Software package "Materials Designer" and its application in materials research

1999 ◽  
Author(s):  
Chen Nianyi ◽  
Lu Wencong ◽  
Chen Ruiliang ◽  
Qin Pei
Keyword(s):  
Software Package ◽  
Materials Research ◽  
Package Materials

Quanitative aspects of electron diffraction using electron holography

1995 ◽  
Vol 53 ◽  
pp. 616-617
Author(s):  
E. Völkl ◽  
L.F. Allard ◽  
B. Frost ◽  
T.A. Nolan
Keyword(s):  
Electron Beam ◽  
Electron Diffraction ◽  
Software Package ◽  
Spatial Coherence ◽  
Electron Holography ◽  
Image Intensity ◽  
Interference Fringes ◽  
Complex Image ◽  
The Difference ◽  
Recorded Image

Off-axis electron holography has the well known ability to preserve the complex image wave within the final, recorded image. This final image described by I(x,y) = I(r) contains contributions from the image intensity of the elastically scattered electrons IeI (r) = |A(r) exp (iΦ(r)) |, the contributions from the inelastically scattered electrons IineI (r), and the complex image wave Ψ = A(r) exp(iΦ(r)) as:(1) I(r) = IeI (r) + Iinel (r) + μ A(r) cos(2π Δk r + Φ(r))where the constant μ describes the contrast of the interference fringes which are related to the spatial coherence of the electron beam, and Φk is the resulting vector of the difference of the wavefront vectors of the two overlaping beams. Using a software package like HoloWorks, the complex image wave Ψ can be extracted.

High-voltage Electron Microscopy: Where it is and where it may be going

1995 ◽  
Vol 53 ◽  
pp. 80-81
Author(s):  
Charles W. Allen
Keyword(s):  
Electron Microscopy ◽  
High Voltage ◽  
Construction Cost ◽  
Research Community ◽  
High Voltage Electron Microscopy ◽  
Voltage Electron ◽  
High Voltage Electron ◽  
Materials Research

High voltage TEMs were introduced commercially thirty years ago, with the installations of 500 kV Hitachi instruments at the Universities of Nogoya and Tokyo. Since that time a total of 51 commercial instruments, having maximum accelerating potentials of 0.5-3.5 MV, have been delivered. Prices have gone from about a dollar per volt for the early instruments to roughly twenty dollars per volt today, which is not so unreasonable considerinp inflation and vastly improved electronics and other improvements. The most expensive HVEM (the 3.5 MV instrument at Osaka University) cost about 5 percent of the construction cost of the USA's latest synchrotron.Table 1 briefly traces the development of HVEM in this country for the materials sciences. There are now only three available instruments at two sites: the 1.2 MeV HVEM at Argonne National Lab, and 1.0 and 1.5 MeV instruments at Lawrence Berkeley National Lab. Fortunately, both sites are user facilities funded by DOE for the materials research community.

Computer programs for the calculation of x-ray intensities emitted by elements in multi-layer structures

1990 ◽  
Vol 48 (2) ◽  
pp. 216-217
Author(s):  
G.F. Bastin ◽  
H.J.M. Heijligers ◽  
J.M. Dijkstra
Keyword(s):  
Software Package ◽  
Light Element ◽  
Matrix Correction ◽  
Excellent Performance ◽  
Element Analysis ◽  
X Ray ◽  
Know How ◽  
Accurate Knowledge ◽  
Layer Structures ◽  
Bulk Matrix

For the calculation of X-ray intensities emitted by elements present in multi-layer systems it is vital to have an accurate knowledge of the x-ray ionization vs. mass-depth (ϕ(ρz)) curves as a function of accelerating voltage and atomic number of films and substrate. Once this knowledge is available the way is open to the analysis of thin films in which both the thicknesses as well as the compositions can usually be determined simultaneously.Our bulk matrix correction “PROZA” with its proven excellent performance for a wide variety of applications (e.g., ultra-light element analysis, extremes in accelerating voltage) has been used as the basis for the development of the software package discussed here. The PROZA program is based on our own modifications of the surface-centred Gaussian ϕ(ρz) model, originally introduced by Packwood and Brown. For its extension towards thin film applications it is required to know how the 4 Gaussian parameters α, β, γ and ϕ(o) for each element in each of the films are affected by the film thickness and the presence of other layers and the substrate.

Composite right/left-handed transmission line with array of thermocouples for generating terahertz radiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20502
Author(s):  
Behrokh Beiranvand ◽  
Alexander S. Sobolev ◽  
Anton V. Kudryashov
Keyword(s):  
Transmission Line ◽  
Terahertz Radiation ◽  
Transmission Lines ◽  
Software Package ◽  
Optical Pulses ◽  
Capacitively Coupled ◽  
Voltage Difference ◽  
Left Handed ◽  
Microwave Transmission ◽  
Commercial Software Package

We present a new concept of the thermoelectric structure that generates microwave and terahertz signals when illuminated by femtosecond optical pulses. The structure consists of a series array of capacitively coupled thermocouples. The array acts as a hybrid type microwave transmission line with anomalous dispersion and phase velocity higher than the velocity of light. This allows for adding up the responces from all the thermocouples in phase. The array is easily integrable with microstrip transmission lines. Dispersion curves obtained from both the lumped network scheme and numerical simulations are presented. The connection of the thermocouples is a composite right/left-handed transmission line, which can receive terahertz radiation from the transmission line ports. The radiation of the photon to the surface of the thermocouple structure causes a voltage difference with the bandwidth of terahertz. We examined a lossy composite right/left-handed transmission line to extract the circuit elements. The calculated properties of the design are extracted by employing commercial software package CST STUDIO SUITE.

ANALISIS VARIASI JUMLAH SUDU TURBIN BERPENAMPANG PELAT DATAR PADA TURBIN AIR ALIRAN VORTEX DENGAN TIPE SALURAN MASUK INVOLUTE

2020 ◽  
Vol 7 (2) ◽  
pp. 72-78
Author(s):  
Adnan Al Farisi ◽  
Yopi Handoyo ◽  
Taufiqur Rokhman
Keyword(s):  
Power Plant ◽  
Alternative Energy ◽  
Vortex Flow ◽  
Experimental Methods ◽  
Turbine Efficiency ◽  
A Value ◽  
Current Voltage ◽  
Materials Research ◽  
The One ◽  
Flow Vortex

The One of alternative energy that is environmentally friendly is by untilize water energy and turn it into a Microhydro power plant. Microhydro power plant usually made from utilize the waterfall with the head fell. While utilization for streams with a head small drop is not optimal yet. This is a reference to doing research on harnessing the flow of a river that has a value of head low between 0.7 m – 1.4 m with turning it into a Vortex flow (vortex). The purpose of this research is to know  the effect variation number of blade on power and efficiency in the vortex turbine. This research uses experimental methods to find current, voltage, torque and rpm using a reading instrument. The materials research vortex turbine used 6 blade, 8 blade and 10 blade with flat plate. The result showed the highest efficiency is 29,93 % with produce turbine power is 19,58 W, generated on turbine with variation 10 blade with load 3,315 kg and the capacity of water 10,14 l/s. Followed with an efficiency 24,17% and produce turbine power is 15,81 W, generated on turbine with the variation 8 blade with load 3,315 kg and the capacity of water is 10,14 l/s. The the lowest turbine efficiency 22,32% with produce tuebine power 14,60 W, generated on turbine with the variation 6 blade with load 3,315 kg, the capacity of water is 10,14 l/s.

Modeling And Optimization Of The Construction Organization's Production Program

2020 ◽  
pp. 49-56
Keyword(s):  
Software Package ◽  
Target Function ◽  
Optimization Models ◽  
Labor Resource ◽  
Production Program ◽  
Construction Organizations ◽  
Source Data ◽  
Labor Resources ◽  
Construction Organization ◽  
Planning Production

In the article, the author considers the problems of complex algorithmization and systematization of approaches to optimizing the work plans of construction organizations (calendar plans) using various modern tools, including, for example, evolutionary algorithms for "conscious" enumeration of options for solving a target function from an array of possible constraints for a given nomenclature. Various typical schemes for modeling the processes of distribution of labor resources between objects of the production program are given, taking into account the array of source data. This data includes the possibility of using the material and technical supply base (delivery, storage, packaging) as a temporary container for placing the labor resource in case of released capacity, quantitative and qualification composition of the initial labor resource, the properties of the construction organization as a counterparty in the contract system with the customer of construction and installation works etc. A conceptual algorithm is formed that is the basis of the software package for operational harmonization of the production program ( work plans) in accordance with the loading of production units, the released capacities of labor resources and other conditions stipulated by the model. The application of the proposed algorithm is most convenient for a set of objects, which determines the relevance of its implementation in optimization models when planning production programs of building organizations that contain several objects distributed over a time scale.

Assessment of serum interleukin-6 with a rapid test. The diagnosis of neonatal sepsis can be established or ruled out

2007 ◽  
Vol 148 (34) ◽  
pp. 1609-1614 ◽  
Author(s):  
Éva Görbe ◽  
Judit Jeager ◽  
Bálint Nagy ◽  
Ágnes Harmath ◽  
Erik Hauzman ◽  
...  
Keyword(s):  
Interleukin 6 ◽  
Neonatal Sepsis ◽  
Software Package ◽  
Rapid Test ◽  
Statistical Software

Bevezetés: A neonatális szepszis mortalitása magas, és koraszülöttek esetén a szepszis rizikója emelkedik a születési súly csökkenésével. Anyag és módszer: A szerzők gyorsteszt segítségével 12 érett újszülött és 60 igen kis súlyú (VLBW) koraszülött interleukin-6-vérszintjét határozták meg a C-reaktív protein vizsgálatával egyidejűleg, akiket a Semmelweis Egyetem I. Számú Szülészeti és Nőgyógyászati Klinikájának Neonatális Intenzív Centrumában kezeltek 2005-ben és 2006-ban. A szérum-IL-6 meghatározása gyorsteszt segítségével történt (Milenia Quickline IL-6, PicoScan system). Eredmények: Vizsgálataikban a szérum-interleukin-6- és CRP-meghatározás korrelált. A szérum-IL-6-meghatározás szenzitivitása a CRP-értékkel együtt az általuk vizsgált betegcsoportban 100% volt, álnegatív eset nem fordult elő. A vizsgálat pozitív prediktív értéke 93%. Adataikat Mann–Whitney-teszt segítségével analizálták (SPSS Statistical Software Package, Chicago, IL, USA). Szignifikáns különbség volt az igazolt szepszis és az infekciós betegcsoport IL-6-értékei között ( p = 0,048), valamint az infekciós és nem infekciós csoport interleukin-6-értékei között ( p < 0,005). Következtetések: Az igen kis súlyúak nem specifikus infekciós tünetekhez hasonló reakcióit értékelve, a szeptikus és nem infekciós esetek elkülönítése a neonatális morbiditás és mortalitás csökkentése érdekében is fontos szempont, a költségek csökkentésével egyidejűleg.

Sign in / Sign up

Export Citation Format

Share Document