be anticipated by accelerating the duration of completion by using the crashing method with the application of linear programming. Linear programming will help iteration in the calculation of crashing because if linear programming not used, iteration will be repeated. The objective function in this scheduling is to minimize the cost. This study aims to find a trade-off between the costs and the minimum time expected to complete this project. The acceleration of the duration of this study was carried out using the addition of 4 hours of overtime work, 3 hours of overtime work, 2 hours of overtime work, and 1 hour of overtime work. The normal time for this project is 35 days with a service fee of Rp. 52,335,690. From the results of the crashing analysis, the alternative chosen is to add 1 hour of overtime to 34 days with a total service cost of Rp. 52,375,492. This acceleration will affect the entire project because there are 33 different locations worked on Shift to The Front II and if all these locations can be accelerated then the duration of completion of the entire project will be effective


2018 ◽  
Vol 12 (3) ◽  
pp. 181-187
Author(s):  
M. Erkan Kütük ◽  
L. Canan Dülger

An optimization study with kinetostatic analysis is performed on hybrid seven-bar press mechanism. This study is based on previous studies performed on planar hybrid seven-bar linkage. Dimensional synthesis is performed, and optimum link lengths for the mechanism are found. Optimization study is performed by using genetic algorithm (GA). Genetic Algorithm Toolbox is used with Optimization Toolbox in MATLAB®. The design variables and the constraints are used during design optimization. The objective function is determined and eight precision points are used. A seven-bar linkage system with two degrees of freedom is chosen as an example. Metal stamping operation with a dwell is taken as the case study. Having completed optimization, the kinetostatic analysis is performed. All forces on the links and the crank torques are calculated on the hybrid system with the optimized link lengths


Sign in / Sign up

Export Citation Format

Share Document