U.S. and Brazil to set up radio link via space terminal and satellite

1962 ◽  
Vol 81 (9) ◽  
pp. 758-759
Keyword(s):  
Radio Link ◽  
Set Up

Experiences with the DGPS-based Tramway Location System in Mannheim

1998 ◽  
Vol 51 (3) ◽  
pp. 336-344
Author(s):  
Dietmar Vogel
Keyword(s):  
Public Transport ◽  
Urban Areas ◽  
Information Service ◽  
Dead Reckoning ◽  
Reference Points ◽  
Radio Link ◽  
Location System ◽  
Control Centre ◽  
Vehicle Positioning ◽  
Set Up

Because of increasing traffic in urban areas, public transport has to become more attractive and efficient by introducing computer-aided dynamic passenger information and on-line vehicle location. The tram location pilot system described makes vehicle scheduling and control systems independent of expensive location infrastructure (e.g. beacons). It uses on-board autonomous DGPS positioning with dead reckoning and a radio link to the control centre. The evaluation of the measured vehicle positions clearly demonstrates that operational accuracy requirements for public transport applications are met. The whole Tramway Location System (TLS) is structured into the 3 segments: on-board equipment, components of the operation centre and roadside equipment. The trial set-up for dynamic real-time measurements of the positioning accuracy is described, and the results of the evaluation of more than 7300 position fixes at 15 geodetically measured reference points along the tramway are presented. The conclusions indicate that, during runs in city environments, DGPS combined with dead reckoning achieves vehicle positioning precise enough to enable a reliable, improved and up-to-date passenger information service at the stops.

scholarly journals Microwave Attenuation and Prediction of Rain Outage for Wireless Networks in Pakistan's Tropical Region

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Uzma Siddique ◽  
Laeeq Ahmad ◽  
Gulistan Raja
Keyword(s):  
Wireless Networks ◽  
Research Work ◽  
Rainfall Rate ◽  
Tropical Region ◽  
Radio Link ◽  
Tropical Regions ◽  
Microwave Attenuation ◽  
Link Performance ◽  
Communication Links ◽  
Set Up

The microwave attenuation due to rainfall in tropical regions has not been very widely studied yet. In Pakistan's tropical environment, line-of-sight microwave communication links were set up and have been operated for several years to study the microwave attenuation characteristics due to tropical rainfall. In this paper the experimental results are presented, including the cumulative distributions of microwave attenuation and the relationship between specific attenuation and rainfall rate. In addition, a rain outage prediction model is proposed which not only predicts microwave radio link performance but will also be useful in calculating the link degradations due to interference issues. The main focus of this research work has been done keeping in mind the wireless networks of Pakistan. The results show that the rainfall rate, the microwave propagation characteristics, and outage predictions in Pakistan differ from the International Radio Consultative Committee predictions and ITU recommendation P530.7/8, respectively.

The Effects of Drying Techniques on Clay-Rich Soil Texture

1974 ◽  
Vol 32 ◽  
pp. 466-467
Author(s):  
T. G. Naymik
Keyword(s):  
Critical Point ◽  
Liquid Nitrogen ◽  
Liquid Nitrogen Temperature ◽  
Drying Methods ◽  
Air Drying ◽  
Freeze Dried ◽  
Critical Point Drying ◽  
Set Up ◽  
The Relationship ◽  
Quartz Grains

Three techniques were incorporated for drying clay-rich specimens: air-drying, freeze-drying and critical point drying. In air-drying, the specimens were set out for several days to dry or were placed in an oven (80°F) for several hours. The freeze-dried specimens were frozen by immersion in liquid nitrogen or in isopentane at near liquid nitrogen temperature and then were immediately placed in the freeze-dry vacuum chamber. The critical point specimens were molded in agar immediately after sampling. When the agar had set up the dehydration series, water-alcohol-amyl acetate-CO2 was carried out. The objectives were to compare the fabric plasmas (clays and precipitates), fabricskeletons (quartz grains) and the relationship between them for each drying technique. The three drying methods are not only applicable to the study of treated soils, but can be incorporated into all SEM clay soil studies.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

Eels Under Standing Wave Conditions

1982 ◽  
Vol 40 ◽  
pp. 492-495
Author(s):  
O.L. Krivanek ◽  
J. TaftØ
Keyword(s):  
Standing Wave ◽  
Wave Conditions ◽  
Set Up ◽  
A Site ◽  
Complex Crystal

It is well known that a standing electron wavefield can be set up in a crystal such that its intensity peaks at the atomic sites or between the sites or in the case of more complex crystal, at one or another type of a site. The effect is usually referred to as channelling but this term is not entirely appropriate; by analogy with the more established particle channelling, electrons would have to be described as channelling either through the channels or through the channel walls, depending on the diffraction conditions.

Low-Loss Images in a Stem/Tem Microscope

1976 ◽  
Vol 34 ◽  
pp. 496-497 ◽  
Author(s):  
David C. Joy ◽  
Dennis M. Maher
Keyword(s):  
High Resolution ◽  
Surface Topography ◽  
Beam Direction ◽  
Low Loss ◽  
Specimen Holder ◽  
Glancing Angle ◽  
High Resolution Images ◽  
Set Up ◽  
Conventional Manner ◽  
Objective Type

High-resolution images of the surface topography of solid specimens can be obtained using the low-loss technique of Wells. If the specimen is placed inside a lens of the condenser/objective type, then it has been shown that the lens itself can be used to collect and filter the low-loss electrons. Since the probeforming lenses in TEM instruments fitted with scanning attachments are of this type, low-loss imaging should be possible.High-resolution, low-loss images have been obtained in a JEOL JEM 100B fitted with a scanning attachment and a thermal, fieldemission gun. No modifications were made to the instrument, but a wedge-shaped, specimen holder was made to fit the side-entry, goniometer stage. Thus the specimen is oriented initially at a glancing angle of about 30° to the beam direction. The instrument is set up in the conventional manner for STEM operation with all the lenses, including the projector, excited.

UHV-TEM studies of laser-induced damage

1991 ◽  
Vol 49 ◽  
pp. 632-633
Author(s):  
T.S. Savage ◽  
R. Ai ◽  
D. Dunn ◽  
L.D. Marks
Keyword(s):  
Surface Science ◽  
Rapid Heating ◽  
Local Heating ◽  
Routine Practice ◽  
Transmission Electron ◽  
Northwestern University ◽  
Laser Induced Damage ◽  
Set Up ◽  
Focusing Lens ◽  
Diffusion Of Impurities

The use of lasers for surface annealing, heating and/or damage has become a routine practice in the study of materials. Lasers have been closely looked at as an annealing technique for silicon and other semiconductors. They allow for local heating from a beam which can be focused and tuned to different wavelengths for specific tasks. Pulsed dye lasers allow for short, quick bursts which can allow the sample to be rapidly heated and quenched. This short, rapid heating period may be important for cases where diffusion of impurities or dopants may not be desirable.At Northwestern University, a Candela SLL - 250 pulsed dye laser, with a maximum power of 1 Joule/pulse over 350 - 400 nanoseconds, has been set up in conjunction with a Hitachi UHV-H9000 transmission electron microscope. The laser beam is introduced into the surface science chamber through a series of mirrors, a focusing lens and a six inch quartz window.

A simple way for producing holographic filters suitable for image improvement

1978 ◽  
Vol 36 (1) ◽  
pp. 226-227
Author(s):  
K.-H. Herrmann ◽  
E. Reuber ◽  
P. Schiske
Keyword(s):  
Transfer Functions ◽  
Diffraction Order ◽  
Lateral Position ◽  
Simple Method ◽  
Spatial Frequencies ◽  
Resolution Electron ◽  
Wiener Filters ◽  
Image Improvement ◽  
Optical Reconstruction ◽  
Set Up

Aposteriori deblurring of high resolution electron micrographs of weak phase objects can be performed by holographic filters [1,2] which are arranged in the Fourier domain of a light-optical reconstruction set-up. According to the diffraction efficiency and the lateral position of the grating structure, the filters permit adjustment of the amplitudes and phases of the spatial frequencies in the image which is obtained in the first diffraction order.In the case of bright field imaging with axial illumination, the Contrast Transfer Functions (CTF) are oscillating, but real. For different imageforming conditions and several signal-to-noise ratios an extensive set of Wiener-filters should be available. A simple method of producing such filters by only photographic and mechanical means will be described here.A transparent master grating with 6.25 lines/mm and 160 mm diameter was produced by a high precision computer plotter. It is photographed through a rotating mask, plotted by a standard plotter.

3-D optical transfer in excitation field synthesis microscopes

1995 ◽  
Vol 53 ◽  
pp. 64-65
Author(s):  
Vijay Krishnamurthi ◽  
Brent Bailey ◽  
Frederick Lanni
Keyword(s):  
Standing Wave ◽  
Spatial Information ◽  
3D Structure ◽  
Complete Recovery ◽  
Weighting Factor ◽  
Optical Transfer Function ◽  
Excitation Field ◽  
Optical Transfer ◽  
Set Up ◽  
Focus Plane

Excitation field synthesis (EFS) refers to the use of an interference optical system in a direct-imaging microscope to improve 3D resolution by axially-selective excitation of fluorescence within a specimen. The excitation field can be thought of as a weighting factor for the point-spread function (PSF) of the microscope, so that the optical transfer function (OTF) gets expanded by convolution with the Fourier transform of the field intensity. The simplest EFS system is the standing-wave fluorescence microscope, in which an axially-periodic excitation field is set up through the specimen by interference of a pair of collimated, coherent, s-polarized beams that enter the specimen from opposite sides at matching angles. In this case, spatial information about the object is recovered in the central OTF passband, plus two symmetric, axially-shifted sidebands. Gaps between these bands represent "lost" information about the 3D structure of the object. Because the sideband shift is equal to the spatial frequency of the standing-wave (SW) field, more complete recovery of information is possible by superposition of fields having different periods. When all of the fields have an antinode at a common plane (set to be coincident with the in-focus plane), the "synthesized" field is peaked in a narrow infocus zone.

Convergent Beam Electron Diffraction Zone Axis Pattern Map of Zirconium

1990 ◽  
Vol 48 (2) ◽  
pp. 496-497
Author(s):  
E. Silva ◽  
R. Scozia
Keyword(s):  
Electron Diffraction ◽  
Convergent Beam Electron Diffraction ◽  
Zone Axis ◽  
Pole Piece ◽  
Small Particles ◽  
Present Communication ◽  
Beam Electron ◽  
Zero Layer ◽  
Set Up ◽  
Convergent Beam

The purpose in obtaining zone axis pattern map (zap map) from a given material is to provide a quick and reliable tool to identify cristaline phases, and crystallographic directions, even in small particles. Bend contours patterns and Kossel lines patterns maps from Zr single crystal in the [0001] direction have been presented previously. In the present communication convergent beam electron diffraction (CBED) zap map of Zr will be shown. CBED patterns were obtained using a Philips microscope model EM300, which was set up to carry out this technique. Convergent objective upper pole piece for STEM and some electronic modifications in the lens circuits were required, furthermore the microscope was carefully cleaned and it was operated at a vacuum eminently good.CBED patterns in the Zr zap map consist of zero layer disks, showing fine details within them which correspond to intersecting set of higher order Laue zone (HOLZ) deficiency lines.

Sign in / Sign up

Export Citation Format

Share Document