INVESTMENTS AS A DRIVER OF GROWTH IN THE AGRICULTURAL INDUSTRY (ON THE EXAMPLE OF THE REPUBLIC OF TATARSTAN)

In economically developed countries of the world, agricultural industries are actively supported by the government through the implementation of various kinds of programs, which is explained by the high social significance of the industry. Due to the low profitability of the industry, the debt burden of most enterprises, as well as the high wear and tear of fixed assets, the development of the agricultural industry is possible only if it is integrated into the overall system of economic growth. In order to achieve this condition, the government of the Republic of Tatarstan is actively improving the investment climate in this area of the economy by implementing measures such as: - subsidizing the renewal of fixed assets of enterprises (at least 50% of acquisitions are compensated by the government of the Republic of Tatarstan through various programs); - integration of modern technical programs that allow you to control and analyze each stage of production by an enterprise (Agrosignal, Teleagronom, Dayy Comp, etc.); - the launch of new production departments of enterprises (for example, an elevator in the city of Zelenodolsk), as well as the modernization of current production facilities. The above measures, carried out by the government of Tatarstan, lead to the following improvements: 1) the debt load of enterprises is reduced; 2) the productivity of the activity increases; 3) cost savings occur, which, in turn, increases the profitability of production. In addition, these changes have a positive impact on the following important components of the development of the agrarian sector of the economy: - social: a) creating jobs and attracting young personnel, creating competitive conditions for employment; b) ensuring food autonomy of the state; - financial: a) attracting private investors to the industry; b) replenishment of the state budget (through taxation) using one of the main sources of taxation for the budget - income tax.

GAS DISTRIBUTION PHASES HYDRAULIC CONTROLLED INTERNAL COMBUSTION ENGINE VALVES

The efficiency of an agricultural car or tractor depends on the characteristics of the engine determined by the gas distribution mechanism (GRM). Traditional timing with fixed valve timing does not provide high-quality gas exchange at all engine operating modes. The aim of the work is to improve the characteristics of the engine by using the hydraulic drive of the timing valves. The drive allows you to turn off individual valves, set the moments of their opening and closing in an arbitrary way, provide several triggering of the internal combustion engine valves during the operating cycle. The drive is controlled by an electronic control unit (ECU). The advantage of the drive is its ease of integration into the internal combustion engine. The hydraulic drive ensures that the timing valves are lifted to a height of about 14 mm. The law of displacement of the valve, revealed experimentally, is close to trapezoidal. The use of a hydraulic valve drive has a positive effect on the "time-section" factor in the area of low and medium crankshaft rotational speeds. The increment of the factor "time-section" is due to the significant speeds of opening and closing the valves. Due to the peculiarities of the kinematic characteristics of the movement of the valves when using a hydraulic drive for their movement, the use of serial phases of gas distribution of the engine is impractical. Numerical modeling of the operation of the internal combustion engine determined the regularity of the change in valve timing from the high-speed operating mode of the engine. Optimization criterion is the achievement of maximum engine power. When choosing the valve timing, the possibility of meeting the intake and exhaust valves with the engine piston was excluded. The use of optimal phases leads to an increase in power up to 4.5% at a low crankshaft speed. With an increase in the speed mode, the increase in power decreases, and with a high frequency of rotation of the crankshaft, its slight decrease (1.4%) is observed. An increase in torque, up to a power utilization factor of 0.9, and its subsequent decrease, allow stabilizing the vehicle speed on a road with variable resistance. An increase in the working pressure in the hydraulic drive of the valves makes it possible to intensify gas exchange even at a high speed of rotation of the crankshaft

ON MEASURES OF STATE SUPPORT AND REGULATION OF AIC

For the second decade, the agro-industrial complex has been receiving significant amounts of state support. At the same time, the issue of its effectiveness is becoming more and more urgent. In various sources, you can find a variety of approaches to assessing the effectiveness of budgetary funds allocated for the development of agriculture. The fact of state support in itself does not guarantee a return in the form of an increase in gross output, attraction of investments in the industry, an increase in wages in the countryside, an increase in tax revenues from enterprises in the industry. The methods of state support must adapt to modern challenges. They should stimulate recipients not for maximum development and subsequent cessation of activities, but for stable and long-term activities. This fine line usually prevents a sharp increase in the effectiveness of state support for the agro-industrial complex. The result of this study is an assessment of the rationality and effectiveness of state support for agriculture in the Chuvash Republic. The existing measures of state support in the Chuvash Republic properly support the development of the agricultural sector: investors have shown interest, fixed assets are being updated, labor productivity and production volumes are growing. But the current system does not quite cope with staffing problems in the countryside. The index of the physical volume of agricultural production, which amounted to 126.4% over the past 7 years, is far from a breakthrough rate. A significant increase in production volumes cannot be achieved with a reduction in the number of employees. Using the correlation-regression method, it was revealed that the growth of the level of wages in the countryside was largely influenced by the labor market laws, and not by state support measures. What is needed is motivating rather than compensatory measures on the part of the state, which will ensure the outstripping growth of wages in agriculture

TECHNOLOGY AND EQUIPMENT FOR PROCESSING ACTIVATED AGRICULTURAL PLANT WASTE INTO BIOETHANOL

The article is devoted to the development of technology and equipment for the production of bioethanol from agricultural plant waste, activated by the steam explosion method. The value and novelty of research lies in obtaining new data on the effective acidic and enzymatic hydrolysis of activated raw materials, and developing a technology for the conversion of plant raw materials into bioethanol. The studies were carried out on the basis of the Department of Wood Materials Processing of Kazan National Research Technological University (Republic of Tatarstan, Kazan). A pilot plant for the production of bioethanol and the principle of its operation are presented. Pine wood waste and wheat straw (collected in Kukmor region of the Republic of Tatarstan in the period August-September 2021) were used as raw materials. Steam-explosive activation of raw materials was carried out at temperatures of 165 ⁰C and 210 ⁰C for 5 minutes. Acid hydrolysis parameters: H2SO4 concentration - 0.5% and 1.5%, hydromodule 1:15, hydrolysis temperature - 187⁰C, hydrolysis duration - 5 hours. Enzymatic hydrolysis parameters: preparation - Cellulox-A (OOO PO Sibbiopharm, Russia) - 6 and 12 g/kg of raw material, hydrolysis temperature - 45 ⁰C, substrate pH 4.7 (acetate buffer), raw material concentration in the substrate 33 g/l, the duration of hydrolysis is 72 h. Alcoholic fermentation of hydrolysates was carried out at 32-34⁰C using Saccharomyces cerevisiae yeast, fermentation duration 7 h, yeast concentration 25 g/l. The bioethanol yield in % of reducing substances was recalculated after determining the mass yield. It is concluded that the vapor-explosive activation of pine wood at a temperature of 210 ºC makes it possible to obtain by acid hydrolysis and anaerobic fermentation of reducing substances up to 0.26 kg (0.33 l) of ethanol from 1 kg of activated raw materials, and activation of wheat straw at the same temperature allows obtaining up to 0.172 kg (0.218 l) ethanol with 1 kg of activated straw

STRUCTURE OF CEREAL-LEGUME HERBALS WITH DIFFERENT METHODS OF SOWING AND IRRIGATION IN ARID CONDITIONS OF THE LOWER VOLGA

In recent years, livestock farms in the Astrakhan region have mainly used grasses from natural hayfields and pastures for fodder. But, due to the sharp aridization of the climate, and, as a consequence, the more frequent droughts, as well as the unregulated growth of the number of animals on farms, the reserves of natural herbage are often insufficient. Therefore, the region began to increase the area of sown hayfields for irrigation. The aim of the work is to study the effect of various irrigation methods on the productivity of cereal-leguminous mixtures with multi-cut use in the conditions of light chestnut soils of the Northern Caspian region. The studies were carried out in 2017-2020 in the Astrakhan region. All studied irrigation methods (sprinkler irrigation, drip irrigation with a belt laying depth of 0.0, 0.15, 0.25, 0.35 and 0.45 m, periodic flooding), with the exception of subsoil irrigation, with an ordinary method of sowing contributed to the development of both cereals and legumes. In these variants of the experiment, cereals occupied a significant part in the total herbage - from 40.0 to 61.0%. When using the spread sowing method, only in one variant, the share of cereal grasses was 54.0% (periodic flooding). In all others with this method of sowing, the amount of cereals in the total mass was insignificant, or they were completely absent. The widespread method of sowing was also the most productive in all the years of research. The maximum yield in the experiment was noted in all variants of the experiment in the third year of the life of grasses in 2019.The highest productivity with the spread method of sowing was noted in 2019 in the variants of the experiment with a belt laying depth of 0.25, 0.35 and 0.45 m and amounted to 98.1, 104.4 and 111.0 t/ha, respectively. In the variants with the row-sowing method, the yield was lower than with the wide-spread one. The highest yield with this method of sowing was also noted in 2019 in variants with subsurface drip irrigation with a belt laying depth of 0.35 and 0.45 m and amounted to 105.5 and 104.8 t/ha, respectively

OPTIMIZATION OF METHODS AND PARAMETERS OF PRE-START THERMAL PREPARATION OF THE ENGINE FOR STARTING DEPENDING ON THE AMBIENT TEMPERATURE

Due to the lack of a generally accepted methodology for calculating the starting processes of automotive diesel engines, today it is not possible to calculate their temperature parameters with a sufficient degree of accuracy during start-up, which determine the condition of a guaranteed start-up process. The main problem in applying theoretical calculations is that they take into account the compression ratio of the engine. But the compression ratio and the value of the actual pressure in the engine cylinders during the start-up are completely different indicators. The purpose of this work is to correct the generally accepted dependencies for determining the temperature parameters of a diesel engine by introducing a correction factor that takes into account the reduced pressure in the engine cylinders during start-up, as well as calculating the temperature parameters during start-up according to the proposed calculation method. The correction factor is determined experimentally and depends on the engine temperature. When applying the correction factor, it becomes possible to accurately calculate the temperature of the fuel-air mixture, which determines the possibility of a guaranteed start-up process and at the same time allows you to set the minimum necessary requirements for the means of thermal pre-start preparation. A group of graduate students and teachers (Izhevsk State Agricultural Academy and Kazan Agrarian University) conducted a number of practical studies on the basis of one of the leading agricultural enterprises of the Udmurt Republic JSC "Ilyich's Way". The MTZ-82 tractor was taken as the object of the study. The subject of the study was the launch of its D-243 engine at low temperatures in real operating conditions. The choice of this model of diesel engine is due to its wide application on tractors. The studies were carried out according to the approved test program, which consists in starting the D-243 engine of the MTZ-82 tractor at temperatures from - 30 ° C with an interval of 5 ° C to +5 ° C (engine temperature is equal to ambient temperature), as well as from +5 ° C to +90 ° C with an interval of 20 ° C (ambient temperature +20 ° C). Measurements were carried out to determine the amount of compression in the engine cylinders and the speed of rotation of the crankshaft at certain temperatures. The experiments were carried out using a starter charger that provides the full electric power of the diesel starter. As a result of the experimental work carried out, a change in the value of the correction coefficient from the engine temperature was established, and in accordance with the modified methodology of theoretical calculations, the values of the temperature of the fuel-air mixture at the end of the compression stroke of the diesel engine at start-up are given. It is established that the minimum required pre-start temperature of the diesel engine should be at least +5 ° C. Based on the results of the analysis of calculations, the directions of ensuring a guaranteed start of the diesel engine by simultaneously heating the coolant and engine oil are proposed. These requirements can be provided by a thermal storage system that does not require additional energy sources for its operation

ECOLOGICAL PLASTICITY AND STABILITY OF PROSPECTIVE PEA LINES

The studies were carried out in order to assess the parameters of the adaptability of promising pea samples in terms of yield to identify the best genotypes for the conditions of middle Volga region. The work was carried out in 2018-2020 in the central zone of Ulyanovsk region. The object of the research was 10 pea samples, the standard was Ukaz variety. According to the methods of S.A. Eberhart, W.A. Russell, V.V. Khangildina and S.P. Martynova determined the adaptability of breeding samples using the following indicators: coefficient of variation (V%), homeostaticity (Hom), breeding value (Sc), stability index (Sj2), linear coefficient regression (bi), point stability estimate (Hi). On average, over three years of research, the greatest increase in yield, compared to the standard, was noted for Ulyanovskiy yubileiny variety - 0.43 t/ha. The genotypes of Ulyanovskiy yubileiny, Viridis and line 657/14 with the smallest values of the coefficients of variation - 14.6, 22.4, 23.4%, respectively, are attributed to the most stable in terms of the coefficient of variation V. The most valuable in terms of plasticity and stability were the Ukaz variety (bi=1.15 and Sj2=0.02) and line 559/11 (1.14 and 0.00 respectively). Line 621/14 (bi=1.42 and Sj2=0.15) was recognized as an intensive variety with very low phenotypic stability and line 752/14 (1.29 and 0.11 respectively), with a reduced variety. Lines 215/11, 533/14, 657/14 were distinguished by very high phenotypic stability (bi=0,91…1,07, Sj2=0,00…0,03). The highest level of homeostaticity in combination with breeding value was observed in the promising pea cultivar Ulyanovskiy Yubileiny (Hom=15.33 and Sc=1.67) and line 215/11 (Hom=7.74 and Sc=1.22). According to the point assessment of Hi stability, significant advantages were revealed in Ulyanovskiy yubileiny variety (Hi =4.22) and line 215/11 (1.33). According to the sum of the ranks of the six parameters of adaptability, the leading positions were occupied by lines 533/14 (27), 215/11 (32) and promising varieties Ulyanovskiy yubileiny (32), Viridis (32). According to the test results, two samples in 2020 were submitted for state variety testing

CHANGE IN THE VITREUOSNESS GRAIN OF DURUM WHEAT IN THE BREEDING PROCESS IN THE MIDDLE VOLGA REGION

The vitreousness of grain is an important trait taken into account by the state standards of many countries when determining its quality class. When creating new cultivars, this trait is controlled at all stages of breeding. The article presents the results of studying the vitreousness of grain cultivars of Samara Research Institute of Agriculture, related to the 4 stages of breeding covering the periods - 1957-1990 (stage I), 2003-2004 (stage II), 2007-2008 (stage III), 2012-2018 (stage IV). The study was carried out on the experimental field of Samara Research Institute of Agriculture during 2012-2020. Experimental plots with an accounting area of 20.0 m2 were placed in randomized blocks. Vitreousness was determined by the percentage of vitreous grains on the endosperm section in refined grain samples taken in 3 field replicates. The evaluation of the data obtained was carried out on the basis of 2-factor, one-way dispersion and correlation analyzes, parameters of stability and responsiveness according to the methods of Kilchevsky, Khotyleva, Eberhart-Russell, Khangildin, Nettevich. The dispersion of grain vitreousness was determined by environmental conditions – 61.2%, genotype factors and genotype/environmental interactions – 9.3% and 19.0%, respectively. Progress in breeding relative to the first stage was observed at the 2nd and 4th stages and was absent at the 3rd stage. According to the absolute values of vitreousness (91.8-94.3%), 4 cultivars were distinguished - Bezenchukskaya zolotistaya, Bezenchukskaya krepost, Bezenchukskaya nivaand Bezenchukskaya 210, belonging to the 4th stage. Values close to these (89.2-89.6%) were noted in the varieties of the 2nd stage - Bezenchukskaya stepnaya and Pamyaty Chekhovicha. Successful breeding for the vitreousness of durum wheat grain is associated with an improvement in the parameters of the stability of the formation of a trait in a variety of environmental conditions. Reliable genotypic correlations of glassiness, grain yield and macaroni color show the effectiveness of simultaneous selection for these traits. The absence of significant correlations of grain vitreousness with vegetation parameters, and quality, suggests the possibility of obtaining the necessary recombinations in the selection process. Genotypic correlation coefficients show the possibility of breeding productive cultivars with a high vitreousness of grain and a varied combination of parameters of the growing season and grain quality. Cultivars of the 4th stage, Bezenchukskaya zolotistaya and Bezenchukskaya krepost, were proposed as a initial material in breeding for grain vitreousness

LIVESTOCK IN KAZAKHSTAN: DEVELOPMENT PROBLEMS

The research was carried out in order to highlight the main problems that impede the increase in the competitiveness of Kazakhstani animal husbandry. The indicators of productivity (milk yield, shearing of wool from one sheep, etc.), as well as aggregated data (production volumes, indices of the physical volume of gross production) were used as criteria for assessing the development of the industry. In Kazakhstan, the share of beef pedigree cattle in 2019 accounted for only 11.5% of the total cattle population. The average live weight of cattle was 336 kg, the average slaughter weight was 175 kg, which is 2 times lower than world standards, the average live weight of 1 bird was 2.2 kg. The republic has a weak base for the production of basic feed for the fattening contingent, due to which its supply with such feed is at the level of 57.8% of the scientifically grounded norm. The share of breeding stock of dairy cattle (as of January 1, 2018) is 2.8%, birds of all types - 12.3% of the total livestock, sheep - 14.8%. In modern conditions, in order to increase competitiveness, it is necessary to focus efforts on solving such problems as providing highly productive breeding cattle and poultry; improving the fodder base by expanding the crops of corn, soybeans, alfalfa, chickpea; strengthening of preventive work against especially dangerous animal diseases; adaptation of scientific developments in the field of genetics, selection and fodder production to the current economic conditions in animal husbandry; accelerating the transfer of animal husbandry to new technologies; implementation of international standards for product quality and management

STATISTICAL STUDY OF SPATIAL AND TEMPORAL DEVELOPMENT OF AGRICULTURE AT THE MESO-LEVEL

Significant transformations in the Russian economy in 1990-2000 negatively affected the development of agriculture. The number of workers in the industry has declined, and the production of some types of products has dropped to catastrophic levels. In this regard, we consider it timely and necessary to conduct a statistical study of the state of the industry at the meso-level and the factors that influence it. The aim of the research is to study the development of agriculture at the meso-level in the historical aspect based on statistical methods for assessing the current and forecasting future states. The object of research is Orenburg region and its municipalities, which is due to a number of reasons: the region occupies a stable leading position in the agriculture of Volga Federal District; the industry’s contribution to GRP is about 8%; municipalities of the region are in unequal conditions that affect the development of agriculture in the region. The development of crop production in Orenburg region in 1991-2019 characterized by an increase in sunflower production and a lateral trend in gross grain harvest, while the production of silage, annual and perennial grasses significantly decreased. The lack of a forage base against the background of low early maturity led to a significant reduction in the number of cattle - this negatively affected milk production in the region. Meat production managed to keep from falling only due to the growth of poultry population. The construction of regression models based on panel data covering 35 municipalities (period 2000-2019 and 5 variables) showed that three factors influence the volume of agricultural production - the availability of acreage, investment in fixed assets and the number of cattle. The constructed statistically significant regression model with fixed effects indicates a stable structure of producers and the presence of hidden factors. This determines the direction of further research, which consists in identifying latent variables that have a significant impact on the development of the region’s industry