Steady state hybrid thermal modelling of permanent magnet electrical machines

2016 ◽  
Author(s):  
Hamza Ennassiri ◽  
Georges Barakat ◽  
Yacine Amara
Keyword(s):  
Steady State ◽  
Permanent Magnet ◽  
Electrical Machines ◽  
Thermal Modelling

Two-dimensional steady-state thermal analytical model of permanent-magnet synchronous machines operating in generator mode

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Zakarya Djelloul Khedda ◽  
Kamel Boughrara ◽  
Frédéric Dubas ◽  
Baocheng Guo ◽  
El Hadj Ailam
Keyword(s):  
Steady State ◽  
Temperature Distribution ◽  
Permanent Magnet ◽  
Analytical Model ◽  
Electrical Machines ◽  
Synchronous Machines ◽  
Analytical Prediction ◽  
Two Dimensional ◽  
Content Type ◽  
Proposed Model

Purpose Thermal analysis of electrical machines is usually performed by using numerical methods or lumped parameter thermal networks depending on the desired accuracy. The analytical prediction of temperature distribution based on the formal resolution of thermal partial differential equations (PDEs) by the harmonic modeling technique (or the Fourier method) is uncommon in electrical machines. Therefore, this paper aims to present a two-dimensional (2D) analytical model of steady-state temperature distribution for permanent-magnet (PM) synchronous machines (PMSM) operating in generator mode. Design/methodology/approach The proposed model is based on the multi-layer models with the convolution theorem (i.e. Cauchy’s product theorem) by using complex Fourier’s series and the separation of variables method. This technique takes into the different thermal conductivities of the machine parts. The heat sources are determined by calculating the different power losses in the PMSM with the finite-element method (FEM). Findings To validate the proposed analytical model, the analytical results are compared with those obtained by thermal FEM. The comparisons show good results of the proposed model. Originality/value A new 2D analytical model based on the PDE in steady-state for full prediction of temperature distribution in the PMSM takes into account the heat transfer by conduction, convection and radiation.

scholarly journals Evolution of Axial-Field Electrical Machines

2000 ◽  
Vol 5 ◽  
pp. 227 ◽  
Author(s):  
Abdullah Al-Badi ◽  
Adel Gastli ◽  
Hadj Bourdoucen ◽  
Joseph Jervase
Keyword(s):  
Steady State ◽  
Permanent Magnet ◽  
High Power ◽  
High Efficiency ◽  
Weight Ratio ◽  
Electrical Machines ◽  
Axial Field ◽  
Radial Field ◽  
The Future

This paper is a review of axial-field electrical machines, which were at the origin of the invention of electrical machines such as the famous Faraday’s disk. The different configurations of the axial-field machines are presented along with their advantageous key steady state characteristics such as high efficiency and high power to weight ratio. The differences between axial-field machines and conventional radial-field machines are discussed. The disc-type axial-field electrical machines with permanent-magnet excitation seem to be among the best designs in terms of compactness, suitable shape, robustness, and electric characteristics. Axial-field machines are expected to be used in a large number of applications in the future owing to their special features and distinct advantages compared to conventional radial-field machines.

scholarly journals Magnetic Gears and Magnetically Geared Machines with Reduced Rare-Earth Elements for Vehicle Applications

2021 ◽  
Vol 12 (2) ◽  
pp. 52
Author(s):  
Ali Al-Qarni ◽  
Ayman EL-Refaie
Keyword(s):  
Rare Earth ◽  
Rare Earth Elements ◽  
Permanent Magnet ◽  
Electric Vehicles ◽  
Scaling Up ◽  
Electrical Machines ◽  
Mechanical Structure ◽  
Physical Isolation ◽  
Rotational Components ◽  
Rare Earth Content

This paper covers a new emerging class of electrical machines, namely, Magnetic Gears (MGs) and Magnetically Geared Machines (MGMs). This particular kind of gears/machines is capable of either scaling up or down the revolutions-per-minute to meet various load profiles as in the case of mechanical gearboxes, but with physical isolation between the rotating components. This physical isolation between the rotational components leads to several advantages in favor of MGs and MGMs over mechanical gearboxes. Although MGs and MGMs can potentially provide a solution for some of the practical issues of mechanical gears, MGs and MGMs have two major challenges that researchers have been trying to address. Those challenges are the high usage of rare-earth Permanent Magnet (PM) materials and the relatively complex mechanical structure of MGs and MGMs, both of which are a consequence of the multi-airgap design. This paper presents designs that reduce the PM rare-earth content for Electric Vehicles (EVs). Additionally, the paper will ensure having practical designs that do not run the risk of permanent demagnetization. The paper will also discuss some new designs to simplify the mechanical structure.

The magnetic and thermal modelling of the electrical machines

2020 ◽  
Author(s):  
Mehmet Alp Ilgaz ◽  
Selma Corovic ◽  
Alen Alic ◽  
Danilo Makuc ◽  
Mario Vukotic ◽  
...  
Keyword(s):  
Electrical Machines ◽  
Thermal Modelling

Motion in frequency domain for harmonic balance simulation of electrical machines

2018 ◽  
Vol 37 (4) ◽  
pp. 1449-1460
Author(s):  
Markus Wick ◽  
Sebastian Grabmaier ◽  
Matthias Juettner ◽  
Wolfgang Rucker
Keyword(s):  
Steady State ◽  
Frequency Domain ◽  
Efficient Method ◽  
Harmonic Balance ◽  
Eddy Currents ◽  
Computational Effort ◽  
Electrical Machines ◽  
Accurate Approximation ◽  
Content Type ◽  
Magnetic Devices

Purpose The high computational effort of steady-state simulations limits the optimization of electrical machines. Stationary solvers calculate a fast but less accurate approximation without eddy-currents and hysteresis losses. The harmonic balance approach is known for efficient and accurate simulations of magnetic devices in the frequency domain. But it lacks an efficient method for the motion of the geometry. Design/methodology/approach The high computational effort of steady-state simulations limits the optimization of electrical machines. Stationary solvers calculate a fast but less accurate approximation without eddy-currents and hysteresis losses. The harmonic balance approach is known for efficient and accurate simulations of magnetic devices in the frequency domain. But it lacks an efficient method for the motion of the geometry. Findings The three-phase symmetry reduces the simulated geometry to the sixth part of one pole. The motion transforms to a frequency offset in the angular Fourier series decomposition. The calculation overhead of the Fourier integrals is negligible. The air impedance approximation increases the accuracy and yields a convergence speed of three iterations per decade. Research limitations/implications Only linear materials and two-dimensional geometries are shown for clearness. Researchers are encouraged to adopt recent harmonic balance findings and to evaluate the performance and accuracy of both formulations for larger applications. Practical implications This method offers fast-frequency domain simulations in the optimization process of rotating machines and so an efficient way to treat time-dependent effects such as eddy-currents or voltage-driven coils. Originality/value This paper proposes a new, efficient and accurate method to simulate a rotating machine in the frequency domain.

scholarly journals Line-Start Permanent-Magnet Motor Single-Phase Steady-State Performance Analysis

2004 ◽  
Vol 40 (2) ◽  
pp. 516-525 ◽  
Author(s):  
T.J.E. Miller ◽  
M. Popescu ◽  
C. Cossar ◽  
M. McGilp ◽  
G. Strappazzon ◽  
...  
Keyword(s):  
Steady State ◽  
Performance Analysis ◽  
Permanent Magnet ◽  
Single Phase ◽  
Permanent Magnet Motor ◽  
Steady State Performance
Sign in / Sign up

Export Citation Format

Share Document