Dynamic Buckling of Laminated Anisotropic Spherical Caps

1995 ◽  
Vol 62 (1) ◽  
pp. 13-19 ◽  
Author(s):  
M. Ganapathi ◽  
T. K. Varadan
Keyword(s):  
Time History ◽  
Laminated Composite ◽  
Shell Element ◽  
Dynamic Buckling ◽  
Integration Scheme ◽  
Numerical Integration Scheme ◽  
History Of ◽  
Spherical Caps ◽  
Doubly Curved ◽  
Sudden Jump

The dynamic axisymmetric behavior of clamped laminated composite spherical caps subjected to suddenly applied loads is investigated using an eight-noded quadrilateral doubly curved shear flexible shell element based on the field-consistency approach. Geometric nonlinearity is considered using von Karman’s strain-displacement relations. The solution is obtained using the Wilson-θ numerical integration scheme. The pressure corresponding to a sudden jump in the maximum average deflection in the time history of the shell structure is taken as dynamic buckling pressure. A detailed parametric study is carried out to bring out the effects of shell geometries and material properties, number of layers, lamination schemes, and type of loading on a dynamic buckling load.

Numerical Modeling of Dynamic Sealing Behaviors of Spiral Groove Gas Face Seals

2001 ◽  
Vol 124 (1) ◽  
pp. 186-195 ◽  
Author(s):  
Bo Ruan
Keyword(s):  
Time Integration ◽  
Time History ◽  
Integration Scheme ◽  
Spiral Groove ◽  
Time Step ◽  
Dynamic Tracking ◽  
Face Seals ◽  
Tracking Motion ◽  
Time Integration Scheme ◽  
History Of

A numerical model is developed for the dynamic analysis of gas lubricated spiral groove face seals. Effects of the rotor runout, misalignment, face contact, as well as the stiffness and damping of the secondary seal are considered. Seal axial and angular motions and key parameters such as torque, power loss, and flow rate are obtained by a global time integration scheme, which traces the time history of the dynamic sealing behaviors. The analysis of gas film lubrication, face contact, and the seal dynamics is cast as an inverse problem and the solution is obtained iteratively at each time step. Dynamic tracking motion and key sealing characteristics of a representative spiral groove gas seal undergoing transient operations are presented.

PROGRAM OF PREDICTION AND MANAGEMENT OF COINTEGED DYNAMIC ECONOMIC PROCESSES BASED ON THE CYBERNETIC APPROACH

2019 ◽  
Author(s):  
Olena Bundak ◽  
Nataliia Zubovetska
Keyword(s):  
Computer Program ◽  
Pair Correlation ◽  
Time History ◽  
Critical Area ◽  
Concrete Object ◽  
Graphic Arts ◽  
Ex Post ◽  
History Of ◽  
Successive Change ◽  
Rms Errors

A method and computer program ConRow, which prognostication of development of the dynamically CPLD economic transients is executed by, is described in the article. Such prognostication of economic processes is very important in the cases when their development can result in undesirable consequences, that to go out in the so-called critical area. Extrapolation in a critical area with the use of information about the conduct of the system at an area, near to it, allows to estimate to the lead through of experiment in the critical area of his consequence. For the imitation of conduct of object the function of review is set on entrance influence. For a concrete object this function can express, for example, dependence of change of level sale from time-history of charges on advertising and set as a numeral row. Statistics as a result of analysis of row are represented in a table, where the level of meaningfulness is set statistician, and also parameters of the handed over criteria. The graphic reflection of information is intended for visualization of analysis. Here represented on the points of graphic arts, the crooked smoothing which are calculated as полиномиальные regressions is added. The best approaching is controlled by sight on the proper graph, and also by minimization of their rms errors. Models of prognostication by sight and as formulas represented on graphic arts, the middle is here determined tailings and their chance is checked up on statistics of signs. After the got models determined also and prognosis values of influences and reviews. Establishing an order models of Сr(p) of co integrate regression is carried out separate custom controls. The coefficient of clay correlation of ruФ shows by itself pair correlation between lines with a successive change in relation to each other on a size to лагу of l = 1, 2, 3 . The program was tested on the example of ex-post prognosis at establishing an integration connection and possibility of prognostication of growth of nominal average monthly settlings on the basis of these statistical indexes of consumer inflation in Ukraine.

scholarly journals Comparison of Novel Seismic Protection Devices to Attenuate the Earthquake Induced Energy

Actuators ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 73
Author(s):  
Osman Hansu ◽  
Esra Mete Güneyisi
Keyword(s):  
Lateral Displacement ◽  
Time History ◽  
Seismic Protection ◽  
Base Shear ◽  
Seismic Demands ◽  
Nonlinear Time History Analyses ◽  
History Of ◽  
Protection Devices ◽  
Nonlinear Time History ◽  
Better Than

This study addresses an alternative use of viscous dampers (VDs) associated with buckling restrained braces (BRBs) as innovative seismic protection devices. For this purpose, 4-, 8- and 12-story steel bare frames were designed with 6.5 m equal span length and 4 m story height. Thereafter, they were seismically improved by mounting the VDs and BRBs in three patterns, namely outer bays, inner bays, and all bays over the frame heights. The structures were modeled using SAP 2000 software and evaluated by the nonlinear time history analyses subjected to the six natural ground motions. The seismic responses of the structures were investigated for the lateral displacement, interstory drift, absolute acceleration, maximum base shear, and time history of roof displacement. The results clearly indicated that the VDs and BRBs reduced seismic demands significantly compared to the bare frame. Moreover, the all-bay pattern performed better than the others.

scholarly journals Development of a Field Deployable Firebrand Flux and Condition Measurement System

2020 ◽  
Author(s):  
Simone Zen ◽  
Jan C. Thomas ◽  
Eric V. Mueller ◽  
Bhisham Dhurandher ◽  
Michael Gallagher ◽  
...  
Keyword(s):  
Imaging Techniques ◽  
Time History ◽  
Infrared Camera ◽  
Thermal Conditions ◽  
Particle Characterization ◽  
Fire Dynamics ◽  
Rate Of Spread ◽  
New Instrument ◽  
History Of

AbstractA new instrument to quantify firebrand dynamics during fires with particular focus on those associated with the Wildland-Urban Interface (WUI) has been developed. During WUI fires, firebrands can ignite spot fires, which can rapidly increase the rate of spread (ROS) of the fire, provide a mechanism by which the fire can pass over firebreaks and are the leading cause of structure ignitions. Despite this key role in driving wildfire dynamics and hazards, difficulties in collecting firebrands in the field and preserving their physical condition (e.g. dimensions and temperature) have limited the development of knowledge of firebrand dynamics. In this work we present a new, field-deployable diagnostic tool, an emberometer, designed to provide measurement of firebrand fluxes and information on both the geometry and the thermal conditions of firebrands immediately before deposition by combining a visual and infrared camera. A series of laboratory experiments were conducted to calibrate and validate the developed imaging techniques. The emberometer was then deployed in the field to explore firebrand fluxes and particle conditions for a range of fire intensities in natural pine forest environments. In addition to firebrand particle characterization, field observations with the emberometer enabled detailed time history of deposition (i.e. firebrand flux) relative to concurrent in situ fire behaviour observations. We highlight that deposition was characterised by intense, short duration “showers” that can be reasonably associated to spikes in the average fire line intensity. The results presented illustrate the potential use of an emberometer in studying firebrand and spot fire dynamics.

Stationary and Transient Response of Cylindrical Shells Under Random Excitation

1988 ◽  
Vol 110 (2) ◽  
pp. 205-209
Author(s):  
A. V. Singh
Keyword(s):  
Transient Response ◽  
Random Vibration ◽  
Time History ◽  
Wide Band ◽  
Random Excitation ◽  
Mode Shapes ◽  
The Finite Element Method ◽  
History Of ◽  
The Mean ◽  
Random Vibration Analysis

This paper presents the random vibration analysis of a simply supported cylindrical shell under a ring load which is uniform around the circumference. The time history of the excitation is assumed to be a stationary wide-band random process. The finite element method and the condition of symmetry along the length of the cylinder are used to calculate the natural frequencies and associated mode shapes. Maximum values of the mean square displacements and velocities occur at the point of application of the load. It is seen that the transient response of the shell under wide band stationary excitation is nonstationary in the initial stages and approaches the stationary solution for large value of time.

Sign in / Sign up

Export Citation Format

Share Document