The Employment of Hydrogenerated Fuels From Natural Gas Reforming: Gas Turbine and Combustion Analysis

2004 ◽  
Vol 126 (3) ◽  
pp. 489-497 ◽  
Author(s):  
Fabio Bozza ◽  
Maria Cristina Cameretti ◽  
Raffaele Tuccillo
Keyword(s):  
Power Plant ◽  
Natural Gas ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Cfd Simulation ◽  
Combustion Process ◽  
Plant Performance ◽  
Nitric Oxides ◽  
Performance And Emission ◽  
Natural Gas Reforming

An integrated method for power plant analysis, including rotating component matching and CFD simulation of the combustion process, is applied to the study of gas turbines supplied with hydrogenated fuels originating from the natural gas reforming. The method proposed by the authors allows estimation of the power plant performance and emission in the gas turbine operating range. A comparison is then carried out between the plant behavior with conventional fuelling and with decarbonised fuel supply. Attention is also paid to the study of the combustion regimes with either natural gas or fuels with increasing hydrogen contents, in order to achieve a realistic insight of both the temperature distributions and the growth of nitric oxides throughout the combustion chamber.

The Employment of Hydrogenated Fuels From Natural Gas Reforming: Gas Turbine and Combustion Analysis

2002 ◽  
Author(s):  
Fabio Bozza ◽  
Maria Cristina Cameretti ◽  
Raffaele Tuccillo
Keyword(s):  
Power Plant ◽  
Natural Gas ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Cfd Simulation ◽  
Combustion Process ◽  
Plant Performance ◽  
Nitric Oxides ◽  
Performance And Emission ◽  
Natural Gas Reforming

An integrated method for power plant analysis, including rotating component matching and CFD simulation of the combustion process, is applied to the study of gas turbines supplied with hydrogenated fuels originating from the natural gas reforming. The method proposed by the authors allows estimation of the power plant performance and emission in the gas turbine operating range. A comparison is then carried out between the plant behaviour with conventional fuelling and with decarbonised fuel supply. Attention is also paid to the study of the combustion regimes with either natural gas or fuels with increasing hydrogen contents, in order to achieve a realistic insight of both the temperature distributions and the growth of nitric oxides throughout the combustion chamber.

Short-Term Optimization of a Combined Cycle Power Plant Integrated With an Inlet Air Conditioning Unit

2020 ◽  
Author(s):  
Weimar Mantilla ◽  
José García ◽  
Rafael Guédez ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Air Conditioning ◽  
Combined Cycle ◽  
Plant Performance ◽  
Mixed Integer ◽  
Environmental Load ◽  
Turbine Inlet ◽  
The Impact

Abstract Under new scenarios with high shares of variable renewable electricity, combined cycle gas turbines (CCGT) are required to improve their flexibility, in terms of ramping capabilities and part-load efficiency, to help balance the power system. Simultaneously, liberalization of electricity markets and the complexity of its hourly price dynamics are affecting the CCGT profitability, leading the need for optimizing its operation. Among the different possibilities to enhance the power plant performance, an inlet air conditioning unit (ICU) offers the benefit of power augmentation and “minimum environmental load” (MEL) reduction by controlling the gas turbine inlet temperature using cold thermal energy storage and a heat pump. Consequently, an evaluation of a CCGT integrated with this inlet conditioning unit including a day-ahead optimized operation strategy was developed in this study. To establish the hourly dispatch of the power plant and the operation mode of the inlet conditioning unit to either cool down or heat up the gas turbine inlet air, a mixed-integer linear optimization (MILP) was formulated using MATLAB, aiming to maximize the operational profit of the plant within a 24-hours horizon. To assess the impact of the proposed unit operating under this dispatch strategy, historical data of electricity and natural gas prices, as well as meteorological data and CO2 emission allowances price, have been used to perform annual simulations of a reference power plant located in Turin, Italy. Furthermore, different equipment capacities and parameters have been investigated to identify trends of the power plant performance. Lastly, a sensitivity analysis on market conditions to test the control strategy response was also considered. Results indicate that the inlet conditioning unit, together with the dispatch optimization, increases the power plant’s operational profit by achieving a wider operational range, particularly important during peak and off-peak periods. For the specific case study, it is estimated that the net present value of the CCGT integrated with the ICU is 0.5% higher than the power plant without the unit. In terms of technical performance, results show that the unit reduces the minimum environmental load by approximately 1.34% and can increase the net power output by 0.17% annually.

Performance and Cost Analysis of Advanced Gas Turbine Cycles With Precombustion CO2 Capture

2008 ◽  
Vol 131 (2) ◽  
Author(s):  
Stéphanie Hoffmann ◽  
Michael Bartlett ◽  
Matthias Finkenrath ◽  
Andrei Evulet ◽  
Tord Peter Ursin
Keyword(s):  
High Pressure ◽  
Power Plant ◽  
Natural Gas ◽  
Gas Turbine ◽  
Co2 Capture ◽  
Gas Turbines ◽  
High Efficiency ◽  
Combined Cycle ◽  
Co2 Separation ◽  
The Cost

This paper presents the results of an evaluation of advanced combined cycle gas turbine plants with precombustion capture of CO2 from natural gas. In particular, the designs are carried out with the objectives of high efficiency, low capital cost, and low emissions of carbon dioxide to the atmosphere. The novel cycles introduced in this paper are comprised of a high-pressure syngas generation island, in which an air-blown partial oxidation reformer is used to generate syngas from natural gas, and a power island, in which a CO2-lean syngas is burnt in a large frame machine. In order to reduce the efficiency penalty of natural gas reforming, a significant effort is spent evaluating and optimizing alternatives to recover the heat released during the process. CO2 is removed from the shifted syngas using either CO2 absorbing solvents or a CO2 membrane. CO2 separation membranes, in particular, have the potential for considerable cost or energy savings compared with conventional solvent-based separation and benefit from the high-pressure level of the syngas generation island. A feasibility analysis and a cycle performance evaluation are carried out for large frame gas turbines such as the 9FB. Both short-term and long-term solutions have been investigated. An analysis of the cost of CO2 avoided is presented, including an evaluation of the cost of modifying the combined cycle due to CO2 separation. The paper describes a power plant reaching the performance targets of 50% net cycle efficiency and 80% CO2 capture, as well as the cost target of 30$ per ton of CO2 avoided (2006 Q1 basis). This paper indicates a development path to this power plant that minimizes technical risks by incremental implementation of new technology.

scholarly journals High Efficiency-Coal and Gas (HE-C&G): An Advanced Hybrid Power Plant Concept With Sequential Combustion Gas Turbines GT24/GT26

1997 ◽  
Author(s):  
Mircea Fetescu
Keyword(s):  
Power Plant ◽  
Natural Gas ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Efficiency ◽  
Combustion Gas ◽  
Hybrid Power ◽  
Wide Range ◽  
Hybrid Power Plant ◽  
Very High

The High Efficiency-Coal and Gas (HE-C&G) is a hybrid power plant concept integrating Conventional Steam Power Plants (CSPP) and gas turbine / combined cycle plants. The gas turbine exhaust gas energy is recovered in the HRSG providing partial condensate and feedwater preheating and generating steam corresponding to the main boiler live steam conditions (second steam source for the ST). The concept, exhibiting very high design flexibility, integrates the high performance Sequential Combustion gas turbines GT24/GT26 technology into a wide range of existing or new CSPP. Although HE-C&G refers to coal as the most abundant fossil fuel resource, oil or natural gas fired steam plants could be also designed or converted following the same principle. The HE-C&G provides very high marginal efficiencies on natural gas, up to and above 60%, very high operating and dispatching flexibility and on-line optimization of fuel and O&M costs at low capital investment. This paper emphasizes the operating flexibility and resulting benefits, recommending the HE-C&G as one of the most profitable options for generating power especially for conversion of existing CSPP with gas turbines.

Development of a Combined Cycle Gas Turbine/Steam Plant for Training Marine and Power Engineers

2007 ◽  
Author(s):  
W. Peter Sarnacki ◽  
Richard Kimball ◽  
Barbara Fleck
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Power Industry ◽  
Combined Cycle ◽  
Plant Performance ◽  
Engineering Programs ◽  
Hands On ◽  
Steam Plant

The integration of micro turbine engines into the engineering programs offered at Maine Maritime Academy (MMA) has created a dynamic, hands-on approach to learning the theoretical and operational characteristics of a turbojet engine. Maine Maritime Academy is a fully accredited college of Engineering, Science and International Business located on the coast of Maine and has over 850 undergraduate students. The majority of the students are enrolled in one of five majors offered at the college in the Engineering Department. MMA already utilizes gas turbines and steam plants as part of the core engineering training with fully operational turbines and steam plant laboratories. As background, this paper will overview the unique hands-on nature of the engineering programs offered at the institution with a focus of implementation of a micro gas turbine trainer into all engineering majors taught at the college. The training demonstrates the effectiveness of a working gas turbine to translate theory into practical applications and real world conditions found in the operation of a combustion turbine. This paper presents the efforts of developing a combined cycle power plant for training engineers in the operation and performance of such a plant. Combined cycle power plants are common in the power industry due to their high thermal efficiencies. As gas turbines/electric power plants become implemented into marine applications, it is expected that combined cycle plants will follow. Maine Maritime Academy has a focus on training engineers for the marine and stationary power industry. The trainer described in this paper is intended to prepare engineers in the design and operation of this type of plant, as well as serve as a research platform for operational and technical study in plant performance. This work describes efforts to combine these laboratory resources into an operating combined cycle plant. Specifically, we present efforts to integrate a commercially available, 65 kW gas turbine generator system with our existing steam plant. The paper reviews the design and analysis of the system to produce a 78 kW power plant that approaches 35% thermal efficiency. The functional operation of the plant as a trainer is presented as the plant is designed to operate with the same basic functionality and control as a larger commercial plant.

CFD Simulation of a Microturbine Annular Combustion Chamber Fuelled With Methane and Biomass Pyrolysis Syngas: Preliminary Results

2009 ◽  
Author(s):  
Francesco Fantozzi ◽  
Paolo Laranci ◽  
Michele Bianchi ◽  
Andrea De Pascale ◽  
Michele Pinelli ◽  
...  
Keyword(s):  
Experimental Data ◽  
Natural Gas ◽  
Combustion Chamber ◽  
Gas Turbines ◽  
Cfd Simulation ◽  
Combustion Process ◽  
Calorific Value ◽  
Methane Combustion ◽  
Pollutant Emissions ◽  
Preliminary Results

Micro gas turbines could be profitably used, for distributed energy production, also exploiting low calorific value biomass-derived fuels, obtained by means of integrated pyrolysis and/or gasification processes. These synthesis gases show significant differences with respect to natural gas (in terms of composition, low calorific value, hydrogen content, tar and particulate matter content) that may turn into ignition problems, combustion instabilities, difficulties in emission control and fouling. CFD simulation of the combustion chamber is a key instrument to identify main criticalities arising when using these gases, in order to modify existing geometries and to develop new generation combustion chambers for use with low calorific value gases. This paper describes the numerical activity carried out to analyze the combustion process occurring inside an existing microturbine annular combustor. A CFD study of the combustion process performed with different computational codes is introduced and some preliminary results are reported in the paper. A comparison of results obtained with the different codes is provided, for the reference case of methane combustion. A first evaluation of the pollutant emissions and a comparison with the available experimental data is also provided in the paper, showing in particular a good matching of experimental data on NOx emissions at different load conditions. Moreover, the carried out investigation concerns the case of operation with a syngas fuel derived from pyrolysis of biomass and finally the case of syngas and natural gas co-firing. This combustion condition is simulated with a simple reduced chemical kinetic scheme, in order to assess only the key issues rising with this fuel in comparison with the case of methane combustion. The analysis shows that in case of syngas operation the combustor internal temperature hot spots are reduced and the primary zone flame tends to stabilize closer to the injector, with possible implications on the emission release.

Influence of Variations in the Natural Gas Properties on the Combustion Process in Terms of Emissions and Pulsations for a Heavy-Duty Gas Turbine

2003 ◽  
Author(s):  
Lars O. Nord ◽  
Helmer G. Andersen
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combustion Process ◽  
Mechanical Damage ◽  
Combustion Noise ◽  
Combustion Instabilities ◽  
Ambient Conditions ◽  
Process Data ◽  
Gas Properties

The natural gas supply can vary significantly on a day-to-day or even hour-to-hour basis for a power plant equipped with gas turbines. The influence of such variations could potentially have an adverse effect on the combustion process in terms of emissions and acoustic pulsations, even if the fuel properties are within the original equipment manufacturer (OEM) guidelines. Since the operation of a gas turbine typically requires steady emissions within the air permit as well as low pulsations to limit mechanical damage on the unit, fuel variations could significantly affect how the unit can be operated. To investigate this matter, data from an ALSTOM GT11N1 gas turbine was collected and studied during a 6-month period. The data acquired included on-line gas chromatograph readings, frequency-analyzed combustion instabilities, various process data, as well as ambient conditions. The collected data shows the magnitude of the changes in the emissions and combustion noise with changes in the fuel. The conclusion is that normal day-to-day variations in the natural gas properties do not have a significant effect on the emissions and combustion instabilities; however, larger sudden changes, as exemplified in the paper, could lead to considerable changes in the combustion behavior of the unit.

scholarly journals Comparative Analysis of Gasification and Adiabatic Digestion of Corn for Practical Implementation in Conventional Gas Turbines

Gases ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 92-105
Author(s):  
Milana Guteša Božo ◽  
Agustin Valera-Medina
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Agricultural Waste ◽  
Waste To Energy ◽  
Plant Performance ◽  
Practical Implementation ◽  
Fuel Quality ◽  
Corn Cob

Clean, more responsible energy production in gas turbine power plants is a challenge. Interestingly, various alternative sources could be found in agricultural locations with great potential of being transformed from agricultural waste to energy. Corn cob gasification gas could be successfully implemented in gas turbines through co-firing with natural gas. Concurrently, agricultural biogas could also be employed for such a purpose. The technology could be implemented in locations such as Vojvodina, Serbia, which is an agricultural region with great potential for producing biogas from agricultural waste. Therefore, this paper approaches the practical implementation of gas produced by adiabatic corn digestion with CO2 recirculation. Five different cases were assessed. The results are compared to previous analyses that used co-firing of the corn cob gasification gas in representative gas turbine systems. Impacts of the fuel composition on the characteristics of combustion were analyzed using CHEMKIN PRO with GRI–Mech 3.0. Impacts of fuel quality on the power plant performance were analyzed through calculations with a numerical model based on a Brayton cycle of 3.9 MW power output. The application shows acceptable values during co-firing with natural gas without modification of the overall system, with better outlet parameters compared to pure corn gasification gas.

Performance and Cost Analysis of Advanced Gas Turbine Cycles With Pre-Combustion CO2 Capture

2008 ◽  
Author(s):  
Ste´phanie Hoffmann ◽  
Michael Bartlett ◽  
Matthias Finkenrath ◽  
Andrei Evulet ◽  
Tord Peter Ursin
Keyword(s):  
High Pressure ◽  
Power Plant ◽  
Natural Gas ◽  
Gas Turbine ◽  
Co2 Capture ◽  
Gas Turbines ◽  
High Efficiency ◽  
Combined Cycle ◽  
Co2 Separation ◽  
The Cost

This paper presents the results of an evaluation of advanced combined cycle gas turbine plants with pre-combustion capture of CO2 from natural gas. In particular, the designs are carried out with the objectives of high efficiency, low capital cost and low emissions of carbon dioxide to the atmosphere. The novel cycles introduced in this paper are comprised of a high-pressure syngas generation island, in which an air-blown POX reformer is used to generate syngas from natural gas, and a power island, in which a CO2-lean syngas is burnt in a large frame machine. In order to reduce the efficiency penalty of natural gas reforming, a significant effort is spent evaluating and optimizing alternatives to recover the heat released during the process. CO2 is removed from the shifted syngas using either CO2 absorbing solvents or a CO2 membrane. CO2 separation membranes, in particular, have the potential for considerable cost or energy savings compared to conventional solvent-based separation and benefit from the high pressure level of the syngas generation island. A feasibility analysis and a cycle performance evaluation are carried out for large frame gas turbines such as the 9FB. Both short term and long term solutions have been investigated. An analysis of the cost of CO2 avoided is presented, including an evaluation of the cost of modifying the combined cycle due to CO2 separation. The paper describes a power plant reaching the performance targets of 50% net cycle efficiency and 80% CO2 capture, as well as the cost target of 30$ per ton of CO2 avoided. This paper indicates a development path to this power plant that minimizes technical risks by incremental implementation of new technology.

A Sequential Approach for Gas Turbine Power Plant Preventive Maintenance Scheduling

2005 ◽  
Author(s):  
Yongjun Zhao ◽  
Vitali Volovoi ◽  
Mark Waters ◽  
Dimitri Mavris
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Preventive Maintenance ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Maintenance Scheduling ◽  
Plant Performance ◽  
Optimization Approach ◽  
Gas Turbine Power Plant

Traditionally the gas turbine power plant preventive maintenances are scheduled with constant maintenance intervals based on recommendations from the equipment suppliers. The preventive maintenances are based on fleet wide experiences, and they are scheduled in a one-size-fit-all fashion. However, in reality, the operating conditions for each gas turbine may vary from site to site, and from unit to unit. Furthermore, the gas turbine is a repairable deteriorating system, and preventive maintenance usually restores only part of its performance. This suggests the gas turbines need more frequent inspection and maintenance as it ages. A unit specific sequential preventive maintenance approach is therefore needed for gas turbine power plants preventive maintenance scheduling. Traditionally the optimization criteria for preventive maintenance scheduling is usually cost based. In the deregulated electric power market, a profit based optimization approach is expected to be more effective than the cost based approach. In such an approach, power plant performance, reliability, and the market dynamics are considered in a joint fashion. In this paper, a novel idea that economics drive maintenance expense and frequency to more frequent repairs and greater expense as the equipment and components age is introduced, and a profit based unit specific sequential preventive maintenance scheduling methodology is developed. To demonstrate the feasibility of the proposed approach, this methodology is implemented using a base load combined cycle power plant with single gas turbine unit.

Sign in / Sign up

Export Citation Format

Share Document