Relevance Evaluation of Solder Joints Attributes to Reduce the Variance of the Lifetime Model

2021 ◽  
Author(s):  
Rika Berger ◽  
Robert Schwerz ◽  
Mike Rollig ◽  
Henning Heuer
Keyword(s):  
Solder Joints ◽  
Relevance Evaluation ◽  
Lifetime Model

Predictive Failure Analysis of Solder Joints with Simultaneous High Speed EBSD and EDS

2018 ◽  
Author(s):  
J. Lindsay ◽  
P. Trimby ◽  
J. Goulden ◽  
S. McCracken ◽  
R. Andrews
Keyword(s):  
High Speed ◽  
Solder Joints ◽  
Phase Distribution ◽  
Bond Failure ◽  
Microstructural Parameters ◽  
Snpb Solder ◽  
Grain Orientations ◽  
Accelerated Thermal Cycling ◽  
The Relationship ◽  
Opening Up

Abstract The results presented here show how high-speed simultaneous EBSD and EDS can be used to characterize the essential microstructural parameters in SnPb solder joints with high resolution and precision. Analyses of both intact and failed solder joints have been carried out. Regions of strain localization that are not apparent from the Sn and Pb phase distribution are identified in the intact bond, providing key insights into the mechanism of potential bond failure. In addition, EBSD provides a wealth of quantitative detail such as the relationship between parent Sn grain orientations and Pb coarsening, the morphology and distribution of IMCs on a sub-micron scale and accurate grain size information for all phases within the joint. Such analyses enable a better understanding of the microstructural developments leading up to failure, opening up the possibility of improved accelerated thermal cycling (ATC) testing and better quality control.

Maximized lifetime model and its solution of layer-based sensor networks

2009 ◽  
Vol 29 (5) ◽  
pp. 1208-1210
Author(s):  
Hui-yong YUAN ◽  
Su-jun LI ◽  
Si-qing YANG ◽  
Jing-guo DAI
Keyword(s):  
Sensor Networks ◽  
Lifetime Model

Effect of Bi and In on Microstructure Formation in Sn-3Ag-3Bi-3In/Cu and /Ni Solder Joints

2016 ◽  
Vol 700 ◽  
pp. 142-151 ◽  
Author(s):  
Sergey A. Belyakov ◽  
Christopher M. Gourlay
Keyword(s):  
Solid Solution ◽  
Phase Equilibria ◽  
Ternary Compound ◽  
Fine Particles ◽  
Solder Joints ◽  
Primary Phase ◽  
Significant Fraction ◽  
Microstructure Formation ◽  
Five Phases

Sn-3Ag-3Bi-3In solder has been investigated to improve the understanding of microstructure formation in this solder during solidification and soldering to Cu and Ni substrates. The as-solidified microstructures of Sn-3Ag-3Bi-3In samples were found to consist of a significant fraction of βSn dendrites with a complex eutectic between the dendrites. In total five phases were observed to form during solidification: βSn, Ag3Sn, Bi, ζAg and a “Sn-In-Bi” ternary compound. Soldering of Sn-3Ag-3Bi-3In to substrates changed the phase equilibria in the system and caused the formation of additional phases: Cu6Sn5 during soldering to Cu and Ni3Sn4 and metastable NiSn4 during soldering to Ni. It is shown that metastable NiSn4 forms as a primary phase in a complex 5-component Sn-3Ag-3Bi-3In-Ni system. In and Bi were detected in solid solution in the βSn matrix in amounts of ~1.5-2at% and ~1.2at% respectively. Bi also existed as fine particles of two distinct types. (i): sub-micron (<500nm) coral-like particles and (ii) facetted particles measuring up to 7-8 μm.

scholarly journals Microstructure and shear properties of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints under thermal cycling

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jianguo Cui ◽  
Keke Zhang ◽  
Di Zhao ◽  
Yibo Pan
Keyword(s):  
Shear Strength ◽  
Thermal Cycling ◽  
Solder Joints ◽  
High Reliability ◽  
Sharp Decrease ◽  
Thermal Shock Test ◽  
Shear Properties ◽  
Equivalent Time ◽  
Ultrasonic Assisted ◽  
Reliability Of Solder Joints

AbstractThrough ultrasonic wave assisted Sn2.5Ag0.7Cu0.1RExNi/Cu (x = 0, 0.05, 0.1) soldering test and − 40 to 125 °C thermal shock test, the microstructure and shear properties of Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints under thermal cycling were studied by the SEM, EDS and XRD. The results show that the Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints with high quality and high reliability can be obtained by ultrasonic assistance. When the ultrasonic vibration power is 88 W, the ultrasonic-assisted Sn2.5Ag0.7Cu0.1RE0.05Ni/Cu solder joints exhibits the optimized performance. During the thermal cycling process, the shear strength of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints had a linear relationship with the thickness of interfacial intermetallic compound (IMC). Under the thermal cycling, the interfacial IMC layer of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints consisted of (Cu,Ni)6Sn5 and Cu3Sn. The thickness of interfacial IMC of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints was linearly related to the square root of equivalent time. The growth of interfacial IMC of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints had an incubation period, and the growth of IMC was slow within 300 cycles. And after 300 cycles, the IMC grew rapidly, the granular IMC began to merge, and the thickness and roughness of IMC increased obviously, which led to a sharp decrease in the shear strength of the solder joints. The 0.05 wt% Ni could inhibit the excessive growth of IMC, improve the shear strength of solder joints and improve the reliability of solder joints. The fracture mechanism of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints changed from the ductile–brittle mixed fracture in the solder/IMC transition zone to the brittle fracture in the interfacial IMC.

Sign in / Sign up

Export Citation Format

Share Document