Design of patch antenna with omni directional radiation pattern for wireless LAN applications

2017 ◽  
Author(s):  
D. Punniamoorthy ◽  
G. Krishna Reddy ◽  
Vikram S. Kamadal ◽  
G. Venu Gopal ◽  
K. Poornachary
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Wireless Lan ◽  
Directional Radiation

scholarly journals An Octagonal Ring-shaped Parasitic Resonator Based Compact Ultrawideband Antenna for Microwave Imaging Applications

Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1354 ◽  
Author(s):  
Amran Hossain ◽  
Mohammad Tariqul Islam ◽  
Ali F. Almutairi ◽  
Mandeep Singh Jit Singh ◽  
Kamarulzaman Mat ◽  
...  
Keyword(s):  
Experimental Data ◽  
Reflection Coefficient ◽  
Radiation Pattern ◽  
Patch Antenna ◽  
Ground Plane ◽  
Microwave Imaging ◽  
Average Efficiency ◽  
Antenna Performance ◽  
Directional Radiation ◽  
Radiation Directivity

An Ultrawideband (UWB) octagonal ring-shaped parasitic resonator-based patch antenna for microwave imaging applications is presented in this study, which is constructed with a diamond-shaped radiating patch, three octagonal, rectangular slotted ring-shaped parasitic resonator elements, and partial slotting ground plane. The main goals of uses of parasitic ring-shaped elements are improving antenna performance. In the prototype, various kinds of slots on the ground plane were investigated, and especially rectangular slots and irregular zigzag slots are applied to enhance bandwidth, gain, efficiency, and radiation directivity. The optimized size of the antenna is 29 × 24 × 1.5 mm3 by using the FR-4 substrate. The overall results illustrate that the antenna has a bandwidth of 8.7 GHz (2.80–11.50 GHz) for the reflection coefficient S11 < −10 dB with directional radiation pattern. The maximum gain of the proposed prototype is more than 5.7 dBi, and the average efficiency over the radiating bandwidth is 75%. Different design modifications are performed to attain the most favorable outcome of the proposed antenna. However, the prototype of the proposed antenna is designed and simulated in the 3D simulator CST Microwave Studio 2018 and then effectively fabricated and measured. The investigation throughout the study of the numerical as well as experimental data explicit that the proposed antenna is appropriate for the Ultrawideband-based microwave-imaging fields.

PERANCANGAN ANTENA MIKROSTRIPRECTANGULAR

Jurnal Teknik ◽  
2018 ◽  
Vol 7 (1) ◽  
Author(s):  
Heru Abrianto
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Wireless Lan ◽  
Microstrip Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Area Network ◽  
Dual Polarization ◽  
Feeding Technique

Microstrip antenna which designed with dual feeding at 2.4 GHz and 5.8 GHz can meet WLAN (Wireless Local Area Network) application.Antenna fabrication use PCB FR4 double layer with thickness 1.6 mm and dielectric constant value 4.4. The length of patch antenna according to calculation 28.63 mm, but to get needed parameter length of patch should be optimized to 53 mm. After examination, this antenna has VSWR 1.212 at 2.42 GHz and 1.502 at 5.8 GHz, RL -13.94 dB at 2.42 GHz and -20.357 dB at 5.8 GHz, gain of antenna 6.16 dB at 2.42 GHz and 6.91 dB at 5.8 GHz, the radiation pattern is bidirectional. Keywords : microstrip antenna, wireless LAN, dual polarization, single feeding technique

A compact omnidirectional to directional frequency reconfigurable antenna for wireless sensor network applications

2021 ◽  
pp. 1-12
Author(s):  
Melvin Chamakalayil Jose ◽  
Radha Sankararajan ◽  
Balakrishnapillai Suseela Sreeja ◽  
Mohammed Gulam Nabi Alsath ◽  
Pratap Kumar
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Radiation Pattern ◽  
Antenna System ◽  
Wireless Sensor ◽  
Dual Band ◽  
Design Parameters ◽  
Pin Diodes ◽  
Band Frequency ◽  
Directional Radiation

Abstract In the proposed research paper, a novel compact, ultra-wideband electronically switchable dual-band omnidirectional to directional radiation pattern microstrip planar printed rectangular monopole antenna (PRMA) has been presented. The proposed antenna system has an optimum size of 0.26 λ0 × 0.28 λ0. A combination of radiators, reflectors, and two symmetrical grounds does place on the same layer of the rectangular microstrip PRMA. The frequency agility and the radiation pattern from omnidirectional to directional are achieved using two SMD PIN diodes (SMP1340-04LF). The directional radiation patterns with 180° phase shifts are achieved at the C-band frequency spectrum. The parametric study of the proposed antenna system was performed for different design parameters, and the antenna characteristics were analyzed. An antenna prototype is fabricated using the printed circuit board etching method by using RMI UV laser etching and cutting tools. The measurements of the proposed antenna are conducted in an anechoic chamber to validate the simulations. There are three states of operations due to two SMD PIN diodes being used in switching circuits. In state-I, the proposed antenna radiates at 6.185 GHz (5.275–6.6 75 GHz) in the Ф = 270° direction with a gain of 2.1 dBi, whereas in state-II, it radiates at 5.715 GHz (5.05–6.8 GHz) in the Ф = 90° direction with a gain of 2.1 dBi. In state-III, the antenna exhibits the X-band frequency with center frequency at 9.93 GHz (8.845–10.49 GHz), and the omnidirectional pattern offers a gain of 4.1 dBi. The features of the proposed antenna are suitable for high-speed wireless sensor network communication in industries such as chemical reactors in oil and gas and pharmaceuticals. It is also well suited for IoT and 5G-sub-6-GHz applications.

scholarly journals Smart optical cross dipole nanoantenna with multibeam pattern

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Seyyed Mohammad Mehdi Moshiri ◽  
Najmeh Nozhat
Keyword(s):  
Radiation Pattern ◽  
Chemical Potential ◽  
Monolayer Graphene ◽  
Absorption Characteristic ◽  
Radiation Beam ◽  
Directional Radiation ◽  
Chemical Potentials ◽  
Different Types ◽  
Absorption Power ◽  
Maximum Directivity

AbstractIn this paper, an optical smart multibeam cross dipole nano-antenna has been proposed by combining the absorption characteristic of graphene and applying different arrangements of directors. By introducing a cross dipole nano-antenna with two V-shaped coupled elements, the maximum directivity of 8.79 dBi has been obtained for unidirectional radiation pattern. Also, by applying various arrangements of circular sectors as director, different types of radiation pattern such as bi- and quad-directional have been attained with directivities of 8.63 and 8.42 dBi, respectively, at the wavelength of 1550 nm. The maximum absorption power of graphene can be tuned by choosing an appropriate chemical potential. Therefore, the radiation beam of the proposed multibeam cross dipole nano-antenna has been controlled dynamically by applying a monolayer graphene. By choosing a suitable chemical potential of graphene for each arm of the suggested cross dipole nano-antenna without the director, the unidirectional radiation pattern shifts ± 13° at the wavelength of 1550 nm. Also, for the multibeam nano-antenna with different arrangements of directors, the bi- and quad-directional radiation patterns have been smartly modified to uni- and bi-directional ones with the directivities of 10.1 and 9.54 dBi, respectively. It is because of the graphene performance as an absorptive or transparent element for different chemical potentials. This feature helps us to create a multipath wireless link with the capability to control the accessibility of each receiver.

Study of a dual-band packaged patch antenna on a PC card for 5-6 GHz wireless LAN applications

2003 ◽  
Vol 37 (6) ◽  
pp. 423-428 ◽  
Author(s):  
V. K. Kunda ◽  
M. Ali ◽  
Huan Sheng-Hwang ◽  
T. Sittironnarit
Keyword(s):  
Patch Antenna ◽  
Wireless Lan ◽  
Dual Band

scholarly journals A dual-frequency patch antenna with monopolar radiation pattern

2010 ◽  
Author(s):  
Francisco Javier Herraiz-Martínez ◽  
Eduardo Ugarte-Muñoz ◽  
Vicente González-Posadas ◽  
Daniel Segovia-Vargas
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Dual Frequency

A compact dual-band D-CRLH-based antenna with self-isolation functionality

2021 ◽  
pp. 1-10
Author(s):  
Mahmoud A. Abdalla ◽  
Mohamed El Atrash ◽  
Ahmed A. Abdel Aziz ◽  
Mohamed I. Abdelnaser
Keyword(s):  
Patch Antenna ◽  
Planar Waveguide ◽  
Dual Band ◽  
Resonant Frequencies ◽  
Left Handed ◽  
Directional Radiation ◽  
Full Wave ◽  
Compact Size ◽  
Filtering Function ◽  
Filter Structures

Abstract This paper presents a compact dual-band filtering antenna without extra employing of filter structures. The antenna is designed using a planar dual-composite right/left-handed (D-CRLH) transmission line unit cell, where the filtering function is achieved through current cancellation between the D-CRLH resonators. The antenna is designed to function at 3.0 and 5.1 GHz, which can serve different WLAN applications. The antenna is a co-planar waveguide fed with a very compact size of only 30 × 16 mm2. Compared to the conventional patch antenna, the antenna size is only 17% at 3.0 GHz and 31% at 5.1 GHz. Despite the small size, the antenna preserves a good omni-directional radiation pattern at the two resonant frequencies with a measured realized gain of 2 and 2.7 dB, respectively. At the stopband in-between the two resonant bands, the reflection coefficient is almost 0 dB at 4.25 GHz and complete non-radiation is proved with a −11 dB measured realized gain. The different antenna filtering functions are verified by full-wave simulation and measurements.

Sign in / Sign up

Export Citation Format

Share Document