Numerical Optimization of the Thermoelectric Cooling Devices

2006 ◽  
Vol 129 (3) ◽  
pp. 339-347 ◽  
Author(s):  
Boris Abramzon
Keyword(s):  
Electric Current ◽  
Optimization Problems ◽  
Random Search ◽  
Thermal Conductance ◽  
Numerical Approach ◽  
Physical Parameters ◽  
Optimization Approach ◽  
Independent Variables ◽  
Adaptive Random Search ◽  
Optimization Search

The present study proposes a unified numerical approach to the problem of optimum design of the thermoelectric devices for cooling electronic components. The standard mathematical model of a single-stage thermoelectric cooler (TEC) with constant material properties is employed. The model takes into account the thermal resistances from the hot and cold sides of the TEC. Values of the main physical parameters governing the TEC performance (Seebeck coefficient, electrical resistance, and thermal conductance) are derived from the manufacturer catalog data on the maximum achievable temperature difference, and the corresponding electric current and voltage. The optimization approach is illustrated with several examples for different design objective functions, variables, and constraints. The objective for the optimization search is the maximization of the total cooling rate or the performance coefficient of the cooling device. The independent variables for the optimization search are as follows: The number of the thermoelectric modules, the electric current, and the cold side temperature of the TEC. Additional independent variables in other cases include the number of thermoelectric couples and the area-to-height ratio of the thermoelectric pellet. In the present study, the optimization problems are solved numerically using the so-called multistart adaptive random search method.

Numerical Optimization of the Thermoelectric Cooling Devices

2005 ◽  
Author(s):  
B. Abramzon
Keyword(s):  
Electric Current ◽  
Optimum Design ◽  
Random Search ◽  
Thermal Conductance ◽  
Physical Parameters ◽  
Thermoelectric Cooling ◽  
Thermoelectric Coolers ◽  
Independent Variables ◽  
Cooling Devices ◽  
Optimization Search

The present study proposes the unified numerical approach to the problem of optimum design of the thermoelectric devices for cooling electronic components. The method is illustrated with several examples which are based on the standard mathematical model of a single-stage thermoelectric cooler with constant material properties. The model takes into account the thermal resistances from the hot and cold sides of the TEC. Values of the main physical parameters governing the TEC performance (Zeebeck coefficient, electrical resistance and thermal conductance) are derived from the manufacturer catalog data on the maximum achievable temperature difference, and the corresponding electric current and voltage. The independent variables for the optimization search are the number of the thermoelectric coolers, the electric current and the cold side temperature of the TEC. The additional independent variables in other cases are the number of thermoelectric couples and the height-to area ratio of the thermoelectric pellet. The objective for the optimization search is the maximum of the total cooling rate or maximum of COP. In the present study, the problems of optimum design of thermoelectric cooling devices are solved using the so-called Multistart Adaptive Random Search (MARS) method [16].

A microbial treatment population dynamics optimization approach

2021 ◽  
pp. 1-15
Author(s):  
Jinding Gao
Keyword(s):  
Population Dynamics ◽  
Information Exchange ◽  
Information Diffusion ◽  
Optimization Problems ◽  
Microbial Control ◽  
Function Optimization ◽  
Optimization Approach ◽  
Dynamics Model ◽  
Population Dynamics Model ◽  
Number Of Individuals

In order to solve some function optimization problems, Population Dynamics Optimization Algorithm under Microbial Control in Contaminated Environment (PDO-MCCE) is proposed by adopting a population dynamics model with microbial treatment in a polluted environment. In this algorithm, individuals are automatically divided into normal populations and mutant populations. The number of individuals in each category is automatically calculated and adjusted according to the population dynamics model, it solves the problem of artificially determining the number of individuals. There are 7 operators in the algorithm, they realize the information exchange between individuals the information exchange within and between populations, the information diffusion of strong individuals and the transmission of environmental information are realized to individuals, the number of individuals are increased or decreased to ensure that the algorithm has global convergence. The periodic increase of the number of individuals in the mutant population can greatly increase the probability of the search jumping out of the local optimal solution trap. In the iterative calculation, the algorithm only deals with 3/500∼1/10 of the number of individual features at a time, the time complexity is reduced greatly. In order to assess the scalability, efficiency and robustness of the proposed algorithm, the experiments have been carried out on realistic, synthetic and random benchmarks with different dimensions. The test case shows that the PDO-MCCE algorithm has better performance and is suitable for solving some optimization problems with higher dimensions.

scholarly journals GMBO: Group Mean-Based Optimizer for Solving Various Optimization Problems

Mathematics ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1190
Author(s):  
Mohammad Dehghani ◽  
Zeinab Montazeri ◽  
Štěpán Hubálovský
Keyword(s):  
Optimization Algorithm ◽  
Optimization Problems ◽  
Search Algorithm ◽  
Random Search ◽  
Optimization Algorithms ◽  
Gravitational Search Algorithm ◽  
Main Idea ◽  
Population Based ◽  
Grey Wolf Optimizer ◽  
Whale Optimization

There are many optimization problems in the different disciplines of science that must be solved using the appropriate method. Population-based optimization algorithms are one of the most efficient ways to solve various optimization problems. Population-based optimization algorithms are able to provide appropriate solutions to optimization problems based on a random search of the problem-solving space without the need for gradient and derivative information. In this paper, a new optimization algorithm called the Group Mean-Based Optimizer (GMBO) is presented; it can be applied to solve optimization problems in various fields of science. The main idea in designing the GMBO is to use more effectively the information of different members of the algorithm population based on two selected groups, with the titles of the good group and the bad group. Two new composite members are obtained by averaging each of these groups, which are used to update the population members. The various stages of the GMBO are described and mathematically modeled with the aim of being used to solve optimization problems. The performance of the GMBO in providing a suitable quasi-optimal solution on a set of 23 standard objective functions of different types of unimodal, high-dimensional multimodal, and fixed-dimensional multimodal is evaluated. In addition, the optimization results obtained from the proposed GMBO were compared with eight other widely used optimization algorithms, including the Marine Predators Algorithm (MPA), the Tunicate Swarm Algorithm (TSA), the Whale Optimization Algorithm (WOA), the Grey Wolf Optimizer (GWO), Teaching–Learning-Based Optimization (TLBO), the Gravitational Search Algorithm (GSA), Particle Swarm Optimization (PSO), and the Genetic Algorithm (GA). The optimization results indicated the acceptable performance of the proposed GMBO, and, based on the analysis and comparison of the results, it was determined that the GMBO is superior and much more competitive than the other eight algorithms.

scholarly journals Modelling of Applied Magnetic Field and Thermal Radiations Due to the Stretching of Cylinder

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1077
Author(s):  
Muhammad Tamoor ◽  
Muhammad Kamran ◽  
Sadique Rehman ◽  
Aamir Farooq ◽  
Rewayat Khan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Fluid Velocity ◽  
Three Dimensional ◽  
Numerical Approach ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Boundary Layer Equations ◽  
Convective Parameter ◽  
Momentum And Heat Transfer ◽  
Dimensional Boundary

In this study, a numerical approach was adopted in order to explore the analysis of magneto fluid in the presence of thermal radiation combined with mixed convective and slip conditions. Using the similarity transformation, the axisymmetric three-dimensional boundary layer equations were reduced to a self-similar form. The shooting technique, combined with the Range–Kutta–Fehlberg method, was used to solve the resulting coupled nonlinear momentum and heat transfer equations numerically. When physically interpreting the data, some important observations were made. The novelty of the present study lies in finding help to control the rate of heat transfer and fluid velocity in any industrial manufacturing processes (such as the cooling of metallic plates). The numerical results revealed that the Nusselt number decrease for larger Prandtl number, curvature, and convective parameters. At the same time, the skin friction coefficient was enhanced with an increase in both slip velocity and convective parameter. The effect of emerging physical parameters on velocity and temperature profiles for a nonlinear stretching cylinder has been thoroughly studied and analyzed using plotted graphs and tables.

An Efficient Chaotic Salp Swarm Optimization Approach Based on Ensemble Algorithm for Solving Class Imbalance Problem

2021 ◽  
Author(s):  
Rekha G ◽  
Krishna Reddy V ◽  
chandrashekar jatoth ◽  
Ugo Fiore
Keyword(s):  
Feature Selection ◽  
Optimization Algorithm ◽  
Optimization Problems ◽  
Fitness Function ◽  
Class Imbalance ◽  
Optimization Approach ◽  
Class Imbalance Problem ◽  
Swarm Optimization ◽  
Adaboost Algorithm ◽  
Wide Range

Abstract Class imbalance problems have attracted the research community but a few works have focused on feature selection with imbalanced datasets. To handle class imbalance problems, we developed a novel fitness function for feature selection using the chaotic salp swarm optimization algorithm, an efficient meta-heuristic optimization algorithm that has been successfully used in a wide range of optimization problems. This paper proposes an Adaboost algorithm with chaotic salp swarm optimization. The most discriminating features are selected using salp swarm optimization and Adaboost classifiers are thereafter trained on the features selected. Experiments show the ability of the proposed technique to find the optimal features with performance maximization of Adaboost.

scholarly journals A Distributed Multifactorial Particle Swarm Optimization Approach

2021 ◽  
Author(s):  
Ahlem Aboud ◽  
Nizar Rokbani ◽  
Seyedali Mirjalili ◽  
Abdulrahman M. Qahtani ◽  
Omar Almutiry ◽  
...  
Keyword(s):  
Particle Swarm Optimization ◽  
Optimization Problems ◽  
Beta Function ◽  
Particle Swarm ◽  
Search Space ◽  
Optimization Approach ◽  
Multi Objective Optimization ◽  
Swarm Optimization ◽  
Multi Objective ◽  
New System

<p>Multifactorial Optimization (MFO) and Evolutionary Transfer Optimization (ETO) are new optimization challenging paradigms for which the multi-Objective Particle Swarm Optimization system (MOPSO) may be interesting despite limitations. MOPSO has been widely used in static/dynamic multi-objective optimization problems, while its potentials for multi-task optimization are not completely unveiled. This paper proposes a new Distributed Multifactorial Particle Swarm Optimization algorithm (DMFPSO) for multi-task optimization. This new system has a distributed architecture on a set of sub-swarms that are dynamically constructed based on the number of optimization tasks affected by each particle skill factor. DMFPSO is designed to deal with the issues of handling convergence and diversity concepts separately. DMFPSO uses Beta function to provide two optimized profiles with a dynamic switching behaviour. The first profile, Beta-1, is used for the exploration which aims to explore the search space toward potential solutions, while the second Beta-2 function is used for convergence enhancement. This new system is tested on 36 benchmarks provided by the CEC’2021 Evolutionary Transfer Multi-Objective Optimization Competition. Comparatives with the state-of-the-art methods are done using the Inverted General Distance (IGD) and Mean Inverted General Distance (MIGD) metrics. Based on the MSS metric, this proposal has the best results on most tested problems.</p>

scholarly journals Discrete Random Search Method ^|^ldquo;RasID-D^|^rdquo; for Optimization Problems

2004 ◽  
Vol 8 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Kotaro HIRASAWA ◽  
Hiroyuki MIYAZAKI ◽  
Jinglu HU ◽  
Kenichi GOTO
Keyword(s):  
Optimization Problems ◽  
Random Search ◽  
Search Method ◽  
Random Search Method

scholarly journals Constructing Synthetic Samples

2016 ◽  
Vol 32 (1) ◽  
pp. 113-127
Author(s):  
Hua Dong ◽  
Glen Meeden
Keyword(s):  
Optimization Problem ◽  
Search Algorithm ◽  
Random Search ◽  
The United States ◽  
Simulation Studies ◽  
Synthetic Sample ◽  
Population Means ◽  
Adaptive Random Search ◽  
Random Search Algorithm ◽  
Two Populations

Abstract We consider the problem of constructing a synthetic sample from a population of interest which cannot be sampled from but for which the population means of some of its variables are known. In addition, we assume that we have in hand samples from two similar populations. Using the known population means, we will select subsamples from the samples of the other two populations which we will then combine to construct the synthetic sample. The synthetic sample is obtained by solving an optimization problem, where the known population means, are used as constraints. The optimization is achieved through an adaptive random search algorithm. Simulation studies are presented to demonstrate the effectiveness of our approach. We observe that on average, such synthetic samples behave very much like actual samples from the population of interest. As an application we consider constructing a one-percent synthetic sample for the missing 1890 decennial sample of the United States.

Sign in / Sign up

Export Citation Format

Share Document