Study of Radio Link Losses in Different Mediums and Receiving Stations

Author(s):  
Md. Nihal Al Rafi ◽  
Mohammad Akib Javed Mojumder ◽  
Sheikh Shah Newaz ◽  
Riasat Khan
Keyword(s):  
Author(s):  
Francesco Montomoli ◽  
Giovanni Macelloni ◽  
Luca Facheris ◽  
Fabrizio Cuccoli ◽  
Samuele Del Bianco ◽  
...  

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4796
Author(s):  
Adriana Lipovac ◽  
Vlatko Lipovac ◽  
Borivoj Modlic

This work is motivated by growing evidence that the standard Cyclic Prefix (CP) length, adopted in the Long Term Evolution (LTE) physical layer (PHY) specifications, is oversized in propagation environments ranging from indoor to typical urban. Although this ostensibly seems to be addressed by 5G New Radio (NR) numerology, its scalable CP length reduction is proportionally tracked by the OFDM symbol length, which preserves the relative CP overhead of LTE. Furthermore, some simple means to optimize fixed or introduce adaptive CP length arose from either simulations or models taking into account only the bit-oriented PHY transmission performance. On the contrary, in the novel crosslayer analytical model proposed here, the closed-form expression for the optimal CP length is derived such as to minimize the effective average codeblock length, by also considering the error recovery retransmissions through the layers above PHY—the Medium Access Control (MAC) and the Radio Link Control (RLC), in particular. It turns out that, for given protective coding, the optimal CP length is determined by the appropriate rms delay spread of the channel power delay profile part remaining outside the CP span. The optimal CP length values are found to be significantly lower than the corresponding industry-standard ones, which unveils the potential for improving the net throughput.


Author(s):  
E. Cottatellucci ◽  
M. Tosolini ◽  
G. Tosti

2015 ◽  
Vol 8 (2) ◽  
pp. 179-184 ◽  
Author(s):  
Valeria Nocella ◽  
Luca Pelliccia ◽  
Paola Farinelli ◽  
Roberto Sorrentino ◽  
Mario Costa ◽  
...  

A robust and tuneless micromachined waveguide diplexer operating in the frequency range 71–86 GHz is here presented. The diplexer is based on multiple coupled cavities and it is manufactured using micromachining technology on two staked silicon layers. The diplexer consists of two filters combined to a common waveguide port via an E-plane T-junction. The two eight-order band-pass filters are centered at 73.5 and 83.5 GHz. The fractional bandwidths for two bands are 8.8 and 7.8% at higher- and lower-band, respectively. The measured insertion loss is below 0.7 dB for both the filters and the diplexer isolation is better than 55 dB, as required. The proposed technology allows for a very compact device (<20 × 20 × 1.5 mm) and the first prototypes were proved to be very robust to manufacturing tolerances and environmental tests, thus leading to an excellent tuneless manufacturing yield in future production. The diplexer will be employed in next generation terrestrial radio-link communications front-ends.


2016 ◽  
Vol 8 (5) ◽  
pp. 380 ◽  
Author(s):  
Rosa Alsina-Pagès ◽  
Marcos Hervás ◽  
Ferran Orga ◽  
Joan Pijoan ◽  
David Badia ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document