MCM-L as a cost-effective solution for high-speed digital design

2002 ◽  
Author(s):  
A. Thiel ◽  
C. Habiger ◽  
G. Troster
Keyword(s):  
High Speed ◽  
Cost Effective ◽  
Digital Design ◽  
Effective Solution

A NOVEL FPGA-BASED APPROACH FOR DIGITAL WAVEFORM GENERATION USING ORTHOGONAL FUNCTIONS

2007 ◽  
Vol 16 (06) ◽  
pp. 895-909 ◽  
Author(s):  
SYED MANZOOR QASIM ◽  
SHUJA AHMAD ABBASI
Keyword(s):  
High Speed ◽  
Cost Effective ◽  
Digital Design ◽  
Waveform Generator ◽  
Orthogonal Functions ◽  
Orthogonal Function ◽  
Waveform Generation ◽  
Novel Approach ◽  
Field Programmable ◽  
On Chip

This paper presents a novel approach for the generation of periodic waveforms in digital form using Field Programmable Gate Array (FPGA) and orthogonal functions. The orthogonal function consists of a set of Rademacher–Walsh Functions, and utilizing these functions, virtually any periodic waveform can be synthesized. Recent technological advancements in FPGA and availability of sophisticated digital design tools have made it possible to realize high-speed waveform generator in a cost-effective way. We demonstrate the proposed technique for the successful generation of Trapezoidal, Sinusoidal, Triangular waveforms, and a complex version of these waveforms. Simulation results for the various waveforms implemented in Xilinx Spartan-3 (XC3S200-4FT256) FPGA are presented both in analog and digital forms, and validated in MATLAB. The designed circuit can be easily integrated as a module for System-on-Chip (SoC) for on-chip waveform generation

The Radio Probe™: A New Measurement Tool for High Speed Integrated Circuits

2005 ◽  
Author(s):  
Mark Kimball
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
High Speed ◽  
Attenuation Factor ◽  
Cost Effective ◽  
Frequency Measurement ◽  
Single Frequency ◽  
Measurement Tool ◽  
Probe Design ◽  
Differential Measurement

Abstract This article presents a novel tool designed to allow circuit node measurements in a radio frequency (RF) integrated circuit. The discussion covers RF circuit problems; provides details on the Radio Probe design, which achieves an input impedance of 50Kohms and an overall attenuation factor of 0 dB; and describes signal to noise issues in the output signal, along with their improvement techniques. This cost-effective solution incorporates features that make it well suited to the task of differential measurement of circuit nodes within an RF IC. The Radio Probe concept offers a number of advantages compared to active probes. It is a single frequency measurement tool, so it complements, rather than replaces, active probes.

scholarly journals 2D-3D integration of hexagonal boron nitride and a high-κ dielectric for ultrafast graphene-based electro-absorption modulators

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Hitesh Agarwal ◽  
Bernat Terrés ◽  
Lorenzo Orsini ◽  
Alberto Montanaro ◽  
Vito Sorianello ◽  
...  
Keyword(s):  
Boron Nitride ◽  
Hafnium Oxide ◽  
High Speed ◽  
Hexagonal Boron Nitride ◽  
Temperature Stability ◽  
Cost Effective ◽  
Fold Increase ◽  
Building Blocks ◽  
High Quality ◽  
New Device

AbstractElectro-absorption (EA) waveguide-coupled modulators are essential building blocks for on-chip optical communications. Compared to state-of-the-art silicon (Si) devices, graphene-based EA modulators promise smaller footprints, larger temperature stability, cost-effective integration and high speeds. However, combining high speed and large modulation efficiencies in a single graphene-based device has remained elusive so far. In this work, we overcome this fundamental trade-off by demonstrating the 2D-3D dielectric integration in a high-quality encapsulated graphene device. We integrated hafnium oxide (HfO2) and two-dimensional hexagonal boron nitride (hBN) within the insulating section of a double-layer (DL) graphene EA modulator. This combination of materials allows for a high-quality modulator device with high performances: a ~39 GHz bandwidth (BW) with a three-fold increase in modulation efficiency compared to previously reported high-speed modulators. This 2D-3D dielectric integration paves the way to a plethora of electronic and opto-electronic devices with enhanced performance and stability, while expanding the freedom for new device designs.

scholarly journals Scale-Up Preparation of Crocins I and II from Gardeniajasminoides by a Two-Step Chromatographic Approach and Their Inhibitory Activity Against ATP Citrate Lyase

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3137
Author(s):  
Shuguang Guan ◽  
Qiaoli Pu ◽  
Yinan Liu ◽  
Honghong Wu ◽  
Wenbo Yu ◽  
...  
Keyword(s):  
Inhibitory Activity ◽  
High Speed ◽  
Scale Up ◽  
Cost Effective ◽  
Atp Citrate Lyase ◽  
Gardenia Jasminoides ◽  
Citrate Lyase ◽  
Human Disorders ◽  
Ic50 Values ◽  
Counter Current

Crocins are highly valuable natural compounds for treating human disorders, and they are also high-end spices and colorants in the food industry. Due to the limitation of obtaining this type of highly polar compound, the commercial prices of crocins I and II are expensive. In this study, macroporous resin column chromatography combined with high-speed counter-current chromatography (HSCCC) was used to purify crocins I and II from natural sources. With only two chromatographic steps, both compounds were simultaneously isolated from the dry fruit of Gardenia jasminoides, which is a cheap herbal medicine distributed in a number of countries. In an effort to shorten the isolation time and reduce solvent usage, forward and reverse rotations were successively utilized in the HSCCC isolation procedure. Crocins I and II were simultaneously obtained from a herbal resource with high recoveries of 0.5% and 0.1%, respectively, and high purities of 98.7% and 99.1%, respectively, by HPLC analysis. The optimized preparation method was proven to be highly efficient, convenient, and cost-effective. Crocins I and II exhibited inhibitory activity against ATP citrate lyase, and their IC50 values were determined to be 36.3 ± 6.24 and 29.7 ± 7.41 μM, respectively.

Narrowing longitudinally coupled prefabricated slab track maintenance duration with field data analysis of slab deformation under high temperature

2021 ◽  
pp. 095440972098626
Author(s):  
Zai-Wei Li ◽  
Xiao-Zhou Liu ◽  
Hong-Yao Lu ◽  
Yue-Lei He
Keyword(s):  
High Temperature ◽  
High Speed ◽  
Ride Comfort ◽  
Cost Effective ◽  
Periodic Variation ◽  
Longitudinal Force ◽  
Distribution Analysis ◽  
High Speed Rail ◽  
Track Maintenance ◽  
Slab Track

The deformation of longitudinally coupled prefabricated slab track (LCPST) due to high temperature may lead to a reduction in ride comfort and safety in high-speed rail (HSR) operation. It is thus critical to understand and track the development of such defects. This study develops an online monitoring system to analyze LCPST deformation at different slab depths under various temperatures. The trackside system, powered by solar energy with STM8L core that is ultra-low in energy consumption, is used to collect data of LCPST deformation and temperature level uninterruptedly. With canonical correlation analysis, it is found that LCPST deformation presents similar periodic variation to yearly temperature fluctuation and large longitudinal force may be generated as heat accumulates in summer, thereby causing track defects. Then the distribution of temperature and deformation data is categorized based on fuzzy c-means clustering. Through the distribution analysis, it is suggested that slab inspection can be shortened to 6 hours, i.e. from 10:00 am to 4:00 pm, reducing 14.3% track inspection workload from the current practice. The price of workload reduction is only a 2% chance of missed detection of slab deformation. The finding of this research can be used to enhance LCPST monitoring efficiency and reduce interruption to HSR operation, which is an essential step in promoting reliable and cost-effective track service.

Sign in / Sign up

Export Citation Format

Share Document