Scene Exchange: An Audio Processor to Replace the Background Signal for a Different Scene

Author(s):  
Akihiko K. Sugiyama ◽  
Ryoji Miyahara
Keyword(s):  
Author(s):  
John C. Russ ◽  
Nicholas C. Barbi

The rapid growth of interest in attaching energy-dispersive x-ray analysis systems to transmission electron microscopes has centered largely on microanalysis of biological specimens. These are frequently either embedded in plastic or supported by an organic film, which is of great importance as regards stability under the beam since it provides thermal and electrical conductivity from the specimen to the grid.Unfortunately, the supporting medium also produces continuum x-radiation or Bremsstrahlung, which is added to the x-ray spectrum from the sample. It is not difficult to separate the characteristic peaks from the elements in the specimen from the total continuum background, but sometimes it is also necessary to separate the continuum due to the sample from that due to the support. For instance, it is possible to compute relative elemental concentrations in the sample, without standards, based on the relative net characteristic elemental intensities without regard to background; but to calculate absolute concentration, it is necessary to use the background signal itself as a measure of the total excited specimen mass.


Viruses ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 932
Author(s):  
Annekathrin Haberland ◽  
Oxana Krylova ◽  
Heike Nikolenko ◽  
Peter Göttel ◽  
Andre Dallmann ◽  
...  

COVID-19 is a pandemic respiratory disease that is caused by the highly infectious severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Anti-SARS-CoV-2 antibodies are essential weapons that a patient with COVID-19 has to combat the disease. When now repurposing a drug, namely an aptamer that interacts with SARS-CoV-2 proteins for COVID-19 treatment (BC 007), which is, however, a neutralizer of pathogenic autoantibodies in its original indication, the possibility of also binding and neutralizing anti-SARS-CoV-2 antibodies must be considered. Here, the highly specific virus-neutralizing antibodies have to be distinguished from the ones that also show cross-reactivity to tissues. The last-mentioned could be the origin of the widely reported SARS-CoV-2-induced autoimmunity, which should also become a target of therapy. We, therefore, used enzyme-linked immunosorbent assay (ELISA) technology to assess the binding of well-characterized publicly accessible anti-SARS-CoV-2 antibodies (CV07-209 and CV07-270) with BC 007. Nuclear magnetic resonance spectroscopy, isothermal calorimetric titration, and circular dichroism spectroscopy were additionally used to test the binding of BC 007 to DNA-binding sequence segments of these antibodies. BC 007 did not bind to the highly specific neutralizing anti-SARS-CoV-2 antibody but did bind to the less specific one. This, however, was a lot less compared to an autoantibody of its original indication (14.2%, range 11.0–21.5%). It was also interesting to see that the less-specific anti-SARS-CoV-2 antibody also showed a high background signal in the ELISA (binding on NeutrAvidin-coated or activated but noncoated plastic plate). These initial experiments suggest that the risk of binding and neutralizing highly specific anti-SARS CoV-2 antibodies by BC 007 should be low.


2021 ◽  
Vol 146 ◽  
pp. 106691
Author(s):  
Anthony Berdeu ◽  
Thomas Olivier ◽  
Fabien Momey ◽  
Loïc Denis ◽  
Frédéric Pinston ◽  
...  

1995 ◽  
Vol 49 (2) ◽  
pp. 156-162 ◽  
Author(s):  
Janet S. MacFall ◽  
Anthony A. Ribeiro ◽  
Gary P. Cofer ◽  
Ko-Hsiu G. Dai ◽  
William Labiosa ◽  
...  

Development of methods for the detection and measurement of aluminum (Al) is crucial for our understanding of Al(III) chemistry and toxicity in natural waters, soil solutions, and environmental samples. Traditional colorimetric assays, by their very nature, alter solution Al(III) chemistry, potentially biasing measurements. Methods based on 27Al NMR spectroscopy have the advantage of being nondestructive and of not altering the chemistry of the solution. Standard commercial NMR probes and sample tubes, unfortunately, are constructed from aluminum-containing components. These materials give substantial background signal, which is detected as a large, broad hump, overwhelming signals from dilute samples. We describe here the construction of two novel NMR probes and a sample container built from a variety of materials with low Al content. The designs feature the use of transversely mounted solenoid coils with aluminum-free sample holders. The sample container features a second chamber which can be filled with an external reference solution. These novel 27Al NMR probes are being used for the NMR spectroscopic investigation and quantitation of natural, dilute (10−6 M) Al(III) samples from the environment.


2015 ◽  
Vol 23 (1) ◽  
Author(s):  
A. Montori ◽  
M. De Pas ◽  
M. Giuntini ◽  
M. Siciliani De Cumis ◽  
S. Viciani ◽  
...  

Abstract We describe an all−in−fibre apparatus for Constant Intensity Direct Absorption Spectroscopy (CIDAS) for gas concentration measurements which keeps the power of a diode laser constant along the frequency sweep. The reduction of the large variation of the laser power, connected to the frequency scan, enhances the ability of detecting small variations in a background signal, resulting in an increase of the sensitivity with respect to standard direct absorption techniques. Moreover, CIDAS allows for a real−time observation of the absorption signals without any kind of post−detection processing. The apparatus has been tested with carbon dioxide (CO


RSC Advances ◽  
2015 ◽  
Vol 5 (26) ◽  
pp. 20020-20024 ◽  
Author(s):  
Na Li ◽  
Zhong Feng Gao ◽  
Bei Hua Kang ◽  
Nian Bing Li ◽  
Hong Qun Luo

Amplified fluorescence target DNA detection was developed combining nicking endonuclease assisted target recycling and magnetic nanoparticles with low background signal.


2011 ◽  
Vol 301-303 ◽  
pp. 1560-1567 ◽  
Author(s):  
Man Chen ◽  
Biao Ma

The paper analyzes the failure mechanism of the wet shifting clutch, and puts forward the concept that the deformation of the clutch friction plate leads to the irregular collision between the driving and driven sides of disengaged clutch and accordingly forms the transient pulse signal; the short-time Fourier analysis on the vibration signals of failed clutch obtained via test proves such concept. The transient pulse signal in the relatively strong background signal is clearly extracted through the wavelet decomposition after zero setting, and an efficient wet shifting clutch fault diagnosis method is hereby formed.


2010 ◽  
Vol 82 (10) ◽  
Author(s):  
Daniel T. Cumberbatch ◽  
Massimiliano Lattanzi ◽  
Joseph Silk

2016 ◽  
Vol 52 (70) ◽  
pp. 10660-10663 ◽  
Author(s):  
Qingwang Xue ◽  
Wei Jiang ◽  
Lei Wang

Here we developed a simple, sensitive and accurate PLD detection method based on a target-controlled gating liposome (TCGL) “off–on” cascade amplified strategy and personal glucose meters (PGMs).


Sign in / Sign up

Export Citation Format

Share Document