Radar & additive manufacturing technologies: The future of Internet of Things (IoT)

2018 ◽  
Author(s):  
Jimmy G.D. Hester ◽  
John Kimionis ◽  
Ryan Bahr ◽  
Wenjing Su ◽  
Bijan Tehrani ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Internet Of Things ◽  
The Future ◽  
Manufacturing Technologies

scholarly journals Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

2021 ◽  
Vol 6 (1) ◽  
pp. 4
Author(s):  
Seymur Hasanov ◽  
Suhas Alkunte ◽  
Mithila Rajeshirke ◽  
Ankit Gupta ◽  
Orkhan Huseynov ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Research And Development ◽  
Manufacturing Processes ◽  
Material Interfaces ◽  
Material Compatibility ◽  
The Future ◽  
Materials Used ◽  
Future Direction ◽  
Manufacturing Technologies ◽  
Functional Components

Additive manufacturing has already been established as a highly versatile manufacturing technique with demonstrated potential to completely transform conventional manufacturing in the future. The objective of this paper is to review the latest progress and challenges associated with the fabrication of multi-material parts using additive manufacturing technologies. Various manufacturing processes and materials used to produce functional components were investigated and summarized. The latest applications of multi-material additive manufacturing (MMAM) in the automotive, aerospace, biomedical and dentistry fields were demonstrated. An investigation on the current challenges was also carried out to predict the future direction of MMAM processes. It was concluded that further research and development is needed in the design of multi-material interfaces, manufacturing processes and the material compatibility of MMAM parts.

scholarly journals Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

2021 ◽  
Author(s):  
Seymur Hasanov ◽  
Suhas Alkunte ◽  
Mithila Rajeshirke ◽  
Ankit Gupta ◽  
Orkhan Huseynov ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Research And Development ◽  
Manufacturing Processes ◽  
Material Interfaces ◽  
Material Compatibility ◽  
The Future ◽  
Materials Used ◽  
Future Direction ◽  
Manufacturing Technologies ◽  
Functional Components

Additive manufacturing has already been established as a highly versatile manufacturing technique with demonstrated potential to completely transform conventional manufacturing in the future. The objective of this paper is to review the latest progress and challenges associated with the fabrication of multi-material parts using additive manufacturing technologies. Various manufacturing processes and materials used to produce functional components were investigated and summarized. The latest applications of multi-material additive manufacturing (MMAM) in automotive, aerospace, biomedical and dentistry field were demonstrated. Investigation on the current challenges were also carried out to predict the future direction of MMAM processes. It is concluded that the further research and development needed in the design of multi-material interfaces, manufacturing processes and material compatibility of MMAM parts are necessary.

scholarly journals A STRUCTURED APPROACH TO REDUCE DESIGN ITERATIONS IN ADDITIVE MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 231-240
Author(s):  
Laura Wirths ◽  
Matthias Bleckmann ◽  
Kristin Paetzold
Keyword(s):  
Additive Manufacturing ◽  
Spare Parts ◽  
Design Guidelines ◽  
Final Part ◽  
Layer By Layer ◽  
Powder Bed ◽  
Batch Sizes ◽  
Manufacturing Technologies ◽  
Structured Approach ◽  
Design Freedom

AbstractAdditive Manufacturing technologies are based on a layer-by-layer build-up. This offers the possibility to design complex geometries or to integrate functionalities in the part. Nevertheless, limitations given by the manufacturing process apply to the geometric design freedom. These limitations are often unknown due to a lack of knowledge of the cause-effect relationships of the process. Currently, this leads to many iterations until the final part fulfils its functionality. Particularly for small batch sizes, producing the part at the first attempt is very important. In this study, a structured approach to reduce the design iterations is presented. Therefore, the cause-effect relationships are systematically established and analysed in detail. Based on this knowledge, design guidelines can be derived. These guidelines consider process limitations and help to reduce the iterations for the final part production. In order to illustrate the approach, the spare parts production via laser powder bed fusion is used as an example.

scholarly journals Adhesion Studies during Generative Hybridization of Textile-Reinforced Thermoplastic Composites via Additive Manufacturing

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3888
Author(s):  
Johanna Maier ◽  
Christian Vogel ◽  
Tobias Lebelt ◽  
Vinzenz Geske ◽  
Thomas Behnisch ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Polyamide 6 ◽  
Thermoplastic Composites ◽  
Efficient Production ◽  
Angle Measurements ◽  
Small Series ◽  
Contact Angle Measurements ◽  
Static Tensile ◽  
Pre Treatment ◽  
Manufacturing Technologies

Generative hybridization enables the efficient production of lightweight structures by combining classic manufacturing processes with additive manufacturing technologies. This type of functionalization process allows components with high geometric complexity and high mechanical properties to be produced efficiently in small series without the need for additional molds. In this study, hybrid specimens were generated by additively depositing PA6 (polyamide 6) via fused layer modeling (FLM) onto continuous woven fiber GF/PA6 (glass fiber/polyamide 6) flat preforms. Specifically, the effects of surface pre-treatment and process-induced surface interactions were investigated using optical microscopy for contact angle measurements as well as laser profilometry and thermal analytics. The bonding characteristic at the interface was evaluated via quasi-static tensile pull-off tests. Results indicate that both the bond strength and corresponding failure type vary with pre-treatment settings and process parameters during generative hybridization. It is shown that both the base substrate temperature and the FLM nozzle distance have a significant influence on the adhesive tensile strength. In particular, it can be seen that surface activation by plasma can significantly improve the specific adhesion in generative hybridization.

scholarly journals MODEL-BASED DESIGN OF AM COMPONENTS TO ENABLE DECENTRALIZED DIGITAL MANUFACTURING SYSTEMS

2021 ◽  
Vol 1 ◽  
pp. 2127-2136
Author(s):  
Olivia Borgue ◽  
John Stavridis ◽  
Tomas Vannucci ◽  
Panagiotis Stavropoulos ◽  
Harry Bikas ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Systems ◽  
Production Systems ◽  
Data Generation ◽  
Production Networks ◽  
Model Based ◽  
Manufacturing Technologies ◽  
Am Processes ◽  
Final Consumer

AbstractAdditive manufacturing (AM) is a versatile technology that could add flexibility in manufacturing processes, whether implemented alone or along other technologies. This technology enables on-demand production and decentralized production networks, as production facilities can be located around the world to manufacture products closer to the final consumer (decentralized manufacturing). However, the wide adoption of additive manufacturing technologies is hindered by the lack of experience on its implementation, the lack of repeatability among different manufacturers and a lack of integrated production systems. The later, hinders the traceability and quality assurance of printed components and limits the understanding and data generation of the AM processes and parameters. In this article, a design strategy is proposed to integrate the different phases of the development process into a model-based design platform for decentralized manufacturing. This platform is aimed at facilitating data traceability and product repeatability among different AM machines. The strategy is illustrated with a case study where a car steering knuckle is manufactured in three different facilities in Sweden and Italy.

The future of using Internet of Things (loTs) and Context-Aware Technology in E-learning

2020 ◽  
Author(s):  
Mohamed A. Amasha ◽  
Marwa F. Areed ◽  
Salem Alkhalaf ◽  
Rania A. Abougalala ◽  
Safaa M. Elatawy ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Context Aware ◽  
The Future ◽  
E Learning

scholarly journals Influence of Deposition Patterns on Distortion of H13 Steel by Wire-Arc Additive Manufacturing

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 485
Author(s):  
Xufeng Li ◽  
Jian Lin ◽  
Zhidong Xia ◽  
Yongqiang Zhang ◽  
Hanguang Fu
Keyword(s):  
Additive Manufacturing ◽  
Temperature History ◽  
H13 Steel ◽  
Deposition Patterns ◽  
Field Distortion ◽  
Set Up ◽  
Manufacturing Technologies ◽  
Inherent Strain ◽  
Inherent Strain Method ◽  
Wire Arc Additive Manufacturing

Wire-arc additive manufacturing (WAAM) has been considered as one of the potential additive-manufacturing technologies to fabricate large components. However, its industrial application is still limited by the existence of stress and distortion. During the process of WAAM, the scanning pattern has an important influence on the temperature field, distortion and final quality of the part. Four kinds of deposition patterns, including sequence, symmetry, in–out and out–in, were designed to deposit H13 steel in this study. An in situ measurement system was set up to record the temperature history and the progress of accumulated distortion of the parts during deposition. An S value was proposed to evaluate the distortion of the substrate. It was shown that the distortion of the part deposited by sequence was significantly larger than those of other parts. The distortion deposited by the out–in pattern decreased by 68.6% compared with sequence. The inherent strain method and strain parameter were introduced to expose the mechanism of distortion reduction caused by pattern variation.

Sign in / Sign up

Export Citation Format

Share Document