Bidirectional Peripheral Nerve Interface With 64 Second-Order Opamp-Less ΔΣ ADCs and Fully Integrated Wireless Power/Data Transmission

This paper presents a fully integrated physical layer (PHY) transmitter (TX) suiting for multiple industrial protocols and compatible with different protocol versions. Targeting a wide operating range, the LC-based phase-locked loop (PLL) with a dual voltage-controlled oscillator (VCO) was integrated to provide the low jitter clock. Each lane with a configurable serialization scheme was adapted to adjust the data rate flexibly. To achieve high-speed data transmission, several bandwidth-extended techniques were introduced, and an optimized output driver with a 3-tap feed-forward equalizer (FFE) was proposed to accomplish high-quality data transmission and equalization. The TX prototype was fabricated in a 28-nm CMOS process, and a single-lane TX only occupied an active area of 0.048 mm2. The shared PLL and clock distribution circuits occupied an area of 0.54 mm2. The proposed PLL can support a tuning range that covers 6.2 to 16 GHz. Each lane's data rate ranged from 1.55 to 32 Gb/s, and the energy efficiency is 1.89 pJ/bit/lane at a 32-Gb/s data rate and can tune an equalization up to 10 dB.

Download Full-text

Recent Advances in Wearable Devices for Non-Invasive Sensing

Applied Sciences ◽

10.3390/app11031235 ◽

2021 ◽

Vol 11 (3) ◽

pp. 1235

Author(s):

Su Min Yun ◽

Moohyun Kim ◽

Yong Won Kwon ◽

Hyobeom Kim ◽

Mi Jung Kim ◽

...

Keyword(s):

Health Monitoring ◽

Data Transmission ◽

Wearable Sensors ◽

Wearable Devices ◽

Wireless Power ◽

Non Invasive ◽

Sensing Systems ◽

Recent Advances ◽

Wearable Systems ◽

Precise Diagnosis

The development of wearable sensors is aimed at enabling continuous real-time health monitoring, which leads to timely and precise diagnosis anytime and anywhere. Unlike conventional wearable sensors that are somewhat bulky, rigid, and planar, research for next-generation wearable sensors has been focused on establishing fully-wearable systems. To attain such excellent wearability while providing accurate and reliable measurements, fabrication strategies should include (1) proper choices of materials and structural designs, (2) constructing efficient wireless power and data transmission systems, and (3) developing highly-integrated sensing systems. Herein, we discuss recent advances in wearable devices for non-invasive sensing, with focuses on materials design, nano/microfabrication, sensors, wireless technologies, and the integration of those.

Download Full-text

Electronic design for an implantable wireless power and data transmission system

2008 9th International Conference on Solid-State and Integrated-Circuit Technology ◽

10.1109/icsict.2008.4735101 ◽

2008 ◽

Author(s):

Kui Zou ◽

Xiuhan Li ◽

Jinbin Hu ◽

Haixia Zhang

Keyword(s):

Data Transmission ◽

Transmission System ◽

Wireless Power ◽

Data Transmission System ◽

Electronic Design

Download Full-text

Fully integrated 60 GHz transceiver in SiGe BiCMOS, RF modules, and 3.6 Gbit/s OFDM data transmission

International Journal of Microwave and Wireless Technologies ◽

10.1017/s1759078711000286 ◽

2011 ◽

Vol 3 (2) ◽

pp. 139-145 ◽

Cited By ~ 10

Author(s):

Srdjan Glisic ◽

J. Christoph Scheytt ◽

Yaoming Sun ◽

Frank Herzel ◽

Ruoyu Wang ◽

...

Keyword(s):

Data Transmission ◽

Intermediate Frequency ◽

Phase Locked Loop ◽

Data Rate ◽

Low Noise ◽

60 Ghz ◽

Fully Integrated ◽

Front End ◽

Free Data ◽

Bicmos Technology

A fully integrated transmitter (TX) and receiver (RX) front-end chipset, produced in 0.25 µm SiGe:C bipolar and complementary metal oxide semiconductor (BiCMOS) technology, is presented. The front-end is intended for high-speed wireless communication in the unlicensed ISM band of 9 GHz around 60 GHz. The TXand RX features a modified heterodyne topology with a sliding intermediate frequency. The TX features a 12 GHz in-phase and quadrature (I/Q) mixer, an intermediate frequency (IF) amplifier, a phase-locked loop, a 60 GHz mixer, an image-rejection filter, and a power amplifier. The RX features a low-noise amplifier (LNA), a 60 GHz mixer, a phase-locked loop (PLL), and an IF demodulator. The measured 1-dB compression point at the TX output is 12.6 dBm and the saturated power is 16.2 dBm. The LNA has measured noise figure of 6.5 dB at 60 GHz. Error-free data transmission with a 16 quadrature amplitude modulation (QAM) orthogonal frequency-division multiplexing (OFDM) signal and data rate of 3.6 Gbit/s (without coding 4.8 Gbit/s) over 15 m was demonstrated. This is the best reported result regarding both the data rate and transmission distance in SiGe and CMOS without beamforming.

Download Full-text