Creep Analysis of Wafer Level Chip Scale Package (WLCSP) With 96.5Sn-3.5Ag and 100In Lead-Free Solder Joints and Microvia Build-Up Printed Circuit Board

2002 ◽  
Vol 124 (2) ◽  
pp. 69-76 ◽  
Author(s):  
John H. Lau ◽  
Stephen H. Pan ◽  
Chris Chang
Keyword(s):  
Shear Stress ◽  
Printed Circuit Board ◽  
Circuit Board ◽  
Lead Free ◽  
Lead Free Solder ◽  
Wafer Level ◽  
Shear Creep ◽  
Printed Circuit ◽  
Chip Scale Package ◽  
Free Solder

In this study, time-temperature-dependent nonlinear analyses of lead-free solder bumped wafer level chip scale package (WLCSP) on printed circuit board (PCB) assemblies subjected to thermal cycling conditions are presented. Two different lead-free solder alloys are considered, namely, 96.5wt percent Sn-3.5wt percent Ag and 100wt percent In. The 62wt percent Sn-36wt percent Pb-2wt percent Ag solder alloy is also considered to establish a baseline. All of these solder alloys are assumed to obey the Garofalo-Arrhenius steady-state creep constitutive law. The shear stress and shear creep strain hysteresis loops, shear stress history, and shear creep strain history at the corner solder joint are presented for a better understanding of the thermal-mechanical behaviors of lead-free solder bumped WLCSP on PCB assemblies. Also, the effects of microvia build-up PCB on the WLCSP Solder joint reliability are investigated.

Creep Analysis of Wafer Level Chip Scale Package (WLCSP) With 96.5Sn-3.5Ag and 100In Lead-Free Solder Joints and Microvia Build-Up Printed Circuit Board

2000 ◽  
Author(s):  
John H. Lau ◽  
Stephen H. Pan ◽  
Chris Chang
Keyword(s):  
Shear Stress ◽  
Printed Circuit Board ◽  
Circuit Board ◽  
Lead Free ◽  
Lead Free Solder ◽  
Wafer Level ◽  
Shear Creep ◽  
Printed Circuit ◽  
Chip Scale Package ◽  
Free Solder

Abstract In this study, time-temperature-dependent nonlinear analyses of lead-free solder bumped wafer level chip scale package (WLCSP) on printed circuit board (PCB) assemblies subjected to thermal cycling conditions are presented. Two different lead-free solder alloys are considered, namely, 96.5wt%Sn-3.5wt%Ag and 100wt%In. The 62wt%Sn-36wt%Pb-2wt%Ag solder alloy is also considered to establish a baseline. All of these solder alloys are assumed to obey the Garofalo-Arrhenius steady-state creep constitutive law. The shear stress and shear creep strain hysteresis loops, shear stress history, and shear creep strain history at the corner solder joint are presented for a better understanding of the thermal-mechanical behaviors of lead-free solder bumped WLCSP on PCB assemblies. Also, the effects of microvia build-up PCB on the WLCSP solder joint reliability are investigated.

Site Redressing Techniques and Rework of Lead-Free Chip Scale Packages

2003 ◽  
Author(s):  
Arun Gowda ◽  
Anthony Primavera ◽  
K. Srihari
Keyword(s):  
Printed Circuit Board ◽  
Circuit Board ◽  
Lead Free ◽  
Lead Free Solder ◽  
Solder Paste ◽  
Printed Circuit ◽  
Free Solder ◽  
The Individual ◽  
Component Assembly ◽  
Free Area

The implementation of lead-free solder into an electronics assembly process necessitates the reassessment of the individual factors involved in component attachment and rework. A component assembly undergoes multiple thermal cycles during rework. With the use of lead-free solder, the assemblies are subjected to higher assembly and rework temperatures than those required for eutectic tin-lead assemblies. The rework of lead-free area array components involves the removal of defective component, preparation of the printed circuit board attachment pad (site redressing), solder paste replenishment or flux deposition, and component placement and reflow. This paper primarily focuses on the site redressing aspect of lead-free rework, followed by the development of rework processes for lead-free chip scale packages utilizing the knowledge gained in the site redressing studies.

Study of immersion silver and tin printed-circuit-board surface finishes in lead-free solder applications

2004 ◽  
Vol 33 (9) ◽  
pp. 977-990 ◽  
Author(s):  
Minna Arra ◽  
Dongkai Shangguan ◽  
Dongji Xie ◽  
Janne Sundelin ◽  
Toivo Lepistö ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
Circuit Board ◽  
Lead Free ◽  
Lead Free Solder ◽  
Printed Circuit ◽  
Surface Finishes ◽  
Board Surface ◽  
Free Solder ◽  
Immersion Silver

The Effects of Temperature Cyclic Loading on Lead-Free Solder Joints of Wafer Level Chip Scale Package by Taguchi Method

2008 ◽  
Vol 130 (1) ◽  
Author(s):  
Wen-Ren Jong ◽  
Hsin-Chun Tsai ◽  
Hsiu-Tao Chang ◽  
Shu-Hui Peng
Keyword(s):  
Low Temperature ◽  
Shear Strain ◽  
Solder Joints ◽  
Strain Range ◽  
Lead Free ◽  
Lead Free Solder ◽  
Wafer Level ◽  
Chip Scale Package ◽  
Free Solder ◽  
Plastic Creep

In this study, the effects of the temperature cyclic loading on three lead-free solder joints of 96.5Sn–3.5Ag, 95.5Sn–3.8Ag-0.7Cu, and 95.5Sn–3.9Ag-0.6Cu bumped wafer level chip scale package (WLCSP) on printed circuit board assemblies are investigated by Taguchi method. The orthogonal arrays of L16 is applied to examine the shear strain effects of solder joints under five temperature loading parameters of the temperature ramp rate, the high and low temperature dwells, and the dwell time of both high and low temperatures by means of three simulated analyses of creep, plastic, and plastic-creep behavior on the WLCSP assemblies. It is found that the temperature dwell is the most significant factor on the effects of shear strain range from these analyses. The effect of high temperature dwell on the shear strain range is larger than that of low temperature dwell in creep analysis, while the effect of high temperature dwell on the shear strain range is smaller than that of low temperature dwell in both plastic and plastic-creep analyses.

Failure Analysis Techniques for Lead-Free Solder Joints

2005 ◽  
Author(s):  
Todd Castello ◽  
Dan Rooney ◽  
Dongkai Shangguan
Keyword(s):  
Failure Analysis ◽  
Printed Circuit Board ◽  
Failure Modes ◽  
Circuit Board ◽  
Lead Free ◽  
Lead Free Solder ◽  
Printed Circuit Board Assembly ◽  
Analysis Techniques ◽  
Solder Interconnects ◽  
Free Solder

Abstract Printed circuit board assembly with lead free solder is now a reality for most global electronics manufacturers. Extensive research and development has been conducted to bring lead free assembly processes to a demonstrated proficiency. Failure analysis has been an integral part of this effort and will continue to be needed to solve problems in volume production. Many failure analysis techniques can be directly applied to study lead free solder interconnects, while others may require some modification in order to provide adequate analysis results. In this paper, several of the most commonly applied techniques for solder joint failure analysis will be reviewed, including visual inspection, x-ray radiography, mechanical strength testing, dye & pry, metallography, and microscopy/photomicrography, comparing their application to lead bearing and lead free solder interconnects. Common failure modes and mechanisms will be described with examples specific to lead free solders, following PCB assembly as well as after accelerated reliability tests.

Sign in / Sign up

Export Citation Format

Share Document