A compact planar inverted-f antenna with a pbg-type ground plane for mobile communications

2003 ◽  
Vol 52 (3) ◽  
pp. 483-489 ◽  
Author(s):  
Zhengwei Du ◽  
Ke Gong ◽  
J.S. Fu ◽  
Baoxin Gao ◽  
Zhenghe Feng
Keyword(s):  
Mobile Communications ◽  
Ground Plane ◽  
Compact Planar

scholarly journals A COMPACT MICROSTRIP ANTENNA BASED ON H-FRACTAL GEOMETRY FOR MULTI- BAND OPERATION

2021 ◽  
Vol 25 (Special) ◽  
pp. 1-49-1-55
Author(s):  
Zainab S. Muqdad ◽  
◽  
Taha A. Elwi ◽  
Zaid A. Abdul Hassain ◽  
◽  
...  
Keyword(s):  
Mobile Communications ◽  
Fractal Geometry ◽  
Microstrip Antenna ◽  
Communication Systems ◽  
Ground Plane ◽  
Wireless Communication Systems ◽  
Total Size ◽  
Antenna Structure ◽  
Rectangular Patch ◽  
Resonance Frequencies

This paper presents a compact, tri-bands, rectangular patch antenna based on H-Tree fractal slots structure for modern wireless communication systems has been introduced. The antenna structure consists of a 70.70×56mm2 rectangular patch printed on 173×173×1.6mm3 FR4 substrate. H-Tree slots fractal geometry with the defective ground plane on the other side to enhance gain and bandwidth. The suggested antenna is fed by a 50 Ω microstrip line. The antenna shows three resonance frequencies: 0.784, 1.158, and 1.772 GHz. The suggested antenna offers a total size reduction of about 75 %. The designed antenna possesses fractional bandwidths of 3.976 %, 7 %, and 2.7866 % for the first, second, and third resonances, respectively. Finally, the proposed antenna is a candidate for Global System for Mobile communications (GSM).

A compact planar antenna with extended patch and truncated ground plane for ultra wide band application

2019 ◽  
Vol 62 (1) ◽  
pp. 200-209 ◽  
Author(s):  
Sudeep Baudha ◽  
Amartya Basak ◽  
Mayank Manocha ◽  
Manish V. Yadav
Keyword(s):  
Ground Plane ◽  
Wide Band ◽  
Ultra Wide Band ◽  
Planar Antenna ◽  
Compact Planar

scholarly journals Design of a Compact Tuning Fork-Shaped Notched Ultrawideband Antenna for Wireless Communication Application

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
M. N. Shakib ◽  
M. Moghavvemi ◽  
W. N. L. Mahadi
Keyword(s):  
Wireless Communication ◽  
Frequency Band ◽  
Return Loss ◽  
Tuning Fork ◽  
Ground Plane ◽  
Uwb Antenna ◽  
Feed Line ◽  
Compact Size ◽  
Uwb Communication ◽  
Compact Planar

A new compact planar notched ultrawideband (UWB) antenna is designed for wireless communication application. The proposed antenna has a compact size of0.182λ × 0.228λ × 0.018λwhereλis the wavelength of the lowest operating frequency. The antenna is comprised of rectangular radiating patch, ground plane, and an arc-shaped strip in between radiating patch and feed line. By introducing a new Tuning Fork-shaped notch in the radiating plane, a stopband is obtained. The antenna is tested and measured. The measured result indicated that fabricated antenna has achieved a wide bandwidth of 4.33–13.8 GHz (at −10 dB return loss) with a rejection frequency band of 5.28–6.97 GHz (WiMAX, WLAN, and C-band). The effects of the parameters of the antenna are discussed. The experiment results demonstrate that the proposed antenna can well meet the requirement for the UWB communication in spite of its compactness and small size.

scholarly journals Compact Hexagonal Monopole Antenna for Lower 5G Bands

2019 ◽  
Vol 9 (3) ◽  
pp. 4200-4202
Author(s):  
H. Alsaif
Keyword(s):  
Reflection Coefficient ◽  
Radiation Pattern ◽  
Ground Plane ◽  
Wireless Systems ◽  
Wide Band ◽  
Simulation Software ◽  
Planar Antenna ◽  
Total Size ◽  
Patch Geometry ◽  
Compact Planar

This paper presents a compact planar antenna with extreme wide band. The antenna is designed to cover the entire lower 5th generation operating bands ranging from 2.32GHz to more than 12GHz. This band also covers the IEEE 802.11 a/b/g/n/ac. The patch geometry has been simulated using an industrial standard simulation software called CST MWS. The monopole is miniaturized with a total size of 23x24x1.2mm3. The radiator and the ground plane are printed on a substrate of Rogers Duriod RT 5880 with relative permittivity of 2.2 and loss tangent of 0.00009. The simulated reflection coefficient and radiation pattern results are presented. S11 parameter for the designed antenna is less that -10dB over the operating band, with lowest value of -32.5dB at 2.85GHz. The radiation pattern is presented at the two orthogonal planes, elevation (E plane) and azimuth (H plane). Simulated results show that the antenna is appropriate of lower 5G bands application and several other wireless systems.

A Compact Planar Inverted-F Antenna for Octa-Band Operations of Smart Handsets

2013 ◽  
Vol 479-480 ◽  
pp. 436-441
Author(s):  
Simon C. Li ◽  
I Tseng Tang ◽  
Yu Lieh Shih ◽  
Hsu Yang Cheng ◽  
Wen Fan Chang
Keyword(s):  
Ground Plane ◽  
Ieee 802.11B ◽  
Quarter Wavelength ◽  
Plane Area ◽  
Compact Planar

This paper applies planar inverted-F antenna (PIFA) to design a smart handset antenna in accordance with octa-band operations, as GSM 850 (824-894 MHz), GSM 900 (880-960 MHz), GSM 1800/1900, DCS 1800 (1710-1880 MHz), PCS 1900 (1850-1990 MHz), UMTS (1920-2170 MHz), IEEE 802.11b WLAN (2400-2484 MHz) and LTE (700 MHz/2300 MHz/2600 MHz) band operations for S11-6 dB. The entire antenna is 75 × 22 × 5.8 mm3with one-quarter wavelength design of hub. With the inter-coupling between dual branch circuit radiation and multiple branch circuit radiation, the wideband for GSM 1800/1900, DCS, PCS, UMTS, IEEE 802.11b WLAN and LTE 700/2300/2600 is generated. When integrating with mobiles, the designed ground plane area is also taken into consideration. In this case, the ground plane area can be increased in accordance to the system motherboard.

Design of a Compact High Gain Microstrip Patch Antenna for Tri-Band 5 G Wireless Communication

Frequenz ◽  
2019 ◽  
Vol 73 (1-2) ◽  
pp. 45-52 ◽  
Author(s):  
Ahmed Abdelaziz ◽  
Ehab K. I. Hamad
Keyword(s):  
Wireless Communication ◽  
Mobile Communications ◽  
Patch Antenna ◽  
Ground Plane ◽  
High Gain ◽  
Microstrip Patch Antenna ◽  
International Telecommunication Union ◽  
Microstrip Patch ◽  
Low Profile ◽  
Tan Δ

Abstract In this paper, a Tri-band microstrip-line-fed low profile microstrip patch antenna is proposed for future multi-band 5 G wireless communication applications. The proposed antenna is printed on a compact Rogers RT5880 substrate of dimensions 20×16.5×0.508 mm3 with relative permittivity, εr of 2.2 and loss tangent, tan δ of 0.0009. To improve return loss and bandwidth of the proposed antenna, a partial ground plane technique is employed. The proposed antenna operates at 10, 28, and 38 GHz, three of the selected frequencies which are allocated by the International Telecommunication Union (ITU) for 5 G mobile communications. To reduce interference between the 5 G system and other systems in the band, a pair of T-shaped slots is etched in the radiating patch to reject unwanted frequency bands. The proposed design provides a gain of 5.67 dB at 10 GHz, 9.33 dB at 28 GHz and 9.57 dB at 38 GHz; the radiation pattern is mostly directional. The proposed antenna is designed and optimized using two commercial 3D full-wave software, viz. CST microwave studio and Ansoft HFSS. A prototype of the designed antenna that was fabricated and showed good agreement between the actual measurements of S11 & VSWR and the simulation results using both software.

scholarly journals A Novel Multiband Miniature Planar Inverted F Antenna Design for Bluetooth and WLAN Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
J. M. Jeevani W. Jayasinghe ◽  
Disala Uduwawala
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Ground Plane ◽  
Antenna Design ◽  
Algorithm Optimization ◽  
Genetic Algorithm Optimization ◽  
Shorting Pin ◽  
5 Ghz ◽  
Patch Geometry ◽  
Compact Planar

A novel compact planar inverted F antenna (PIFA) optimized using genetic algorithms for 2.4 GHz (Bluetooth) and 5 GHz (UNII-1, UNII-2, UNII-2 extended, and UNII-3) bands is presented. The patch with a shorting pin is on a20×7×0.762 mm3substrate, which is suspended in air 5 mm above a30×7 mm2ground plane. Genetic algorithm optimization (GAO) is used to optimize the patch geometry, feed position, and shorting pin position simultaneously. Simulations are carried out by using HFSS and a prototype antenna is fabricated to compare the measurements with the simulations. The antenna shows fractional impedance bandwidths of 4% and 21% and gains of 2.5 dB and 3.2 dB at lower and upper bands, respectively.

A compact single layer branch-line coupler for ultra-wideband (UWB) applications

2016 ◽  
Vol 9 (3) ◽  
pp. 505-508 ◽  
Author(s):  
Sangeetha Velan ◽  
Malathi Kanagasabai
Keyword(s):  
Power Output ◽  
Return Loss ◽  
Ground Plane ◽  
Single Layer ◽  
Ultra Wideband ◽  
Branch Line ◽  
Multi Stage ◽  
Band Ring ◽  
Uwb Applications ◽  
Compact Planar

This paper presents the design of a compact, planar, single layer, tri-section ultra-wideband (UWB) branch-line (BL) coupler. The prototype offers 10 dB return loss characteristics from 3.1 to 13.7 GHz. Over a major portion of the band, phase imbalance of ±10° is achieved. The method of deploying multi stage impedance feed has been used to achieve improved bandwidth. To enhance the power output through the coupled port throughout the operating band, ring shaped slots have been introduced in the ground plane beneath the series arms. The performance of the fabricated prototype has also been validated experimentally.

scholarly journals Planar Dual-Band Monopole Antenna with an Extended Ground Plane for WLAN Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Ayman S. Al-Zayed ◽  
V. A. Shameena
Keyword(s):  
Ground Plane ◽  
Equivalent Circuit Model ◽  
Monopole Antenna ◽  
Impedance Match ◽  
Dual Band ◽  
Parasitic Element ◽  
Rectangular Strip ◽  
Parametric Studies ◽  
Microstrip Feed ◽  
Compact Planar

A compact planar microstrip-fed monopole antenna designed for dual-band operation is proposed for WLAN applications. The antenna is composed of a rectangular strip monopole in addition to an inverted-L parasitic element that is connected to the truncated ground plane of the microstrip feed. Besides exciting an additional band of operation, the parasitic element also improves the bandwidth of the band excited by the strip monopole. Several simulated parametric studies are conducted to investigate the effects of each geometrical parameter on the behavior of the antenna. Experimental and simulation results demonstrate that the proposed antenna covers the 2.4 and 5.8 GHz bands utilized in WLAN. In both bands, the proposed antenna exhibits good impedance match, moderate gain (approximately 2 dBi), and sustainable omnidirectional-like radiation patterns in both principal planes. An equivalent circuit model of the antenna is also developed.

Sign in / Sign up

Export Citation Format

Share Document