Long-Term Quality Observation in Large-Scale Production of Top-Seeded Melt Growth YBCO Bulks

2017 ◽  
Vol 27 (4) ◽  
pp. 1-4 ◽  
Author(s):  
Tomas Hlasek ◽  
Vladimir Plechacek
2021 ◽  
Vol 2115 (1) ◽  
pp. 012026
Author(s):  
Sonam Solanki ◽  
Gunendra Mahore

Abstract In the current process of producing vermicompost on a large-scale, the main challenge is to keep the worms alive. This is achieved by maintaining temperature and moisture in their living medium. It is a difficult task to maintain these parameters throughout the process. Currently, this is achieved by building infrastructure but this method requires a large initial investment and long-run maintenance. Also, these methods are limited to small-scale production. For large-scale production, a unit is developed which utilises natural airflow with water and automation. The main aim of this unit is to provide favourable conditions to worms in large-scale production with very low investment and minimum maintenance in long term. The key innovation of this research is that the technology used in the unit should be practical and easy to adopt by small farmers. For long-term maintenance of the technology lesser number of parts are used.


Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1051
Author(s):  
Eduardo Martínez-Molina ◽  
Carlos Chocarro-Wrona ◽  
Daniel Martínez-Moreno ◽  
Juan A. Marchal ◽  
Houria Boulaiz

Lentiviral vectors (LVs) have gained value over recent years as gene carriers in gene therapy. These viral vectors are safer than what was previously being used for gene transfer and are capable of infecting both dividing and nondividing cells with a long-term expression. This characteristic makes LVs ideal for clinical research, as has been demonstrated with the approval of lentivirus-based gene therapies from the Food and Drug Administration and the European Agency for Medicine. A large number of functional lentiviral particles are required for clinical trials, and large-scale production has been challenging. Therefore, efforts are focused on solving the drawbacks associated with the production and purification of LVsunder current good manufacturing practice. In recent years, we have witnessed the development and optimization of new protocols, packaging cell lines, and culture devices that are very close to reaching the target production level. Here, we review the most recent, efficient, and promising methods for the clinical-scale production ofLVs.


2008 ◽  
Vol 3 (2) ◽  
pp. 1934578X0800300 ◽  
Author(s):  
Zoubida Charrouf ◽  
Dominique Guillaume

For years, in southwestern Morocco, the decline of the argan forest has been accompanied by the concomitant desert encroachment. Preservation of this forest by increasing the economic value of argan tree was proposed twenty years ago, but successful large scale production of certified, high quality argan oil, an edible oil introduced as a functional food, has only been recently achieved. Argan oil is now marketed in most developed countries, despite its elevated price, and protection of the argan forest is now seriously being considered. The aim of this work is to present the recent progress made in argan oil production, the ways explored to commercialize the oil extraction by-products, and recent attempts to use other argan tree parts as part of a long term aim to preserve the argan forest.


2018 ◽  
Vol 13 (3) ◽  
pp. 39-45
Author(s):  
Раис Минниханов ◽  
Rais Minnihanov ◽  
Харрис Мусин ◽  
Kharris Musin ◽  
Нурсиль Гибадуллин ◽  
...  

The research methodology is based on generally accepted silvicultural and taxation techniques, methods of observation, and the method of test plots. The objects of research were the forests of the Republic of Tatarstan. Forests were created on an area of 17 553 hectares with a clear cutting area of 9 190 hectares for the years 1962-2001 in the forest fund of the GKU “Sabinskoe Forestry”. A part of forest cultures was created under the canopy of soft-leaved stands, in which non-continuous logging was carried out, but they did not have a sufficient amount of conifer undergrowth. The number of self-seeding per 1 m2 of mineralized area with the disc soil mineralization of KLB-1.7 on average is 1.4 times more than in the control variant. The bulk of self-seeding settles in the middle of the prepared lanes and grounds. In 1990, the number of self-seeding at the center of the bands averaged 81%, and at the edges - 19%, with fluctuations in some areas from 51 to 85%. In the next 2 years, the number of self seeding at the center of the lanes decreased on average by 65%, at the edges to 97%. Consequently, in high-grade crops of spruce, one cannot count on the accumulation of self-seeding after sampling either every 4th or every 8th rows of crops and soil mineralization even with good seed yield. It is necessary to improve the method of cutting and soil preparation. The thinning of plantations in the adjacent rows at the same time as felling could be effective, but they were not considered in further studies, because clear felling showed its futility. Conducted long-term large-scale production experiments demonstrate the possibilities of transferring artificial forest ecosystems to the path of natural development by the system of complex logging.


1971 ◽  
Vol 25 (01) ◽  
pp. 105-113 ◽  
Author(s):  
K Bergström ◽  
Ann O. Tse ◽  
A. J Johnson

SummaryA method is described for laboratory, pilot or large-scale production of intermediatepurity human plasminogen soluble at neutral pH, with a specific proteolytic activity of approximately 12.5 CTA units/mg protein. Batches of 100-200 g can be readily produced from Fraction III paste from outdated or fresh-frozen plasma. Since this plasminogen is stable on long-term storage, and low in spontaneous plasmin activity, it is especially useful as an assay reagent (substrate) and as starting material for the preparation of high-purity plasminogen.


1954 ◽  
Vol 52 (1) ◽  
pp. 60-66 ◽  
Author(s):  
H. M. Bruce

1. The production of weaned young from pairs or groups of three, four and five mice, each containing one male, has been compared.2. For long-term large-scale production, small breeding groups of one male with two females are proposed.I should like to thank Dr A. S. Parkes, F.R.S., for much helpful criticism, and Dr Walter Perry for the statistical tests.


2020 ◽  
Vol 14 (5) ◽  
pp. 744-756
Author(s):  
Stanisław Strzelczak ◽  
Rong Kang ◽  
Fernando Castaño ◽  
◽  
◽  
...  

Exponential technologies, if blended with advantageous conceptual setups, enable innovative developments for Internet-based production ecosystems. The focus of this study is on developing a support mechanism for homeostatic and evolutionary abilities in large-scale production environments. Starting from a reflection on the state-of-the-art, a suitable framework was developed for the conceptualization of Internet-based production ecosystems. Based on augmented context awareness and eco-systemic intelligence, homeostatic and adaptive abilities were designed, and used along with the operational controls to maintain the homeostasis of loads, workflows, and variability, and facilitate the long-term adaptation of the actors. The latter may comprise self-made adaptation of human and digital actors, as well as externally supported modification of functions operated by cyber-agents. The advantage of the proposed solutions is twofold: firstly, stakeholders can improve their performance and adaptability; and secondly, they can also benefit from non-selfish behaviors.


1990 ◽  
Vol 7 (4) ◽  
pp. 257-263
Author(s):  
P. WersÄll ◽  
G. Masucci ◽  
P. Pihlstedt ◽  
H. Wigzel ◽  
H. Mellstedt

1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.


Sign in / Sign up

Export Citation Format

Share Document