Abstract
A high-resolution, low offset delta-sigma analog to digital converter for detecting photoplethysmography (PPG) signal is presented in this study. The PPG signal is a bio-optical signal incorporated with heart functionality and located in the range of 0.1–10 Hz. The location to get PPG signal is on a pulsating artery. Thus the delta-sigma analog-to-digital (DS ADC) converter is designed specifically in that range. However, the DS ADC circuitry suffers from 1/f noise under 10 Hz frequency range. A chopper based operational amplifier is implemented in DS ADC to push the 1/f noise into high-frequency noise. The dc offset of the operational amplifier is also pushed to the high-frequency region. The DS ADC circuitry consists of a second-order continuous-time delta-sigma modulator. The delta-sigma modulator circuitry is designed and simulated using TSMC 180 nm technology. The continuous-time delta-sigma modulator active area layout is 746μm × 399 μm and fabricated using TSMC 180 nm technology. It operates in 100 Hz bandwidth and 4096 over-sampling ratios. The SFDR of the circuit is above 70 dB. The power consumption of the delta-sigma modulator is 35.61μW. The simulation is performed in three different kinds of corner, SS, TT, and FF corner, to guarantee the circuitry works in different conditions.
A Second-order 16.5 Bit Analog-to-Digital Converter with a 145 dB Operational Amplifier Gain
