scholarly journals Analysis of the Economic and Environmental Effects by the Offshore Wind Power Construction: In case of Kitakyushu City, Japan

2015 ◽  
Vol 1 (2) ◽  
pp. 159
Author(s):  
Woojong Jung
Keyword(s):  
Renewable Energy ◽  
Environmental Impact ◽  
Wind Power ◽  
Wind Turbines ◽  
Local Economy ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Offshore Wind Power ◽  
Offshore Wind Turbines ◽  
Production Value

The purpose of this study is to analyze the economic spillover effects and environmental impact of building offshore wind turbines on a local economy in Japan. Japan is facing a great turning point in its energy policy in the wake of the Great East Japan Earthquake, further increasing the importance of renewable energy. The offshore wind turbines experiment in Kitakyushu City is anticipated to showcase the potential of offshore wind power in Japan for the future and dynamize the local economy. As such, in this study, an economic and environmental impact assessment by Input–Output (I-O) analysis was conducted for the construction of the offshore wind turbines. The results show that building one hundred 3MW offshore wind turbine units will increase the induced production value by approximately 205.2 billion yen, equivalent to roughly 2.7% of Kitakyushu City’s total production value. Additionally, it is anticipated to create approximately 14 500 jobs. In terms of environmental impact, the increase in production is estimated to increase CO2 emissions by nearly 340 000 tonnes (an increase of approximately 2.1%). Accordingly, the environmental impact of building offshore wind turbines in Kitakyushu City is smaller than the economic impact, meaning that a sustainable between the economy and the environment can be found by the diffusion of renewable energy.

Development of a CFD-CSD Coupling Technique for Large Scale Offshore Wind Turbines

2020 ◽  
Author(s):  
Auraluck Pichitkul ◽  
Lakshmi N. Sankar
Keyword(s):  
Fluid Dynamics ◽  
Renewable Energy ◽  
Wind Turbines ◽  
Large Scale ◽  
Time History ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Renewable Energy Resources ◽  
Aerodynamic Loads ◽  
Offshore Wind Turbines

Abstract Wind engineering technology has been continuously investigated and developed over the past several decades in response to steadily growing demand for renewable energy resources, in order to meet the increased demand for power production, fixed and floating platforms with different mooring configurations have been fielded, accommodating large-scale offshore wind turbines in deep water areas. In this study, the aerodynamic loads on such systems are modeled using a computational structural dynamics solver called OpenFAST developed by National Renewable Energy Laboratory, coupled to an in-house computational fluid dynamics solver called GT-Hybrid. Coupling of the structural/aerodynamic motion time history with the CFD analysis is done using an open File I/O process. At this writing, only a one-way coupling has been attempted, feeding the blade motion and structural deformations from OpenFAST into the fluid dynamics analysis. The sectional aerodynamic loads for a large scale 5 MW offshore wind turbine are presented, and compared against the baseline OpenFAST simulations with classical blade element-momentum theory. Encouraging agreement has been observed.

Offshore Wind Turbines Operation and Maintenance in China: A Case Study of Donghai Bridge Offshore Wind Farm

2013 ◽  
Vol 448-453 ◽  
pp. 1871-1874
Author(s):  
Yuan Xie
Keyword(s):  
Wind Power ◽  
Wind Turbines ◽  
Wind Farm ◽  
Offshore Wind ◽  
Offshore Wind Power ◽  
Offshore Wind Turbines ◽  
Operation And Maintenance ◽  
Steady Stage ◽  
Power Project

China has great potential in offshore wind energy and makes an ambitious target for offshore wind power development. Operation and Maintenance (O&M) of offshore wind turbines become more and more important for China wind industry. This study introduces the current offshore wind power projects in China. Donghai Bridge Offshore Demonstration Wind Farm (Donghai Bridge Project) is the first commercial offshore wind power project in China, which was connected to grid in June 2010. O&M of Donghai Bridge Project represent the state-of-the-art of China offshore O&M. During the past two and half years, O&M of Donghai Bridge Project has gone through three phases and stepped into a steady stage. Its believed that analysis of O&M of Donghai Bridge Project is very helpful for Chinas offshore wind power in the future.

scholarly journals Floating offshore wind turbines - technology and potential

2020 ◽  
Vol 43 ◽  
pp. 89-94
Author(s):  
Aurel Dan Maimon
Keyword(s):  
Wind Power ◽  
Wind Turbines ◽  
Production Efficiency ◽  
Short Review ◽  
Offshore Wind ◽  
Offshore Wind Power ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Visual Impact ◽  
The One

"The main purpose of this paper is to present a short review of the actual progress on the floating offshore wind turbines. Floating offshore wind turbines have several advantages: overcoming the depth constraint, floating offshore wind turbines can be installed further offshore and therefore on the one hand have little or no visual impact from the coast, and on the other hand to take advantage of more constant and stronger winds, thus increasing the production efficiency of electricity. They are assembled to port and then transported to site with an ordinary tug, which can also bring them ashore for heavy maintenance or final dismantling. Floating wind power is the future of offshore wind power."

Optimal Redundancy and Maintenance Strategy Decisions for Offshore Wind Power Converters

2015 ◽  
Vol 22 (03) ◽  
pp. 1550015 ◽  
Author(s):  
Mahmood Shafiee ◽  
Michael Patriksson ◽  
Ann-Brith Strömberg ◽  
Lina Bertling Tjernberg
Keyword(s):  
Wind Power ◽  
Wind Turbines ◽  
Optimal Allocation ◽  
Power Converters ◽  
Power Converter ◽  
Offshore Wind ◽  
System Level ◽  
Offshore Wind Turbine ◽  
Maintenance Strategy ◽  
Offshore Wind Power

Analysis of field failure data collected from various wind farm databases indicates that the power converters are among the most critical components in offshore wind turbines, since they suffer from a high failure rate. One efficient approach to enhance the reliability and availability of the wind power systems is through using a redundant converter design, in which a set of power converters is placed together in parallel. The main advantage of a multiple parallel converter system is that the failure of one converter will not necessarily lead to the failure of the entire system. It may however increase the wind turbine's acquisition cost, volume, and weight. In this paper, we propose an approach of joint redundancy and maintenance strategy optimization for offshore wind power converters, aiming to simultaneously determine the "optimal allocation of redundant converters" and the "optimal threshold number of converters that are allowed to fail before sending a maintenance crew to the offshore platform". The optimal solution under various system-level constraints (such as reliability, weight, and the available space in nacelle) is derived and the conditions required to make using a redundant system beneficial are discussed. The proposed design is applied to an offshore wind turbine system and its performance is evaluated using a Monte-Carlo simulation technique. Finally, the results are compared with the conventional power converter system and a sensitivity analysis is conducted in order to make the proposed approach applicable for the next generation of wind turbines.

scholarly journals Maintenance Planning of Offshore Wind Turbine Using Condition Monitoring Information

2009 ◽  
Author(s):  
Jose´ G. Rangel-Rami´rez ◽  
John D. So̸rensen
Keyword(s):  
Condition Monitoring ◽  
Wind Turbines ◽  
Wind Farm ◽  
Offshore Structures ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Maintenance Planning ◽  
Offshore Wind Turbines ◽  
Inspection And Maintenance ◽  
Monitoring Information

Deterioration processes such as fatigue and corrosion are typically affecting offshore structures. To “control” this deterioration, inspection and maintenance activities are developed. Probabilistic methodologies represent an important tool to identify the suitable strategy to inspect and control the deterioration in structures such as offshore wind turbines (OWT). Besides these methods, the integration of condition monitoring information (CMI) can optimize the mitigation activities as an updating tool. In this paper, a framework for risk-based inspection and maintenance planning (RBI) is applied for OWT incorporating CMI, addressing this analysis to fatigue prone details in welded steel joints at jacket or tripod steel support structures for offshore wind turbines. The increase of turbulence in wind farms is taken into account by using a code-based turbulence model. Further, additional modes t integrate CMI in the RBI approach for optimal planning of inspection and maintenance. As part of the results, the life cycle reliabilities and inspection times are calculated, showing that earlier inspections are needed at in-wind farm sites. This is expected due to the wake turbulence increasing the wind load. With the integration of CMI by means Bayesian inference, a slightly change of first inspection times are coming up, influenced by the reduction of the uncertainty and harsher or milder external agents.

scholarly journals Improving the Strategy of Maintaining Offshore Wind Turbines through Petri Net Modelling

2021 ◽  
Vol 11 (2) ◽  
pp. 574
Author(s):  
Rundong Yan ◽  
Sarah Dunnett
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Petri Net ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Maintenance Costs ◽  
Offshore Wind Turbines ◽  
Major Repair ◽  
Wind Turbine System ◽  
Periodic Maintenance

In order to improve the operation and maintenance (O&M) of offshore wind turbines, a new Petri net (PN)-based offshore wind turbine maintenance model is developed in this paper to simulate the O&M activities in an offshore wind farm. With the aid of the PN model developed, three new potential wind turbine maintenance strategies are studied. They are (1) carrying out periodic maintenance of the wind turbine components at different frequencies according to their specific reliability features; (2) conducting a full inspection of the entire wind turbine system following a major repair; and (3) equipping the wind turbine with a condition monitoring system (CMS) that has powerful fault detection capability. From the research results, it is found that periodic maintenance is essential, but in order to ensure that the turbine is operated economically, this maintenance needs to be carried out at an optimal frequency. Conducting a full inspection of the entire wind turbine system following a major repair enables efficient utilisation of the maintenance resources. If periodic maintenance is performed infrequently, this measure leads to less unexpected shutdowns, lower downtime, and lower maintenance costs. It has been shown that to install the wind turbine with a CMS is helpful to relieve the burden of periodic maintenance. Moreover, the higher the quality of the CMS, the more the downtime and maintenance costs can be reduced. However, the cost of the CMS needs to be considered, as a high cost may make the operation of the offshore wind turbine uneconomical.

scholarly journals Impact of Typhoons on Floating Offshore Wind Turbines: A Case Study of Typhoon Mangkhut

2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Jiawen Li ◽  
Jingyu Bian ◽  
Yuxiang Ma ◽  
Yichen Jiang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Safety Evaluation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Motion Response ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Coupling Motion

A typhoon is a restrictive factor in the development of floating wind power in China. However, the influences of multistage typhoon wind and waves on offshore wind turbines have not yet been studied. Based on Typhoon Mangkhut, in this study, the characteristics of the motion response and structural loads of an offshore wind turbine are investigated during the travel process. For this purpose, a framework is established and verified for investigating the typhoon-induced effects of offshore wind turbines, including a multistage typhoon wave field and a coupled dynamic model of offshore wind turbines. On this basis, the motion response and structural loads of different stages are calculated and analyzed systematically. The results show that the maximum response does not exactly correspond to the maximum wave or wind stage. Considering only the maximum wave height or wind speed may underestimate the motion response during the traveling process of the typhoon, which has problems in guiding the anti-typhoon design of offshore wind turbines. In addition, the coupling motion between the floating foundation and turbine should be considered in the safety evaluation of the floating offshore wind turbine under typhoon conditions.

scholarly journals Physical Modelling of Offshore Wind Turbine Foundations for TRL (Technology Readiness Level) Studies

2021 ◽  
Vol 9 (6) ◽  
pp. 589
Author(s):  
Subhamoy Bhattacharya ◽  
Domenico Lombardi ◽  
Sadra Amani ◽  
Muhammad Aleem ◽  
Ganga Prakhya ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Prior Experience ◽  
Physical Modelling ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Foundation Design ◽  
Offshore Wind Turbines ◽  
Sea Bed ◽  
Geological Conditions

Offshore wind turbines are a complex, dynamically sensitive structure due to their irregular mass and stiffness distribution, and complexity of the loading conditions they need to withstand. There are other challenges in particular locations such as typhoons, hurricanes, earthquakes, sea-bed currents, and tsunami. Because offshore wind turbines have stringent Serviceability Limit State (SLS) requirements and need to be installed in variable and often complex ground conditions, their foundation design is challenging. Foundation design must be robust due to the enormous cost of retrofitting in a challenging environment should any problem occur during the design lifetime. Traditionally, engineers use conventional types of foundation systems, such as shallow gravity-based foundations (GBF), suction caissons, or slender piles or monopiles, based on prior experience with designing such foundations for the oil and gas industry. For offshore wind turbines, however, new types of foundations are being considered for which neither prior experience nor guidelines exist. One of the major challenges is to develop a method to de-risk the life cycle of offshore wind turbines in diverse metocean and geological conditions. The paper, therefore, has the following aims: (a) provide an overview of the complexities and the common SLS performance requirements for offshore wind turbine; (b) discuss the use of physical modelling for verification and validation of innovative design concepts, taking into account all possible angles to de-risk the project; and (c) provide examples of applications in scaled model tests.

scholarly journals A Review of Recent Advancements in Offshore Wind Turbine Technology

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 579
Author(s):  
Taimoor Asim ◽  
Sheikh Zahidul Islam ◽  
Arman Hemmati ◽  
Muhammad Saif Ullah Khalid
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Structural Integrity ◽  
Turbine Blades ◽  
Offshore Wind ◽  
System Level ◽  
Offshore Wind Turbine ◽  
Component Level ◽  
Foundation Design ◽  
Offshore Wind Turbines

Offshore wind turbines are becoming increasingly popular due to their higher wind energy harnessing capabilities and lower visual pollution. Researchers around the globe have been reporting significant scientific advancements in offshore wind turbines technology, addressing key issues, such as aerodynamic characteristics of turbine blades, dynamic response of the turbine, structural integrity of the turbine foundation, design of the mooring cables, ground scouring and cost modelling for commercial viability. These investigations range from component-level design and analysis to system-level response and optimization using a multitude of analytical, empirical and numerical techniques. With such wide-ranging studies available in the public domain, there is a need to carry out an extensive yet critical literature review on the recent advancements in offshore wind turbine technology. Offshore wind turbine blades’ aerodynamics and the structural integrity of offshore wind turbines are of particular importance, which can lead towards system’s optimal design and operation, leading to reduced maintenance costs. Thus, in this study, our focus is to highlight key knowledge gaps in the scientific investigations on offshore wind turbines’ aerodynamic and structural response. It is envisaged that this study will pave the way for future concentrated efforts in better understanding the complex behavior of these machines.

scholarly journals Proposal and Performance Study of a Novel Mooring System with Six Mooring Lines for Spar-Type Offshore Wind Turbines

2021 ◽  
Vol 11 (24) ◽  
pp. 11665
Author(s):  
Shi Liu ◽  
Yi Yang ◽  
Chao Wang ◽  
Yuangang Tu
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Irregular Waves ◽  
Offshore Wind Turbine ◽  
Mooring System ◽  
Mooring Lines ◽  
Included Angle ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Spar-type floating offshore wind turbines commonly vibrate excessively when under the coupling impact of wind and wave. The wind turbine vibration can be controlled by developing its mooring system. Thus, this study proposes a novel mooring system for the spar-type floating offshore wind turbine. The proposed mooring system has six mooring lines, which are divided into three groups, with two mooring lines in the same group being connected to the same fairlead. Subsequently, the effects of the included angle between the two mooring lines on the mooring-system’s performance are investigated. Then, these six mooring lines are connected to six independent fairleads for comparison. FAST is utilized to calculate wind turbine dynamic response. Wind turbine surge, pitch, and yaw movements are presented and analyzed in time and frequency domains to quantitatively evaluate the performances of the proposed mooring systems. Compared with the mooring system with six fairleads, the mooring system with three fairleads performed better. When the included angle was 40°, surge, pitch, and yaw movement amplitudes of the wind turbine reduced by 39.51%, 6.8%, and 12.34%, respectively, when under regular waves; they reduced by 56.08%, 25.00%, and 47.5%, respectively, when under irregular waves. Thus, the mooring system with three fairleads and 40° included angle is recommended.

Sign in / Sign up

Export Citation Format

Share Document